Table of Contents
Say your engine needs 30-weight oil when it is running at operating temperature. Well, 30-weight oil will work perfectly well when your engine is warmed up. But when you go to start it on a cold winter morning, that 30-weight oil is considerably thicker and has a hard time moving when you turn the key.
Is it better to use 5W30 or 10W30?
5w30 provides better lubrication compared to 10w30. It is best suited for private vehicles and light-duty diesel and petrol engines, while 10w30 is more suitable for commercial vehicles and other cars with heavy load engines.
Should I use 5w20 or 10W30?
5w20 is an ideal choice because it works better in cold weather and is easier to move during cold starts. However, in areas with high temperatures throughout the year, 10w30 oil is used because it allows the oil to flow faster and lubricate the components more effectively, thereby reducing engine wear.
How do you know what weight oil to use?
For example, a 5W- motor oil will flow better at lower temperatures than a 15W- motor oil. The higher number, following the “w” refers to hot weather viscosity, or how fluid your oil is at hot temperatures. The higher the number, the thicker the oil at a specified temperature.
Is 5W or 10W better for summer?
Answer: There is absolutely no need to switch to 10W-30 motor oil in the summer if 5W-30 is an acceptable grade for your engine. Remember also that a 10W-30 and 5W-30 are essentially the same viscosity at operating temperature, so there is no tangible advantage switching over to 10W-30 for summer driving.
Is it OK to use 5W30 instead of 10W30?
Can you use 5W-30 instead of 10W-30? Absolutely yes for car engines, 5W-30 is usually synthetic and superior to 10W-30. Both have the same viscosity at the operating temperature of an average car engine. 5W has lower viscosity when cool and is considered better for the car engine during engine start.
What happens if you use 10W40 instead of 5W30?
If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.
Is it OK to run 10w30 instead of 5w20?
Originally Answered: Can I put 10w30 instead of 5w20? You can, but you will get worse mileage, and in most cases shorten the life of your engine, as it will take longer to pump up pressure for your bearings and lifters, and won’t spray your lower cylinders for an extra second or so on each cold start.
Is it OK to use 5w30 instead of 5w20?
Can You Use 5w30 Instead Of 5w20. It is not recommended. Although they both have the same winter rating of 5, the thickness (viscosity) of 5w30 is a bit higher than 5w20. That means your engine’s at stake for using the high viscosity oil.
What happens if you put 10W-30 instead of 5W-20?
The 5 and 10 digits signify the viscosity of the oil at lower temperatures. So, this means that when you are asking can you use 10w30 instead of 5w20, the thinner 5w20 will circulate faster, and move better across bearing tolerance during ignition in the winter or cooler climates.
What is 30 weight oil used for?
Use. SAE 30 oil is typically used for smaller air-cooled engines, like the ones in small tractors, lawnmowers, and chain saws. Most motor oils today are multi-grade oils that will perform well in all seasons.
Which oil is thicker 10W40 or 20W50?
This refers to its fluidity or thickness. The “20W” indicates how quickly the engine will start when cold or in cold weather. 20W50 motor oil is relatively viscous and thick. Most modern oils are 10W40 or even 5W40.
Can I use 5W40 instead of 5W30?
There’s not going to be much functional difference between a 5w-30 and 5w-40 as there’s a lot of functional overlap in the recommendations. The lower weight might yield better efficiency under light load operating conditions, but higher weight might yield better protection under higher load operating conditions.
What happens if you put 10W oil in 5W?
What will happen if I mix 10w oil with 5w oil? – Quora. It will thin it down, as long as your using the same brand, the chemical make up of the oils should be the same.
When should I switch from 5W30 to 10W30?
The oils only differ in cold weather viscosity. If you never see temperatures below zero F then either 5W30 or 10W30 is fine. If winter temperatures are regularly below 0 degrees F then 5W30 is what you should run and you can run it year round if the 30 weight is good according to your owner’s manual.
Which oil is thicker 5W or 10W?
A 10W or 5W is the index for how easily the oil flows in winter (hence the W). A 10W oil thickens more than a 5W. The other number indicates the oil’s resistance to thinning at high temperatures.
Can I mix 10w30 with 5w30?
No- you wont get the desired output by mixing these two oils. Because , both have different grades, 5w30 is more light and the density is less , and is intended for light usage (scooters). Whereas a 10w30 is a higer grade with more density and suitable for more higher capacity engines.
Can you use 30w instead of 10w30?
Can I mix SAE 30 with 10W30? Yes, you can mix SAE 30 with multi grades oils like 10w30, 10w40.
Can I use 10W40 instead of 10w30?
10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures.
