Table of Contents
Plywood Subflooring Plywood has been a standard subfloor material since the 1950s and remains the preferred subflooring for many builders. Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring.
What is the best plywood for flooring?
Interior plywood is ideal for rooms not exposed to moisture, such as bedrooms, and makes a good subfloor for carpeting, tiles, vinyl, engineered wood laminate flooring and hardwood flooring. Exterior plywood is a better choice for bathrooms, kitchens and any other rooms exposed to water and moisture.
What is the standard plywood for flooring?
The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.
Is it better to use OSB or plywood for subfloor?
The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.
Is 12mm plywood OK for flooring?
The cross-graining technique used in our 12mm ply improves strength, stability and prevents warping, making it excellent for bath panelling, wall lining floors and roofs.
Can I use plywood for flooring?
Plywood floors are suitable for any room where you’d otherwise install hardwood, though kitchens and bathrooms are less desirable since frequent water spills are likely. A 1½-in thick, 4-foot by 8-foot sheet of CDX plywood (the kind used in subflooring) sells for around $15.
What type of wood is used for flooring?
The best hardwood floors are made with wood species that are readily available and — you guessed it — very hard. Oak flooring, maple flooring and cherry flooring are all good choices. Other species include bamboo (which is actually a grass), walnut, ash and mahogany.
Is marine plywood good for flooring?
But marine plywood is the highest grade of plywood used for long-term use. Marine plywood performs quite well in both dry and wet places. Also, the chances of termites and fungus inside it are very less. It is durable for a long time under any weather condition.
What thickness OSB should be used for flooring?
Wood Products For decades, 23/32″-thick OSB has been the most commonly used thickness of OSB subflooring. But a simple switch to 7/8″ panels offers several advantages for accommodating a home’s energy efficiency and for ensuring the performance of finish materials and the overall feel of the floor.
Can sheathing plywood be used for subfloor?
Like Sturd-I-Floor, Rated Sheathing may be plywood or OSB. When used as a subfloor, Rated Sheathing typically requires installation of an additional layer of underlayment on top of it before finish flooring can be applied. The underlayment requirements vary depending on the finish flooring.
What is best material for subfloor?
Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.
Do you nail or screw subfloor?
Ideally, nail down your subfloor using corrosion-resistant nails that will securely hold it in place and last a long time. Screws are a great alternative that you can easily remove, but they are not as sturdy. Screws are superior in terms of reducing floor squeaks, but the installation is slower.
How do you waterproof plywood flooring?
To waterproof the plywood yourself, first repair it if needed and then sand it down and clean it off. Use a waterproof sealant, stain or paint and apply two to three layers. Allow each coat to dry thoroughly before painting the next one.
What is RTD plywood used for?
Exterior panels sometimes referred to as RTD sheathing, are designed to hold up to constant moisture. They are completely waterproof and are great for installing in places where you expect consistent exposure to moisture. This RTD sheathing is great for roofs and other outdoor applications.
How do you make plywood floors look good?
Step 1: Apply the Base Coat. Brush or roll a coat of floor-grade primer to seal the grain and prevent bleed-through, wait for it to dry, then apply a coat of floor enamel. Step 2: Draw Planks. Step 3: Gouge the Lines and Stain the Floor. Step 4: Make a Glaze. Step 5: Paint the Grain. Step 6: Apply Clear Finish.
Is 18mm plywood good for flooring?
Plywood is the desired material for use in domestic flooring, but this particular board is extremely multi purpose. These boards can be used in a number of ways, including site hoarding, rood decking and even vehicle body work.
Can you use 9mm ply for flooring?
jasonb New Member. With a 300mm joist spacing and readymix you should be OK to keep the 9mm ply.
Can I tile on 9mm plywood?
Suitable for fixing ceramic wall tiles and mosaics and dark natural stone. Suitable for use on concrete/brick/block walling, cement:sand rendering, plaster, plasterboard, plywood/chipboard, tile backer boards, glazed tiles/bricks, painted walls, glass reinforced polyester (GRP) backgrounds, steel and galvanised steel.
