QA

Question: When Installing A New Device, Which Statement Is Accurate

Table of Contents

What is the official standard for USB interfaces?

The official standard for USB interfaces is called IEEE 1394.

What happens when a flash memory card is installed in a slot and it is recognized by Windows quizlet?

Every installed device requires a device driver to control the device. What happens when a flash memory card is installed in a slot and it is recognized by Windows? a drive letter is assigned to the device and you can see it in Explorer. Which type of video port provides a digital-only signal?.

What is a basic principle that applies to both internal and external devices group of answer choices?

What is a basic principle that applies to both internal and external devices? -Every device is controlled by software.

What should you install in a server room that will save space by allowing you to control multiple servers with a single mouse?

A KVM switch allows you to use one monitor, mouse, and keyboard for multiple computers.

What is the newest USB standard called?

USB 3.2 Gen 2×2: formally known as USB 3.2, it’s the newest and fastest spec, promising speeds at up to 20Gbps (by using two lanes of 10Gbps at once).

What does B stand for in USB?

noun. 6. 2. USB is defined as an acronym that stands for Universal Serial Bus which is a type of computer port which can be used to connect equipment to a computer.

What statement regarding the construction of a gaming computer is accurate?

What statement regarding the construction of a gaming computer is accurate? Gaming computers benefit from powerful multicore processors. What part of a printer pushes forward a sheet of paper from the paper tray?.

Which slot type would you install a video card in to get the best performance?

In general, the first PCI Express slot on your motherboard will be the best one to install your graphics card into. The first slot will usually be a fully-decked PCIe x16 slot that will allow your graphics card to run at its full performance, and it may be one of the only x16 slots available on the motherboard.

Which of the following represents the correct order in which you should install components into the case after disassembling a computer?

in what order should you install components into the case after disassembling a computer? power supply, drives, motherboard, cards.

Which factor might you consider when buying a computer?

Five Things to Consider When Purchasing a New Computer What will the PC be used for? This question should always be asked first whenever considering a new PC. How much memory does the PC come with? How much storage do you need? How much processor do you need? Do you need a dedicated graphics card?.

What icon might you see in Device Manager that indicates a problem with a device *?

Exclamation mark or other devices When a device has a yellow circle with an exclamation mark under Other devices, this indicates that the device is conflicting with other hardware. Or, it may indicate that the device or its drivers are not installed properly.

Which type of memory is permanently installed on your computer and attached to the motherboard?

The read-only memory (ROM) is a permanent data storage that holds information the computer needs that doesn’t change. For example, a type of ROM memory is your computer’s BIOS – basic input/output system. The BIOS is the first source of data accessed by your computer when it’s powered on.

What type of IP address is configured by a server when a device first initiates?

35 Cards in this Set The Telnet protocol encrypts transmitted data, which therefore cannot be read by others on the network. False How are IP addresses available to the Internet classified? public Which type of IP address is configured by a server when a device first initiates a connection to the network? dynamic.

What can you install to control multiple servers with a single mouse?

KVM stands for Keyboard, Video and Mouse. A KVM switch can be connected to more than one computer at a time and enables an individual to view, move, open and/or edit files from any connected machine.

What do you need to keep in mind about the system BIOS when selecting a hard drive?

When selecting a hard drive, keep in mind that to get the best performance from the system, the system BIOS and the hard drive must support the same standard. If they don’t support the same standard, they revert to the slower standard that both can use, or the drive will not work at all.

What is USB 3.2 vs USB-C?

USB Type-C is NOT the same thing as USB 3.2. USB Type-C ONLY describes the physical connector. USB 3.2 ONLY describes the actual capabilities of the port.

Is Type-C faster than Type A?

With the right data standard (see below), the USB-C connection is much faster and more versatile than USB-A. In time, you can expect USB-C connections to replace all older USB-A connections and other ports.

What is the highest version of USB?

USB 3.1 is the most recent version of the USB (Universal Serial Bus) standard for connecting computers and electronic devices. It is capable of data transfer speeds up to 10Gbps, and while it can use the USB-C connector type, it can also use a variety of other connector types.

What is Type B port?

USB Type-B Micro Used by modern Android devices as their standard charging plug and port.

What devices use a USB B?

USB Type B receptacles are often on larger computer devices like printers and scanners. Sometimes, you’ll find USB Type B ports on external storage devices like optical drives, floppy drives, and hard drive enclosures.

What is a USB SS?

The SuperSpeed (SS) USB 3.0 Cable is designed to connect a device with a USB Type A interface to one with a USB 3.0 Type B interface. It is ideal for connecting an audio interface, external hard drive, or other computer peripherals to a PC via a SS USB Port.

Which type of printer uses a physical mechanism that contacts a ribbon and presses it against a piece of paper?

