Table of Contents
When to Replace Your Belt Tensioner You should expect to replace your belt tensioner in the 40,000-70,000 mile range. It is also customary to swap more than one part simultaneously, usually a worn-out pulley from other systems and even the serpentine belt itself.
How do you know if your serpentine belt tensioner is bad?
The symptoms of a loose serpentine belt include a loud squealing noise when the engine is started or when the steering is turned all the way to one side. A serpentine belt that keeps slipping off the pulley is another symptom of a bad tensioner.
How long does a tensioner pulley last?
Most modern cars that roll off the dealer’s lot as a new vehicle will have a 60,000 to 100,000-mile life expectancy for the serpentine belt, tensioners, and idler pulleys.
What happens if belt tensioner fails?
When the tensioner or tensioner pulley fails, the loss of tension can cause the belt and pulleys to make high-pitched rattling or chirping noises. If the pulley bearing completely fails, it can also cause a squealing or even a grinding noise. Symptom 2: Knocking or slapping. This can cause a slapping or knocking noise.
How much does it cost to replace a belt tensioner?
To get the belt tensioner replaced, you will pay anywhere from $140 to almost $400. The price of parts and labor varies from one car to the next, with most labor costs coming in at about $70 or $80.
How do you know if you need a new tensioner pulley?
Listen for a fluttering” noise while driving or while the car is idling. This indicates the tensioner is too loose. Other noises such as squealing or whirling from the front of the engine mean the spring inside the tensioner is weakening. In this case, the belt tensioner needs to be replaced.
Should I replace idler pulley and tensioner?
If there is any wobble, squeak, or undue friction, the idler pulley should be replaced. The best way to maximize the idler pulley’s lifespan is to maintain proper tension on the serpentine belt and replace belts with new ones whenever required.
What is the life expectancy of a serpentine belt?
Serpentine belts are built to last—much longer than before because of advancements in rubber technology. Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles.
What causes a tensioner to fail?
Excessive arm movement or bounce due to a worn damper: The damper moderates the action of the tensioner spring in much the same way that a shock absorber dampens a vehicle’s suspension. As the damper wears, the tensioner arm can bounce away from the belt, causing excessive belt slippage.
Do belt tensioners wear out?
Tensioners And Belts Do Wear Out Because, the tensioner drives the belt, wear on both will happen at some point. So, having either one fail could cause a multitude of problems.
Why is my belt tensioner shaking?
Causes of Belt Tensioner Wobbling In general, belt tensioners tend to get noisy when they fail. If your belt tensioner is chirping or makes other noises, it is often an indication that the part is old and needs to be replaced. You can even remove the belt, spin each pulley, and listen for rumbling or other noises.
Can a bad belt tensioner cause misfire?
The belt may oscillate between too little tension and too much tension. The belt will slip and catch, causing noise and vibration. This can cause a change in crankshaft speed that can be severe enough to cause the engine management system to think that a misfire just occurred.
Is it hard to replace a belt tensioner?
Serpentine belt replacement is easy because today’s automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just rotate the tensioner, remove the old belt and install a new one.
How long does it take to replace a serpentine belt and tensioner?
It can take anything from 15 minutes to an hour (two at the most) to repair or replace a bad serpentine belt with a new belt.
Can a belt tensioner making noise?
If any tensioner pulley begins to wear out with time, it’ll create more of a chirping noise. You’ll also hear the chirping noise if the pulley grooves are damaged. This happens over the years due to friction, leading to cracks in the belt.
How can you tell if a pulley belt is bad?
Symptoms of a Bad Timing Belt Pulley Shaky, or Otherwise Incumbered Belt Motion. Visible Wear On Your Pulleys. Belt “Squealing” or “Whining” Noises. Knocking or Slapping Noises. Damaged Bearings or Pulleys. What if the Pulley Seems Fine, But There’s Still an Issue? Need to Replace Your Timing Belt Pulleys?.
Should I replace belt tensioner with belt?
There is no recommended timeframe in which to replace your tensioner, especially as the belt itself usually needs replacing before the tensioner does. However, you should inspect your tensioner each time you service your car to monitor its condition and replace it if necessary.
Should I change belt tensioner with belt?
You should replace the tensioner and any other component that runs with the belt at the same time. The parts have a time/milage life that you ignore at your peril. Get a service kit from one of the many quality o/e manufacturers.
