Table of Contents
Why is my Whirlpool fridge not getting cold?
Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.
Why is my Whirlpool fridge not cooling but freezer works?
When you find your Whirlpool refrigerator not cooling but freezer works fine a defective evaporator fan motor is a common part malfunction. This motor powers the fan that blows cold air over the refrigerator coils. Without this fan refrigerant won’t cool enough to maintain the refrigerator’s temperature.
What would the symptoms of a dirty coil be?
One thing that will be noticeable when the evaporator coil is dirty is that your AC won’t produce air that’s as cold as it should be. When the heat transfer is reduced, the efficiency of the cooling process is impacted. If it becomes clear that the AC isn’t cooling your air, have the evaporator coil inspected.
Where is the base grill on a Whirlpool refrigerator?
This kickplate grille is attached to the bottom of the refrigerator. This kickplate grille is attached to the bottom of the refrigerator.
How often should condenser coils be cleaned?
Keep your system working efficiently by cleaning the air conditioner coils at least once a year and following preventative measures to keep them clean during use.
Where is condenser coil located?
The evaporator coil is located within the plenum of the indoor portion of the cooling system, while the condenser coil is located within the outdoor portion. The evaporator coil doesn’t produce cold; instead, it takes away heat by absorbing the latent heat within the air using the refrigerant within the coils.
Where is the evaporator coil located?
An evaporator coil is the part of an air conditioner or heat pump that absorbs the heat from the air in your house. It is located inside the air handler or attached to the furnace.
Where is the condenser fan on a refrigerator?
Where It’s Located: The condenser fan is located in the bottom cabinet by the compressor and the condenser coils. It is important to note that refrigerators with condenser coils on the back will not have a fan.
Do new refrigerators have coils?
Locate the coils, which live either at the bottom of the appliance or in back of it. Older models have exposed coils mounted on the back of the refrigerator. Newer models place the coils at the bottom behind a toe space panel (like the model below) or at the back behind a rear access panel.
Is there a reset button on a Whirlpool refrigerator?
Some Whirlpool refrigerators allow a soft reset. If your Whirlpool refrigerator is not functioning correctly, locate the door switches inside the refrigerator. Once you find them, press and release them. The fridge display will temporarily go blank and then kick back into normal operation.
What would cause a refrigerator to stop getting cold?
Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). Plug in the fridge and make sure the fan runs when the compressor is running.
How do you reset the compressor on a Whirlpool refrigerator?
4 steps to reset a refrigerator compressor Unplug your refrigerator. Turn off the refrigerator and freezer from the control panel. Reset your freezer and fridge temperature settings. Wait for the refrigerator temperature to stabilize.
How do I put my Whirlpool refrigerator in diagnostic mode?
To start with we need to start the refrigerator’s diagnostic mode. To do this open the refrigerator door and press one or both door switches, depending on your refrigerator type. Next press the refrigerator temperature (+) button three times in ten seconds and release the light switch or switches.
Why is my refrigerator warm but freezer cold?
Common solutions for: Refrigerator freezer is cold but refrigerator is warm. If the evaporator fan is not working, the freezer or refrigerator will not cool adequately. To determine if the evaporator fan motor is defective, try turning the fan blade by hand. If the fan blade does not turn freely, replace the fan motor.
What happens if condenser is dirty?
With a dirty condenser, the condenser will reject enough heat at the elevated delta T to keep the system running; however, the system will run inefficiently because of the higher condensing temperature and pressure, causing high compression ratios.
How much does it cost to clean condenser coils?
It’ll cost anywhere from $100 to $400 to clean your AC coils as a standalone service. For highest system efficiency, get this done every year and up to once per month. Condenser coil cleaning, the one located outside your home, happens during your annual AC tuneup for $75 to $200.
What happens when condenser coil is dirty?
A dirty condenser coil with have a reduced ability to transfer heat to the outside air and this can lead to a less effective cooling system. A dirty condenser coil forces the unit to work harder, which leads to more wear and tear on the system.
What is the knob on the bottom of my refrigerator?
Many refrigerator models have knobs used to raise or lower temperature. If the knob gets jolted, it could increase your refrigerator’s temperature, reducing the cooling effect. All you have to do is to get back the thermostat settings to normal, and it will resume optimal performance.
