Table of Contents
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.
Are knobs or pulls better?
In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.
Should I mix knobs and pulls?
Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.
Do you put knobs on drawers or cabinets?
Knobs can be placed on both cabinetry doors + drawers. Mounted on the door stile, cabinetry knobs are placed on the opposite side of the door hinge + typically 2-½” to 3” from the bottom corner of the door for upper cabinets. While on base cabinets knobs are usually placed 2-½” to 3” from the upper corner of the door.
Should kitchen cabinets have handles or knobs?
The general rule of thumb is that knobs are best for cabinet doors, though occasionally you can break the rules. “We might do a single knob on a smaller drawer,” says Gorsline.
Can you use knobs and pulls on kitchen cabinets?
Can you mix pulls and knobs on cabinets? Yes! For a cohesive look, pick matching finishes and install the same kind of hardware on drawers versus cabinet doors. If you want to mix and match pulls and knobs in your kitchen, opt for pulls on drawers and knobs on doors.
Can you put knobs on kitchen drawers?
Yes, you can put knobs onto your kitchen drawers! The installation process is very easy, and many individuals even prefer it over installing traditional pull handles. The trickiest part might be deciding where to place the knobs on the drawers and placing them in the same spot on every drawer.
Should my kitchen cabinet pulls match my faucet?
Most of the time the kitchen faucet should match cabinet hardware!” But, sometimes strategically placing different metals next to each other can work for you, add interest or even make a statement.
Can I use different size pulls on kitchen cabinets?
One of the most popular options is to pick one size and use it throughout your cabinetry. There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes).
Should hinges match cabinet knobs?
Should hinges match door knobs? And there’s no hard and fast rule when choosing, generally if your hinges are exposed they should match your handles and knobs finishes. You can easily hold the hinges and knobs or handles against the finish of your doors and cabinets to see which colours and styles go best together.
Do cabinets look better with hardware?
Cabinet hardware should match existing metalwork such as your sink faucet, or appliances. This creates a unified look in any kitchen or bathroom. There is a time and place to mix and match finishes… but not with hardware.
Where do pulls go on kitchen cabinets?
Pulls are another versatile option that can be installed on both cabinets and drawers. For both upper and lower cabinets, the pulls should be installed vertically 2 ½ – 3 inches in from the corner of the door. For drawers, they should be installed horizontally in the center of the door.
Where do you put knobs on cabinets?
Cabinet knobs are placed opposite of door hinges. On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.
Should kitchen and bathroom hardware match?
The cabinet fixtures and hardware in a bathroom do not have to match the faucets. Matching all the hardware to each other is the safest way to make sure the fixtures look cohesive. It’s amazing how something as small as faucets and hardware can alter your bathroom’s entire look.
Should cabinet pulls be vertical or horizontal?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.
Should faucets match knobs?
Does cabinet hardware have to match your faucet? No. But, traditionally kitchens and bathrooms will match hardware finishes to the faucet to tie the finishes in the room together. Matching cabinet hardware to your faucet creates a cohesive look.
Do faucets need to match door handles?
All of your faucets and doorknobs don’t have to match throughout your house. You can select one metal for your kitchen and another for your bathroom. So if you don’t want to give up a ton of control, you can still get creative with your designs. You can swap out one or two faucets if they’re all the same metal.
Can you mix brushed nickel and oil rubbed bronze?
It is certainly fine to match everything, but can be a little too bland. A different finish on a light fixture or island hardware adds personality & verve to the interior.
What is the rule of thumb for cabinet hardware?
An oversized cabinet door or drawer needs a large piece of hardware for proper functionality. A good rule of thumb for traditional or transitional style pulls is that they should be about one-third of the length of the cabinet drawer. Drawers larger than eighteen inches wide may require more than one pull or knob.
What size should cabinet pulls be?
Determine Size While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
What size pulls for 36 inch drawers?
Oversize Drawers (36″ or larger) For larger drawers, consider investing in longer-length stainless steel pulls such as 6”, 8”, 10” or even 12”. Another alternative to this is by using double smaller pulls, such as two 3” or two 5” pulls.
