Table of Contents
Why does my Exmark mower won’t start?
An Exmark mower will not start because of a fuel or air restriction caused by a dirty carburetor, clogged fuel line, bad fuel pump, or plugged filters. A bad battery, charging system problem and faulty safety switch can also prevent your Exmark from starting.
How many hours will an Exmark Lazer Z last?
Exmark uses a hydraulic pump to wheel motor drive design. Prior to 2009 these systems would last on average 1,000 hours. This design has changed drastically in 2009 when they combined these two units into one, eliminating hydraulic lines. These components have meeting their life expectancy of 1,500 – 2,000 hours.
Where is Exmark located?
Today, it is the leading manufacturer of commercial mowers for the landscape professional. The company began its manufacturing operation with seven employees in a garage-type building located just south of Beatrice, Nebraska.
How do you reset the oil light on a Gravely lawn mower?
To reset, hold the reset button (2) for 5-8 seconds until the meter reads all zero’s (“00000”). You may push the button to switch between modes until you’re back to the Hour Meter display.
Why does my Exmark keep shutting off?
An Exmark may start and then die while mowing when the mower is no longer able to get fuel or air to the engine due to plugged filters, clogged fuel lines, bad fuel pump or a dirty carburetor. An insufficient engine oil level, clogged cooling fins and a plugged mower deck can also cause your Exmark to stop running.
How many years will a zero turn mower last?
ashgrove landscaping: Between 1,500 and 2,000 hours and about three to four years.
Are Exmark mowers worth the money?
Exmark mowers are popular for quality components, delicate manufacturing, and outstanding power. Exmark mowers aren’t just good, they are a great addition to the list of machines your property needs. They are producers of lawnmowers that pack a lot of power, speed, and durability.
How many hours can a commercial zero turn mower last?
It’s reasonable to assume that any commercial quality mower will give good service for a thousand to two thousand hours, meaning hardly any breakdowns, and only routine replacement parts and service being needed. After a couple of thousand hours, the mower can be expected to need occasional repairs.
Are Exmark mowers made in China?
Exmark mowers are made in the United States from the manufacturer’s Gage County Industrial Park facility situated in Beatrice, Nebraska.
Are Exmark engines any good?
“The Exmark engines have been refined and proven through extensive durability and field testing,” Walters says. “We also tested the engines against similar engines from other manufacturers. Multiple comparison tests were made in heavy grass using identical mowers fitted with competitive engines.
What year did Exmark mowers come out?
Exmark Manufacturing was incorporated in May 1982 as an independent manufacturer of professional turf care equipment. At that time, the company focused on manufacturing a line of mid-size walk-behind mowers and turf rakes.
Can you reset a hour meter on mower?
We suggest you remove the key when you are finished with the mower. The hourmeter, like a car odomometer, can not be reset or turned back. The only options are to make notes of what the correct hour(s) should be or to replace the hourmeter, this is not a warranty failure.
How do you know if the ignition switch is bad on a lawn mower?
To check your ignition switch, you can use an ohmmeter to see if there is any connection between the “S” and “B” terminals. If there isn’t any, the ignition switch is your problem and you will need to replace it to get your mower running properly again.
How do you check an ignition switch?
Put the ignition key into the ignition switch and crank the engine. If the engine cranks, then your ignition switch is obviously working fine. If the engine does not crank, and you hear a “click” when you first turn the key to the “III” position, then your ignition switch is not the problem.
When I turn the key on my lawn mower and nothing happens?
Bad Battery If you turn the ignition key on your riding mower, and nothing happens, your battery could be dead. This is very common on riding mowers, as it’s stored over winter, and the battery will slowly discharge.
How do you adjust the deck on a Exmark Lazer Z?
Deck Leveling Position mower on a flat surface. Stop engine, wait for all moving parts to stop, and. Check tire pressure in drive tires. Set anti-scalp rollers to top holes or remove them. Raise the deck to the 4 1/2 inch (11.4 cm) height. Lower the deck to the 1 1/2 inch (3.8 cm).
Which is better Ferris or Exmark?
The Exmark gets it done much faster, definitely more steel in the Exmark. I have a Ferris it rides smooth , but if the grass gets a little long or damp it plugs up under deck. Have to have a loader to lift up front of mower to clean out under deck.
Is 1500 hours a lot for a mower?
With proper care and maintenance, you can expect a lawnmower to be working well for many years. An average riding mower can last for ten to fifteen years, or in hours 1000 to 1500. Not well maintained, you can expect half of that. There is no set rule to define how many hours are enough on a riding lawnmower.
Is 1200 hours a lot for a mower?
A typical mower could clock up 1.5 hours cutting once a week, for 8 months – that’s just 48 hours a year, and a mower well maintained will live 15 + + years. As a rough rule of thumb, a single-cylinder mower with 500-750 hours would be considered a high miler, but that’s not to say it’s all worn out.
