Table of Contents
Traditionally, exterior grade plywood has been the subfloor material of choice for many bathroom flooring projects. Plywood is made by gluing alternating layers of wood veneer. CDX plywood (¾”) in particular is used often because it has a high level of resistance to moisture and humidity.
What should be used for a bathroom subfloor?
Plywood is the most common material used for subflooring in bathrooms. A versatile, man-made material, plywood is used in floors, walls and furniture.
How thick should a bathroom subfloor be?
The installation guide for 1/4 inch HardieBacker recommends having wood subfloors made of 5/8 inch exterior grade plywood or OSB (oriented strand board) that is 23/32 inches thick.
What kind of floor should you put in a bathroom?
The most popular choice for bathrooms is tile. Specifically, ceramic and porcelain tiles are great options for bathrooms. Tile flooring is resilient, waterproof, available in a variety of colors and designs, and generally less expensive than other hard surface options.
What is the best underlayment for a bathroom floor?
Backer Board. This is the industry standard most preferred by construction pros when installing ceramic or porcelain tile. Trowel-able and Pourable Underlayment. A number of trowel-able and pourable tile underlayment options are available, each with its own purpose and best use. Membranes.
Is it better to use OSB or plywood for subfloor?
The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.
What plywood should I use for subfloor?
The recommended thickness of the plywood subfloor is governed by the spacing of the joists. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.
Does subfloor go under bathtub?
Flooring repairs can be intimidating, but the subfloor under the tub generally consists of plywood secured over floor joists and is fairly simple to replace — once you get access to it. The entire tub unit requires removal before subfloor replacement can begin.
How do you waterproof a bathroom subfloor?
Caulk any seams where two pieces of plywood are butted together. Dab caulk onto nail or screw heads to seal the potential leak point they provide. Caulk any splits in the wood or any other areas that may provide a point for water to seep under the subfloor.
What size subfloor do I need?
The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.
What is the best flooring for wet rooms?
The best materials for wet room floor covering Vinyl flooring is ideal because of its anti-slip features, offering us a safer surface over other tile types. Mosaic tiles are probably the first option that comes into our mind when we are thinking of the right wet room floor covering.
What is the easiest bathroom floor to install?
What’s the easiest flooring to install in a bathroom? Vinyl sheet makes the easiest flooring type to install. Consider luxury vinyl plank for an easy install with a luxury look. Vinyl can last 15 years or more when installed and cared for properly.
Do I need to waterproof my bathroom floor?
Bathrooms are the main wet area in the house. Therefore, you need to waterproof the area so that water does not get into the substructure of the house and cause major structural damage. It involves setting up a waterproof barrier around the floor and walls of the bathroom, including the shower.
What is the difference between subfloor and underlayment?
The subfloor is the bottom most structure of the floor. It provides a flat and stable surface and supports the actual floor. Underlayment is different from the subfloor in that it rests between the subfloor and the actual floor.
What do you put between subfloor and underlayment?
Use building paper! Yep, put down an underlayment of 15-pound felt building paper between a wood subfloor and your hardwood planks, and you can reduce the chance of squeaky floors and control moisture.
What goes on top of a subfloor?
Underlayment: Some types of flooring can be installed directly on top of the subfloor, such as vinyl flooring. Other types need a middle layer, called underlayment, such as laminate,carpet and tile.
Can you waterproof OSB?
OSB is strong and water-resistant. Every single fiber or piece of wood in an OSB is saturated with a cocktail of resins designed to provide superior strength and waterproofing to the finished product. This type of board is an excellent material for use in waterproofing systems, be they roof, sub-floor or wall.
Do you nail or screw subfloor?
Ideally, nail down your subfloor using corrosion-resistant nails that will securely hold it in place and last a long time. Screws are a great alternative that you can easily remove, but they are not as sturdy. Screws are superior in terms of reducing floor squeaks, but the installation is slower.
Is pine plywood good for subfloor?
Yes, you can use pine subfloors as primary flooring. In many older houses, the pine subfloor was the only floor and it held up well. Uncovered pine subflooring appeals to recycling enthusiasts as well as fans of distressed wood.
Which is better OSB or plywood?
Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists. However, nail-holding ability controls performance in shear wall applications.
Is OSB cheaper than plywood?
OSB is less expensive than plywood. To build a typical 2,400-square foot home, OSB may cost $700 less than plywood. OSB is considered by many to be a “green” building material because it can be made from smaller-diameter trees, such as poplars, that are often farmed.
Does subfloor need to be tongue and groove?
For subflooring, you use tongue and groove plywood. The tongue and groove are only along the 8 foot edges. On the four foot edges, your seams will fall on joist tops, so no need for tongue and groove.