Dot matrix printing uses a print head that moves back-and-forth, or in an up-and-down motion, on the page and prints by impact, striking an ink-soaked cloth ribbon against the paper, much like the print mechanism on a typewriter.

What two types of thermal printers exist?

There are two distinct categories of thermal printers: Direct thermal printers and thermal transfer printers.

What is the process called when Windows receives a print job from an application and places the job in a print queue?

Terms in this set (10) What is the process called when Windows receives a print job from an application and places the job in a print queue? Selected Answer: spooling. banking.

Which expansion slot is best for a video card in a desktop computer?

The best slot to use for video cards is the PCI-Express x16 slot. The next best is the AGP slot. The next best is a PCI-Express x1 slot but video cards which fit that slot are very hard to find as of late 2006. The worst choice for a video card is a PCI slot.

Does it matter which PCIe x16 slot I use?

Yes, the PCIe x16 slot you use DOES matter because on most motherboards, the second PCIe slot only offers either 8 or even just 4 PCIe lanes. The PCIe x16 slot is the fastest in any generation as it has the most PCIe lanes available and this results in a higher data throughput (speed in layman’s terms).

What slot does your video card use?

Typically they will all be PCI Express, but for a graphics card you need a PCI Express x16 slot. There are three versions of this slot, but they’re backwards compatible, so a modern PCI Express 3.0 graphics card will work in a motherboard with a PCI Express x16 2.0 slot. This motherboard has two PCI Express x16 slots.

When using an HDMI to DVI adapter What two DVI port types will the adapter work with?

The Best DVI to HDMI Cables and Adapters. DVI or Digital Visual Interface works with digital-only (DVI-D) or digital and analog (DVI-I) signals. On the other hand, HDMI or High-Definition Media Interface can only work with digital signals. One advantage of HDMI over DVI is that it can also transmit digital audio.

What term refers to horizontally torn images on a screen which occur when the video feed from the video controller gets out of sync with the refresh?

What term refers to horizontally torn images on a screen, which occur when the video feed from the video controller gets out of sync with the refresh rate of the monitor? artifacts.

What are two screen resolutions that might be used by VGA mode?

This is especially true with laptops or LCD monitors. VGA simply is 640×480 pixels, SVGA=800×600, XGA=1024×768.

Which of the following devices is a storage device?

Examples of storage devices are – Pen drives, Hard disk, Compact disk, etc.

What does notification within Device Manager indicate?

On Windows 10, sometimes, Device Manager will show a device with a yellow exclamation mark. When this happens, it indicates that the system has encountered a problem with that particular piece of hardware. Usually, it comes down to a hardware conflict of some sort, or missing or not correctly installed the driver.

When a device is having a problem and or might not be installed properly which icon is displayed for it in the Device Manager?

When a device is having a problem and/or might not be installed properly, which icon is displayed for it in the Device Manager? A red “X”.

What does in Device Manager indicate?

Device Manager allows users to view and control the hardware attached to the computer. When a piece of hardware is not working, the offending hardware is highlighted for the user to deal with. Device Manager is similar to a master list of hardware that Windows understands.

Which is best DVI or HDMI?

In its most recent versions, HDMI has caught up to DVI as both can now output 144hz at 1080p. In fact, HDMI is now considered the better option, as the cable simply supports more advanced technology than its dated counterpart.

Is a DisplayPort better than HDMI?

Although you’ll find more devices that support HDMI than DisplayPort, in this context the answer to the question, ‘is DisplayPort better than HDMI,’ is an emphatic, yes. In comparison, DisplayPort 1.4 has a maximum bandwidth of 32.4Gbps, which opens up much greater resolution and frame rate potential.

What type of signal does both HDMI and DVI use for video transmission?

While DVI connectors can only transmit video, HDMI connectors transmit both audio and video. In terms of picture quality, DVI and HDMI use the same encoding scheme for digital video signals and offer the same image quality.

What is the most common cause of a monitor showing horizontally torn images?

What is the most common cause of a monitor showing horizontally torn images on the screen? Video cable not properly seated.

QA

When Installing A New Device, Which Statement Is Accurate

What icon might you see in Device Manager that indicates a problem with the device?

Problem hardware appears in Device Manager with a small warning icon. A down-pointing arrow symbolises that a device has been disabled. If there’s a yellow exclamation mark next to a device or it is listed as ‘Unknown Device’, this usually means that the device driver hasn’t installed correctly.

What is the official standard for USB interfaces?

The official standard for USB interfaces is called IEEE 1394.

Which type of video port provides a digital only signal?

There are currently two prominent types of DVI connectors, DVI-I (Figure 1) and DVI-D (Figure 2). DVI-D provides a digital only signal, while DVI-I can support digital and analog signals.

When using an HDMI to DVI adapter What two DVI port types will the adapter work with?

