QA

Question: Where Is 2 7 8 On A Ruler

What is 7/8 on a ruler?

The 1/8 of an inch marks are the smaller marks found directly in between the 1/4 of an inch marks on the ruler. Between 0 and 1 inch, there are marks that denote 1/8, 1/4 (or 2/8), 3/8, 1/2 (or 4/8), 5/8, 6/8 (or 3/4), 7/8, and 1 (or 8/8) of an inch. In total, there are 96 of these marks on a 12 inch ruler.

What’s 7/8 of an inch on a tape measure?

Inch Fraction, Decimal and Millimeter Equivalents Fraction Decimal Millimeters 3 ⁄ 4 ” 0.75 19.05 13 ⁄ 16 ” 0.8125 20.6375 7 ⁄ 8 ” 0.875 22.225 15 ⁄ 16 ” 0.9375 23.8125.

What is the line after 7/8 of an inch?

1/16, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and the inch mark.

What is 0.7 on a tape measure?

The arrow is 0.7 cm, or 7 mm, past the beginning of the ruler.

What is half of 7 feet 8 inches?

Half of 7/8 (or 7/8 x 1/2) is 7/16.

How do I measure out 7/8 of a cup?

7/8 cup = 3/4 cup + 2 tablespoons. 1 cup = 16 tablespoons OR 8 fluid ounces = 1/2 pint.

Where is inch in ruler?

A ruler is 12 inches long, with inch lines along the edge of the ruler (1 is at the far left and 12 is at the far right, with every number in between in numerical order). The lines at the inch numbers are the longest lines along the edge of the ruler.

How do you measure inches by hand?

The first joint of an index finger is about 1 inch long. When a hand is spread wide, the span from the tip of the thumb to the tip of the pinkie is about 9 inches; from the tip of the thumb to the tip of the index finger, around 6 inches. It’s about 18 inches from the elbow to the tip of the middle finger.

How much inches is in a yard?

There are 36 inches (in) in 1 yard (yd).

Where is 0.75 on a ruler?

Fraction, Decimal, and Millimeter Equivalent Measurements Fraction Decimal Millimeters 11 ⁄ 16 “ 0.6875 17.4625 3 ⁄ 4 “ 0.75 19.05 13 ⁄ 16 “ 0.8125 20.6375 7 ⁄ 8 “ 0.875 22.225.

What is 0.71 on a ruler?

Fractional inches to cm & mm conversion table Inches CM MM 5/32″ 0.4 4 7/32″ 0.56 5.6 9/32″ 0.71 7.1 11/32″ 0.87 8.7.

How thick is .07 of an inch?

Thickness and Gauge Tables Thickness Comparison Table Thickness Imperial Metric Sheet of copier paper .003 in .07 mm Dollar bill .0043 in .1 mm Driver’s license / credit card thickness .03 in .76 mm.

How big is an inch on your finger?

One inch (2.5 cm) is roughly the measurement from the top knuckle on your thumb to your thumb tip. Measure yours to see how close it is to 1 inch.

How long is your thumb?

The most common object used to estimate inches is the adult thumb, which is about 1 inch wide.

What can I use if I don’t have a ruler?

Tuesday Tip – How to Measure Without A Ruler 1) Dollar Bill. The bill is just shy of being a perfect measure. 2) Credit Card. The average credit card makes a nice sturdy ruler. 3) Quarter. Makes a pretty darn good 1″ measure. 4) Paper! We all remember learning as a kid, a regular sheet of paper measures: 5) Your Thumb.

What is half of 7 in inches?

1 Expert Answer Liz, half of 7 is 3 1/2, and 1/2 foot is 6 inches. Half of 10 inches is 5 inches.

What is 7 in a half?

Half of 7 would be 3 1/2, or in decimal form, 3.5. Finding ‘half’ of a number is the same as dividing by 2.

What is the half of 7.5 cm?

Hence the half of 7.5 is 3.75.

How do you measure mm on a ruler?

Locate the zero end of the ruler, and then count each individual mark along the edge of the ruler. Each mark represents 1 millimeter or mm, so counting five marks is the same as counting 5 millimeters, counting 10 marks is the same as counting 10 millimeters and so on.

What is .8 of an inch in fraction?

Inch Fraction Conversion Chart – Fraction Decimal and Metric Equivalents Fraction (inches) Decimal (inches) Metric (millimeters) 5/64″ 0.078125″ 1.984375 mm 3/32″ 0.09375″ 2.38125 mm 7/64″ 0.109375″ 2.778125 mm 1/8″ 0.125″ 3.175 mm.

What is .62 on a tape measure?

Inch/mm equivalents table inch/64 Fractional inch Decimal inch 59 59/64 0.921875 60 15/16 0.9375 61 61/64 0.953125 62 31/32 0.96875.

What is 7/8 of a cup of sugar?

Sugar cup gram oz 3/4(0.75) cup 170 g 6 oz 7/8 (0.875) cup 198 g 7 oz 1 cup 227 g 8 oz.

How many grams is 7/8 of a cup?

175 grams Cup Grams 2/3 cup 135 grams 3/4 cup 150 grams 7/8 cup 175 grams 1 cup 200 grams.

What is 7 over 8 as a percent?

Fraction to percent conversion table Fraction Percent 4/8 50% 5/8 62.5% 6/8 75% 7/8 87.5%.

Whats an 8th of an inch?

The decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch. Inches fractional decimal Eights 1/8 0.125 1/4 0.250.

How many eighths of an inch are in one inch?

The bottom number is how many parts make a whole. 1/8 means you have 1 and it takes 8 for a whole. You need seven more eighths to make 1 whole inch.

How many mm is an 8th of an inch?

Conversion table inches to mm Dimensions — Inches to Metric 0.125” 1/8” 3.18 mm 0.188” 3/16” 4.78 mm 0.250” 1/4” 6.35 mm 0.313” 5/16” 7.95 mm.

How big is half and inch?

a half of an inch, equal to 1/24 of a foot (1.27 centimeters).

What are the lines between inches?

The number of lines between inch marks indicate how precise you can get with your tool. To read 1/2-inch measurements, locate the second-longest mark between the longer inch marks. For 1/4-inch marks, look halfway between the 1/2-inch marks. You can read smaller fractions of an inch the same way.