Table of Contents
Say your engine needs 30-weight oil when it is running at operating temperature. Well, 30-weight oil will work perfectly well when your engine is warmed up. But when you go to start it on a cold winter morning, that 30-weight oil is considerably thicker and has a hard time moving when you turn the key.
Which is better 10w30 or 10W40?
The higher the number, the more viscous or thicker, the oil is at higher temperatures. 10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures.
Is it better to use 5w30 or 10w30?
5w30 provides better lubrication compared to 10w30. It is best suited for private vehicles and light-duty diesel and petrol engines, while 10w30 is more suitable for commercial vehicles and other cars with heavy load engines.
Is 5w30 or 10w30 better for winter?
10w30, the thinner 5w30 will circulate quicker, and flow through bearing tolerances better during an engine startup in the winter or colder climates. The “w” behind the five and the 10 indicates that those are the viscosities in colder or winter temperatures.
Should I use thicker oil in an older engine?
Older engines use more oil, but it gives them a better fuel economy. Older engines with more than 75,000 miles on them require a thicker oil that will lubricate their critical engine parts and prevent oil leaks, sludge, and deposits from forming.
What happens if I put 10W40 instead of 5W30?
If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.
Is it OK to use 10W40 instead of 10W30?
Similarly, SAE 10W-40 motor oil performs well in cold weather conditions. It has the same low-temperature limits as the 10W-30 but is better in higher temperatures. Either 10W30 or 10W40 for summer use is fine; however, 10W-40 motor oil will better protect your engine.
Is it OK to use 5W30 instead of 10w30?
Can you use 5W-30 instead of 10W-30? Absolutely yes for car engines, 5W-30 is usually synthetic and superior to 10W-30. Both have the same viscosity at the operating temperature of an average car engine. 5W has lower viscosity when cool and is considered better for the car engine during engine start.
Is it OK to switch from 5W30 to 10w30?
The oils only differ in cold weather viscosity. If you never see temperatures below zero F then either 5W30 or 10W30 is fine. If winter temperatures are regularly below 0 degrees F then 5W30 is what you should run and you can run it year round if the 30 weight is good according to your owner’s manual.
Can I use SAE 30 instead of 10w30?
No, SAE 30 is a single viscosity oil. 10w30 is multiple viscousity. Recommended engine oil viscosity changes with temperature because natural oils change viscosity with temperature. A SAE 30 oil will thin out at higher temperatures.
Can you put 10w40 in a 5w30 engine?
Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.
Can I use 5W 20 instead of 5w30?
5W-20 oil, being the lower viscosity oil (thinner oil) than 5W-30, might help boost your fuel economy. And although you may not notice a vast difference, it does add up over time. However, remember that you should always use the motor oil recommended for your car by your engine manufacturer or mechanic.
Can I use 5w40 instead of 5w30?
There’s not going to be much functional difference between a 5w-30 and 5w-40 as there’s a lot of functional overlap in the recommendations. The lower weight might yield better efficiency under light load operating conditions, but higher weight might yield better protection under higher load operating conditions.
When should I use 20W50 oil?
What Is 20W-50 Oil Used For? 20W-50 is a common motor oil used in moderate-to-large diesel and gasoline engines, high-performance motorcycle bikes, and aviation vehicles. Its resistance to thinning at high heat also makes it popular as a racing oil and high temperature driving.
What if I use 0w 20 instead of 5w30?
There are now multigrade motor oils available for all types of motor oil. However, 0w20 and 5w30 are among the best in their class. The performance of your vehicle will not be affected if you add 5w30 instead of 0w20. You will continue to enjoy comfortable rides in your vehicle as long as it runs smoothly.
Can you mix 5w30 and 10W30?
No- you wont get the desired output by mixing these two oils. Because , both have different grades, 5w30 is more light and the density is less , and is intended for light usage (scooters). Whereas a 10w30 is a higer grade with more density and suitable for more higher capacity engines.
Is 10W40 good for high mileage?
Mobil 1 High Mileage 10W-40 motor oil is recommended by ExxonMobil for use in high mileage vehicles (even those that have used lower quality conventional oils†), including: Cars.
Is 5w30 good for high mileage?
5W-30 motor oil is the top viscosity recommendation by automakers over the past four decades for use in many vehicle types. Furthermore, high-mileage 5W-30 motor oil is specially formulated for late model vehicles or newer vehicles with over 75,000 miles/120,000 kilometers.
Which is better 10W30 or 5w40?
If your car’s recommendations say to use 10w-30 that means you should not use 5w-40 because it acts in a different way whether at cold or at operating temperature. The first numbers 10W and 5W are referring to viscosity at cold so that the lower the number is the thinner the oil is at cold and vice versa.
