Table of Contents
What kind of drywall do you use for basement walls?
If you’re drywalling your basement, you’ll need to use ½ inch thick gypsum panels on the walls and ⅝ inch thick sheets on the ceiling. If your basement is subject to moisture (most basements are), it’s wise to use water or mildew-resistant drywall.
Is there special drywall for basements?
Basement Board: This type of drywall, usually used in basements, has a standard core and mold-resistant face and back paper. It’s not as effective as standard mold and moisture-resistant drywall, but it’s less expensive.
Do I need mold-resistant drywall in basement?
Modern mold-resistant drywall combines the moisture resistance of older green board with materials and engineering that also make it quite resistant to mold. But in rooms that experience frequent humidity and are often subject to mold and mildew, such as bathrooms or basements, mold-resistant drywall is a good choice.
What is the best sheetrock for a basement?
Use PURPLE XP® Hi-Impact® Drywall, featuring a fiberglass mesh embedded into its core, to prevent accidental holes in high-activity areas. For low-activity spaces, PURPLE XP® Drywall protects against the moisture, mold, and mildew often found in basements.
Which is better drywall or sheetrock?
No, there is no difference between Sheetrock and drywall. Sheetrock would likely be the standard for what drywall should be. If you see in a tutorial that you should use Sheetrock, you can use any type of drywall available to you. Whether the drywall will be as high quality as Sheetrock is a different question.
Can you use 1/2 drywall basement ceiling?
Drywall Size – Basement Drywall Thickness The most commonly installed thickness, per my extensive Google searching, is 1/2 inch. This is what I had installed in my basement. TIP: If your ceiling joist are 24″ on center instead of 16″ then you need to use 3/8th’s for the ceiling instead of 1/2 inch.
Is lightweight drywall as good as regular drywall?
Although both standard drywall and lightweight drywall are good for any room in your house (except the bathroom) the lightweight option is more user-friendly. The advantage of using lightweight over standard drywall is that you will be more productive when carrying a product that is, on average, 13 pounds lighter.
What insulation should I use in basement walls?
There are several types of basement wall insulation, including sprayed foam, bubble foil, foam board and fiberglass. Sprayed foam insulation is a viable choice for a homeowner who is looking for a do-it-yourself option for a finished basement. The foam is applied in exactly the manner as it sounds — with spray cans.
What is the difference between green and purple drywall?
What’s the difference between PURPLE drywall and traditional green drywall? Traditional green drywall (also known as greenboard) is only moisture-resistant. PURPLE drywall, manufactured only by Gold Bond Building Products, is superior because it offers moisture, mold and mildew resistance.
Is water resistant drywall worth it?
Mold resistant drywall grows mold and mildew much slower than regular drywall, but it’s only worth the investment if you install it in rooms that are most prone to damp problems and if you put preventative efforts into keeping your interior dry and moisture-free.
What is purple drywall?
Our most versatile drywall product, PURPLE XP® Drywall is moisture-, mold- and mildew-resistant and ideal for almost every room in the home. Performance.
What is the difference between gypsum board and sheetrock?
 Gypsum is a natural mineral while drywall is a manufactured product. Gypsum is a mineral containing water while drywall consists of gypsum plaster, which contains no water, pressed between two thick paper panels. 3. Gypsum in its natural form is crystalline whereas drywall is not since the plaster is in paste form.
How do I finish my basement walls?
Seal the Wall. Use a paint roller to apply the masonry waterproofing product you choose. Install Blocking Between Joists. Snap Lines on the Floor. Assemble the Walls on the Ground. Tip Up the Walls. Plumb the Wall and Secure the Top Plate. Build Out Around Windows.
Where is purple drywall used?
Purple Drywall It can be used with all wall and ceiling applications and is ideally suited where enhanced moisture and mold resistance is desired. If it is going to be in contact with water, this is the one to use.
Can you use cement board for basement walls?
First of all, drywall should not be attached directly to basement walls. Instead, use cement board on the lower portion of the wall, about 10”-12” from the floor. Also, be sure to cover the lower part of the wall and floor with a moisture resistant product, like tile.
Which is cheaper drywall or sheetrock?
As with most name brand materials, sheetrock tends to be a bit more expensive than its non-name brand counterparts. However, many builders believe sheetrock provides a better quality product and is a bit easier to work with than generic brand drywall.
How much is a 4×8 sheet of sheetrock?
The average price for drywall and sheetrock is $15 per 4′ x 8′ panel, with a typical range of $12 to $20 per panel. This translates into a cost of $0.40 to $0.65 per square foot.
Is gyprock and drywall the same?
Gyprock is also known as gypsum board, drywall, or plasterboard. For thousands of years, plaster made from lime, sand, animal hair and other ingredients was used to create a smooth interior finish on building walls and ceilings. This new form of plaster grew in popularity because it could speed up the building process.
