Table of Contents
Should you use pulls or knobs on kitchen cabinets?
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.
Can you mix knobs and pulls on kitchen cabinets?
Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.
How do you decide on pulls or knobs?
Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter. Large Drawers that are 30” to 48″will require a pull that is longer than 8″ or a knob that is 1″ in diameter or greater. Using two pulls or knobs for a large drawer also works great.
Where do you put knobs and pulls on kitchen cabinets?
Cabinet knobs are placed opposite of door hinges. On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.
Should cabinet pulls be vertical or horizontal?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.
How long should Pulls be on cabinets?
While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
What hardware looks good on white cabinets?
Hardware on white cabinets will stand out and steal the show, so it’s a great opportunity to go bold! If you have warm tones, go with gold, black, or bronze hardware. If you have a cold grey tone, then silver, pewter, black, and stainless steel hardware will work.
What type of cabinet knobs are in style?
Here are some of the most popular ones. ROUND. The most popular kind, this shape can be used for both cabinet doors and drawers. SQUARE. The slightly less traditional version of the round knob, square knobs add a contemporary finish to your kitchen cabinets. OVAL / FOOTBALL. PULL KNOB / T-KNOB. NOVELTY. ORNATE.
Where should Pulls be placed on cabinets?
Pulls. Pulls are another versatile option that can be installed on both cabinets and drawers. For both upper and lower cabinets, the pulls should be installed vertically 2 ½ – 3 inches in from the corner of the door. For drawers, they should be installed horizontally in the center of the door.
Should cabinet handles be the same size?
Consistent Size Throughout There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably.
Do you put pulls on fake drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
Should kitchen handles be vertical or horizontal?
The universal rule is that handles are placed vertically on doors and horizontally on pull-out drawers. Stand in your new kitchen and hold your handles against the drawers and cabinet doors to try out different heights and positions for each of them.
Where do you put cup pulls on drawers?
Cup Pulls: Cup pulls are only ever used on drawers, and I like to center them in the middle of the drawer slab. If you have a 5 piece drawer (top and bottom rails, inside panel, and side rails) you want to make sure the hardware itself will fit (centered) in the middle panel before purchasing and installing.
What handles go with Shaker cabinets?
The simplest way to adorn your Shaker cabinetry is to use only knobs on all the cabinet doors and drawers. To achieve a classic or vintage look, circular glass or ceramic knobs are most appropriate.
How long should bar pulls?
Bar Pulls are traditionally measured center-to-center and they should not exceed 1/3 of the length of a cabinet door or width of a drawer. Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall.
What size pulls for 36 inch drawers?
Oversize Drawers (36″ or larger) For larger drawers, consider investing in longer-length stainless steel pulls such as 6”, 8”, 10” or even 12”. Another alternative to this is by using double smaller pulls, such as two 3” or two 5” pulls.
What are Shaker cabinets?
In the world of cabinetry, shaker cabinets are units that are simple but aesthetically pleasing. Shaker cabinet doors are cope-and-stick construction and recessed panel doors with simple and clean inside and outside edges. This cabinet style is known for its minimalistic look when placed in a kitchen or bathroom.
