Table of Contents
Is Henry feather finish the same as ardex?
The Henry Feather Finish is the same stuff as is in this Ardex bag. They are made by the exact same company -just different packaging. I found the Henry at Home Depot. You just have to search because different territories in the US carry different products and brands.
How much is a bag of ardex?
Compare with similar items This item Ardex Feather Finish Grey/Gray/Gris Self-Drying Cement Based Pack of 4 Bags 10 Lbs Ardex Feather Finish Grey/Gray/Gris Self-Drying Cement Based Bag 10 Lbs Price $11296 $3734 Sold By Carpets & More Direct Carpets & More Direct Item Dimensions 4.25 x 7 x 10 inches 10 x 4.3 x 7 inches.
Is ARDEX FEATHER FINISH waterproof?
ARDEX FEATHER FINISH – Laminate Floors and Waterproof Flooring-Carpet-Wood-Tile-Parquet-Soundproofing-Vinyl-Porcelain in Miami Florida Talula Floors.
What is ARDEX FEATHER FINISH used for?
ARDEX FEATHER FINISH® is an underlayment formulated from a blend of Portland cement and other hydraulic cements that provides a smooth, permanent finish for a variety of substrates prior to the installation of today’s demanding floor coverings, including sheet vinyl and VCT (vinyl composition tile).
How thick can you apply ARDEX FEATHER FINISH?
ARDEX FEATHER FINISH can be easily applied with a steel trowel, and used at a true feather edge, or up to 3mm in thickness. For thicknesses of 3mm, and not exceeding 12mm, it is recommended to build up in thin applications or alternatively consult the ARDEX ARDURAPID A 45 datasheet.
How long does ARDEX FEATHER FINISH last?
This is very simple and though it’s a bit of a nuisance to have to re-do a project, it really should be something that you can get at least two years out of before re-doing.
How many square feet does ardex?
Coverage: 16.7 sq. ft. per bag at 1/4”, 33.3 sq. ft.Technical & Specification Documents. Brand Ardex SKU 226757.
What is feather finish concrete?
ARDEX FEATHER FINISH is ideal for patching and smoothing minor surface damage to levelling and smoothing compounds i.e. footprints and trowel marks. Floorcoverings can be installed after as little as 15 minutes. True feather edge allows for greater coverage. Cost effective – up to 50m² coverage per 11kg bag.
Can ardex feather finish be stained?
Do you? I haven’t used this yet, but you can stain with the Ardex SD-M stain and it will adhere. Apparently, other stains will not work.
Does Ardex grout need to be sealed?
While not required, a penetrating grout sealer can be applied. Follow sealer manufacturer’s recommendations for substrate preparation, application and cure. Please note that ARDEX FL must set a minimum of 72 hours (70°F / 21°C) prior to being submerged in water.
How thick can ardex be installed?
ARDEX K 521™ is a pourable, polishable, self-leveling topping for fast-track resurfacing of indoor concrete. ARDEX K 521 can be installed from a minimum thickness of 3/8″ (9 mm) up to a maximum thickness of 2″ (5 cm). Use ARDEX K 521 to provide a polished, “aggregate-exposed” surface.
Can you sand ARDEX FEATHER FINISH?
The final coat when dry should be sanded as smooth as possible before putting on color or sealant. I would allow 1 day between coats. Ardex Feather Finish dries really fast, but better to give it 24 hours to be sure. The final coat when dry should be sanded as smooth as possible before putting on color or sealant.
Is ARDEX FEATHER FINISH flexible?
A flexible sealing compound such as ARDEX ARDISEAL™ Rapid Plus Semi-Rigid Joint Sealant may be installed. b. ARDEX FEATHER FINISH will provide a solid surface to which new flooring can bond, but cannot change the fact that a weak substrate lies below.
Can ardex be used outside?
ARDEX X 90 OUTDOOR can be installed over substrates with temperatures as low as 40˚F (5˚C) and can withstand driving rains or be grouted in only 2 hours.
Can you use ARDEX FEATHER FINISH on walls?
ARDEX PANDOMO® W1 is a self-drying, trowel applied finishing compound for walls and ceilings.
What is the PSI of ARDEX FEATHER FINISH?
Using advanced Portland cement chemistry with a self-drying matrix, ARDEX SD-P is ideal for patching and reaches a compressive strength of 4200 psi. It was developed to reduce curing time on pressed-for-time jobs.
Does ardex k15 need primer?
Standard absorbent concrete must be primed with ARDEX P 51™ PRIMER diluted 1:1 with water. Apply evenly with a soft bristled push broom. Do not use paint rollers, mops or spray equipment.
Can you epoxy over ardex?
ARDEX K 15® is the original and the most specified self-leveler in North America. Install over: interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems, wood, metal and non-water soluble adhesive residue on concrete; can be installed over concrete treated with certain curing compounds.
Can you epoxy over self-leveling concrete?
Another huge benefit to using epoxy for a self-leveling overlay is the fact that epoxy itself is a sealer. In theory, assuming your floor doesn’t require more than one coat of epoxy self-levelling overlay, you could do one coat and your floor would be level, sealed and the colour you want.
What color is Henry feather finish?
Technical Details Manufacturer Ardex Size 7 lb Color Gray Material Wood Power Source Air Powered.
