Table of Contents
Quarter Round: Where Baseboard Meets the Floor. Shoe moulding and quarter round appeal to homeowners because they add a bit of sophistication and style to baseboards and frames. They also allow designers and homeowners to build seamless and smooth transitions between floors, walls, and counters.
Is it necessary to use quarter round?
One of the most common questions people ask is if they really need the base shoe, or if it’s just an add on. The answer is a simple yes. Without it, there is typically a gap between the trim and flooring, which is not only unattractive but makes it extremely easy for dirt and debris to build up under the base trim.
Do I have to use quarter round when installing laminate flooring?
No you never need to use quarterround. I try to do all installs without using it. 2 best options: Slice out the bottom .
What kind of quarter round should I use?
If you are laying quarter round on a ceramic, vinyl, or stone tile floor, you should paint the quarter round to match the baseboard molding. The most common trim color is white, and so this most often will lead to a white quarter round trim.
Can I use quarter round instead of baseboard?
Sure, you can use quarter round without a baseboard as long as the crack you’re covering stays behind the quarter round. It is a plain, simple, clean look.
What is the difference between shoe molding and quarter round?
Shoe molding is much the same as quarter round, having the same 90° angle on the backside but instead of being a perfect quarter radius, its profile is a bit more squat. Using shoe molding gives the floor installer more latitude in their end cuts and also allows the trim carpenter to hide un-level floors.
How much quarter round is needed?
determine the perimeter of your room: add the length and width measurements together and multiply by two. Measure the width of each archway and doorway, and add together. subtract the total of the doorway widths from the room perimeter to determine the total required length of wall trim and quarter round molding.
Should you glue or nail quarter round?
A: Quarter-round should be nailed to the base boards only. It is intended to hide gaps between the base and floor. It should also permit a little movement in the flooring. Plus, it absorbs the impact of feet and furniture legs, so you may want to replace it sometime—thus, don’t glue it.
Is it better to remove baseboards when installing laminate flooring?
For convenience, proper floor installation, and to save money, remove the baseboard during the installation process and reuse it with the new flooring. Since most types of laminate are not secured to the subfloor, the baseboard will help hold it securely into place.
Which way do you run laminate flooring?
In what direction should you lay a laminate floor? In most cases, you should lay your laminate flooring parallel to the longest side of the room or your home. This will create a more natural flow and will accentuate the length of the room better.
Do you paint shoe molding before installing?
Many experts say that it’s wise to paint the trim before you install it. It’s a fast and easy process that can dramatically speed up paint time. People who paint trim before installing tend to place the boards on sawhorses over a drop cloth to work.
Should there be a gap between shoe molding and floor?
Usually 3/8- 1/2 inch around the floor perimeter. The size of the gap is such that standard floor molding can span this gap so it is not seen. It’s always a good idea to keep this gap open and clear.
What color should floor trim be?
For classic or traditional interiors, using a white or off-white paint can really play up the trim and bring out its historical or intricate qualities. And many design experts consider white the perfect color for any trim, regardless of interior style or wall color.
What type of baseboards are in style?
Solid wood finger jointed wood, and MDF (medium-density fiberboard) baseboards are among the most popular material choices. Choosing the material often comes down to budget or color preference, so it’s easier to determine which material is right for your house.
How do you put down quarter round without a nail gun?
How to install quarter round without a nail gun but with a hammer Step 1: Sweep dirt and debris. Step 2: Lay the quarter round flush against the baseboard. Step 3: Nail it! Step 4: Continue nailing. Step 5: Install more counter-rounds.
Should I caulk quarter round?
To Install Quarter Round Use Nails Not Caulk Installing quarter round on baseboards with caulk is not a good idea because it can be difficult to remove should you need to repair the floor in the future.
How big of a gap will quarter round cover?
Quarter Round: A quarter round molding is one of the most common types of molding you’ll come across. It’s typically ¾” inches by ¾” inches and is used to cover the expansion gap between the floor and a wall, baseboard, or toe kick.
When should I use shoe molding?
Moldings are used to cover the expansion area, to hide cut ends, to adjust height differences or transitions between floors and to aesthetically finish the area.” Using shoe molding gives the floor installer more latitude in their end cuts and also allows you to hide the expansion gaps between the wall and the floor.
How much should I charge for baseboard installation?
The labor cost to install baseboards is $4.90 to $7.75 per linear foot. Baseboard materials are pretty inexpensive (only about $0.80 to $1.20 per linear foot).
How much trim is in a house?
Average Trim Costs The national average cost of installing trim in a house is $1,310, with a typical range between $604 and $2,049. The cost at the low end is $200, and the high-end cost is $5,200. Trim and molding are woodwork elements that embellish a home’s floors, walls and ceilings.
Can you hammer in quarter round?
Hammer the nail through the quarter-round and into the baseboard with a hammer. The finishing nail is thin enough to not split the quarter-round and long enough to anchor the molding.
