Table of Contents
Wedging prepares the clay for optimal use. Wedging makes the clay more pliable, ensures a uniform consistency, and removes air pockets as well as small hard spots in the clay before you use or reuse the clay for a project.
What happens if I don’t wedge my clay?
There are usually no air bubbles in it! In fact, improper wedging will more often add bubbles and you’ll just dry out your clay in the process. Simply make sure the pieces get enough drying time and have no plaster mixed in with the clay- that IS a sure recipe for explosions.
What does wedging clay eliminate?
Wedging, the process of kneading the clay to make it more homogenous, is also used to remove air bubbles from clay. This process is similar to kneading dough. Cut the clay in half using clay cutting wire and check for air bubbles. If you see air bubbles trapped, repeat the wedging.
Does all clay have to be wedged?
NOTE: Keep in mind you will only need to wedge thoroughly for recycled clay or mixing mason satins or other colorants into your clay. Fresh Clay right out of the bag only needs to be wedged 30 to 40 times and the stack and slam about 10 to 15 slices.
What is wedging in clay preparation?
Wedging clay definition: the process of kneading the clay with the hands to remove air bubbles and ensure a homogenous mass. A fun exercise to see how long it takes to crate a truly homogenous mass of clay is to wedge together two chunks of different colored clays.
Do air bubbles cause clay to explode?
A thin piece of clay with an air bubble will dry and fire without issue. When the kiln temperature rises, the air pockets fill with water vapor, which builds pressure as water turns to steam. The pressure of the steam causes the clay to explode from the inside.
What is the difference between wedging and kneading clay?
Wedging is a specific type of kneading. The goal with wedging is to mix the clay without adding air bubbles. If you do it correctly, you’ll remove air bubbles. I was taught two types of wedging- knead (or ram’s head) and spiral.
Why am I getting bubbles in my clay?
Those bubbles are caused by trapped air in your polymer clay. When you fold over your strip of clay and insert it in your pasta machine fold last, a little pocket of air gets trapped in the fold. If you keep doing this over and over, more and more air gets forced into the layers of clay.
What are the 4 reasons for wedging clay?
Wedging prepares the clay for optimal use. Wedging makes the clay more pliable, ensures a uniform consistency, and removes air pockets as well as small hard spots in the clay before you use or reuse the clay for a project. When reclaiming clay, wedging ensures all the clay is incorporates together.
What surface is best to work with clay on?
Some artists prefer glass or tile as a work surface because they can help keep clay cooler if the artists has rather hot hands. They can also go directly into the oven with your project. In fact, at lots of retreats, small tiles are used as baking surfaces, because several can be placed in the oven at one time.
What are the six stages of clay?
There are 6 essential stages of clay: 1. ) Slip. Slip is clay with added water to make it into a paste or liquid. 2.) Wet clay. Wet clay is used by many potters to produce their work. 3.) Leather-hard clay. 4.) Dry clay. 5.) Bisque. 6.) Glaze ware.
How is clay prepared for use?
Clay preparation consists of mixing materials, removal of large stones (say over 5mm), roots, crushing of large particles, etc. There are 4 main methods of preparation – the plastic method; the wet method; the dry method and the semi-dry method.
What are the 5 stages of clay?
Terms in this set (5) slip. a mixture of clay and water, the consistency of pudding. wet/plastic clay. new clay from the bag, very workable. leather hard. the clay has lost most moisture, but you can still carve into it. bone dry or greenware. totally dry clay, all moisture is gone, ready to fire. bisque.
What are the 4 main ways or techniques to form clay?
Forming Clay Hand-building. Handbuilding is exactly what it sounds like; using your hands to form an object out of clay. Slab Building. Coiling. Throwing. Extruding. Slip Casting.
Can kilns explode?
But why do pieces explode in the kiln? The pressure from the steam, and nowhere for it to escape, causes the piece to explode. If there’s too much moisture in your greenware, especially moisture inside hollow air pockets within the clay, you run the risk of having your greenware explode.
How does clay explode?
What Causes Solid Clay To Explode When Heated Up. The primary cause is moisture which in turn puts pressure on the clay piece. Because the clay shrinks when it dries it puts pressure on the pottery. Another big problem is when you don’t wedge your clay the correct way thus leaving air pockets in your piece.
Will my clay explode in the oven?
Make sure the piece of clay is not solid, and, if it is hollow, make sure that it has an entrance for air to pass through or it might explode in the oven. If your clay is not completely dry it will not cook correctly in the oven, so make sure that your piece of clay is correctly dry at room temperature first.
What happens if you add too much water to clay?
If you add too much water, fold the edges of the bag down and let it sit open in the sun so some of the moisture can evaporate. You can also do this if the contents are just too wet to begin with. Once you’ve got your clay well mixed, tie off the bag and let it sit for about 24 hours.
How do you wedge a large amount of clay?
If you’re throwing large pots, try using softer clay and throw it dry (or with less water) to avoid degenerating it to mush. Wedge using the weight and strength of your whole body on a wedging table of the proper height. Ideally, the table height should be equal to the distance between fingertips and floor (figure 1).