The Best DVI to HDMI Cables and Adapters. DVI or Digital Visual Interface works with digital-only (DVI-D) or digital and analog (DVI-I) signals. On the other hand, HDMI or High-Definition Media Interface can only work with digital signals. One advantage of HDMI over DVI is that it can also transmit digital audio.

What does in Device Manager indicate?

Symptom. The Device Manager is a Control Panel applet in Microsoft Windows operating systems. Device Manager allows users to view and control the hardware attached to the computer. When a piece of hardware is not working, the offending hardware is highlighted for the user to deal with.

What does question mark in Device Manager mean?

In Device Manager, if you see a yellow question mark next to the device name, the driver mostly is missing. Device with missing driver won’t work at all. To fix this driver issue, you need to install a driver for this device.

What are the 4 pins in USB?

USB Connector Pinouts Pin Name Cable color 1 VCC Red 2 D- White 3 D+ Green 4 GND Black.

What are USB 3 ports?

USB 3.0 (aka USB 3) is a specific generation of USB ports. The main difference between USB versions is their transfer rate (speed) and how many connector pins they have. USB 3.0 ports have 9 pins and have a transfer rate of 5 Gbit/s, but 3.1 versions have 10 Gbit/s.

What is C type USB?

USB-C is an industry-standard connector for transmitting both data and power on a single cable. The USB-C connector was developed by the USB Implementers Forum (USB-IF), the group of companies that has developed, certified, and shepherded the USB standard over the years.

Which type of video port supports both analog and digital signals?

Mini DisplayPort is a miniaturized version of the DisplayPort interface. The Mini DisplayPort connector is primarily used on Apple® computers. This connector type carries both digital and analog computer video signals. The Mini DisplayPort connector can be adapted to support a VGA, DVI, or HDMI interface.

What communicates between the OS and computer devices?

A driver communicates with the device through the computer bus or communications subsystem to which the hardware connects. When a calling program invokes a routine in the driver, the driver issues commands to the device.

What technology is meant to protect digital content and prevent piracy?

Companies are already using blockchain to prevent piracy through content surveillance and digital watermarking.

Which DVI signal type is the most similar to HDMI?

While DVI connectors can only transmit video, HDMI connectors transmit both audio and video.Comparison chart. DVI HDMI Signal through cables There are three types of cables:- DVI-A: Analog only DVI-D: Digital only DVI-I: Digital and Analog. Digital.

Are there 2 types of DVI?

There are currently two prominent types of DVI connectors, DVI-I (Figure 1) and DVI-D (Figure 2). DVI-D provides a digital only signal, while DVI-I can support digital and analog signals.

Whats better HDMI or DisplayPort?

When is DisplayPort the best option? DisplayPort cables can achieve a higher bandwidth than HDMI cables. If there’s a higher bandwidth, the cable transmits more signals at the same time. This mainly has an advantage if you want to connect multiple monitors to your computer.

How do I find errors in Device Manager?

How to find your error code in Device Manager In Device Manager, double-click the device type that has the problem. Right-click the device that has the problem, and then click Properties. This opens the device’s Properties dialog box. You can see the error code in the Device status area of this dialog box.

What are the 5 functions of Device Manager?

Device Manager Functions open and close device drivers. communicate with device drivers. control and monitor device drivers. write and install device drivers.

How do you get useful information from Device Manager?

Check under Devices and Printers in Windows 10 and 8, and under System in Windows 7, you’ll find Device Manager. Once Device Manager is open, you can view device status, update device drivers, enable or disable devices or do hardware management.

What does the yellow triangle mean in Device Manager?

A yellow triangle next to a device in Device Manager means that Windows has identified a problem of some kind with that device.

What is a code 43 on Windows?

Windows 10. This error occurs when your graphics device driver has notified Windows that the device isn’t working properly. This may mean that the device has a hardware problem, or that the driver or driver software is failing.

What is Code 10 in Device Manager?

Usually, a Code 10 error is a temporary error, generated when Device Manager can’t start the hardware device. However this error is considered a generic message indicating an unspecified problem. This most commonly occurs after running a Windows* Update that includes Wi-Fi or Bluetooth updates.

Where is the positive and negative on a USB?

USB Cable Colors and What They Mean The red wire is a positive power wire with 5 volts of DC power. The black wire is the ground wire (similar to most all electronic devices). The white wire is a “positive” data wire. The green wire is a “negative” data wire.

Which USB pin is 5V?

Standard A and B USB connectors Pin Name Function 1 Vcc +5V supply voltage 2 D- Data- signal line 3 D+ Data+ signal line 4 GND Supply ground.

What is D+ and D in USB?

D+ and D- are the differential pair lines for USB. They should be connected to D+ and D-, respectively, of the host circuit. VCC needs to be connected to a 5V supply (which could come from the host circuit, if available).