Table of Contents
bonding is a undercoat plaster for low suction background like concrete. hardwall has high impact resistance and is quicker drying.
Whats better Hardwall or bonding?
Bonding can be applied to really dense concrete blocks or engineering bricks and even concrete itself. These surfaces are where you would use bonding plaster as a scratch coat. Hardwall Plaster: Hardwall is similar to Browning except that it offers a higher impact resistance and quicker drying surface.
Can I use Hardwall instead of bonding?
Hardwall is for block and brick, i also use it for filling in chases. If you want to use hardwall for low suction backgrounds such as a artex ceiling i would use a bonding agent such as bond-it or wicks plaster bonding agent rather that pva, That is what i do anyway.
Can you tile on Hardwall?
If you are part tiling a wall of hardwall, you are obviously better to skim it all. If you want a surface to tile, sand and cement is the one, but any sound skimmed surface will do you. You can tile onto hardwall and it will last, and you can get hardwall closed in good enough with fat to help the tiler.
Can you Hardwall onto brick?
On an external wall that is single brick you must use sand and cement. out of line etc Straight walls, pre-mix plaster, hardwall etc or sand and cement(lime aswell). Use multi finish for top coat.
How long before you can skim over bonding?
Bonding about 2-3 hours, but some do leave it to following day before skimming depends on size of area. The 3-4 days is a guide, the colour of the plaster will tell you when it’s dry enough to paint. Need to leave decent time between paint coats, for each to throughly dry before applying the next one.
Can I use bonding plaster to fill holes?
Bonding coat can fill large holes/chunks. It’s all in the mix – your looking for a whipped cream consistency. I find it makes it very easy to apply. Slap it on and leave it rough, don’t try to finish it when it’s just been applied.
Can you plaster straight onto Hardwall?
You can plaster directly over hardwall the day after. As Wine~o said, pva either day before or prior to skimming. Try not to over saturate the hardwall as it will blister. Blue Grit will give a much longer workable time.
What is the best plaster?
Gypsum plaster can achieve a fine finish and is often used as a topcoat in plastering projects. It’s less prone to cracking, making it a great choice for your walls’ longevity. This is a versatile plaster that can be used to create a great first coat, called undercoat, for your project.
How long does bonding take to dry?
Bonding about 2-3 hours, but some do leave it to following day before skimming depends on size of area. The 3-4 days is a guide, the colour of the plaster will tell you when it’s dry enough to paint. Need to leave decent time between paint coats, for each to throughly dry before applying the next one.
Do I need to PVA before bonding coat?
If, however, the bonding cost is pretty smooth and hasn’t got a good ‘key’ for a finishing coat to adhere to then there’s no harm in putting PVA on. You won’t need to re-moisten it before the finishing coat as long as it’s tacky, if it’s not then put another coat of 50/50 PVA/water on.
Should you PVA before dot and dab?
I would dilute pva with water, about 4-1 and roller it on as its quicker, when dry it will be hard and wont be sandy at all. Ideal for dot and dab.
What is Hardwall construction?
Hardwall. Hardwall plaster is another type of plaster used in construction industry designed to be placed as the first coat or backing plaster. The name derives from its specific trait to dry into the hard finish, which is a perfect coating for surfaces that need to withstand high mechanical pressure and resistance.
What is Hardwall used for?
Thistle Hardwall is a gypsum undercoat plaster for use on most masonry. With a final coat of Thistle Multi-Finish, it provides a smooth, inert, high quality surface to internal walls.
Why is my bonding plaster cracking?
1-Reasons of plaster cracking or De-bonding Evaporation if the wall is not protected from sun and wind which can cause map cracking or dry shrinkage cracks. Suction into the walls if the blocks are absorbent and they have not been dampened which might cause drying shrinkage cracks. Bad or badly applied rush coat.
How thick should bonding plaster be?
How thick should a bonding coat be? Floating coats should be applied at a thickness of 8mm, up to a total plaster thickness of 25mm, and wire- scratched between each coat. The final floating coat should be ruled to an even surface and lightly scratched to form a key for Thistle Multi-Finish.
Does Hardwall go off?
Kitchy said: Mate hardwall goes off quick in the best of times is it really worth it in using 2 bags!Mar 3, 2016
How much does a bag of Hardwall coverage?
Thistle HardWall
| Order Code | Nominal bag weight (kg) | Approx coverage (m²) |
|---|---|---|
| 06110/3 | 25 | 3.0 |
Which plaster is best for walls?
Cement plaster is the best bet when it comes to plastering exterior walls because it is moisture-resistant and will protect the wall against climate changes as well as environmental pollution. Moreover the durability factor in cement plaster makes it the ideal choice for internal plastering too.
