Table of Contents
To meet legal safety standards in the U.S., a tire’s tread needs to be at least 2/32” deep. If the tires do not meet the 2/32” standard or are approaching not meeting it, you should replace your tires. Tires should also be free of sidewall damage and irregular wear for optimal performance and safety.
Should I change tires 4 32?
The Tire Rack’s advice is that if rain and wet roads are a concern, you should consider replacing your tires when they reach approximately 4/32″ of remaining tread depth. Since water can’t be compressed, you need enough tread depth to allow the rain to escape through the tire’s grooves.
Should I replace tires 5 32?
If your gauge measurement reads: 6/32″ or higher: Your tire’s tread depth is sufficient. 5/32″: If snow-covered roads are a concern, you should consider replacing your tires. 4/32″: If you frequently drive on wet roads, consider replacing your tires.
What is a good tread depth for used tires?
Used tires tread can be up to 90%, but the average is 6-8/32”. Tires in good condition should have a minimum of 6/32” to be useful, or 4/32” if the tire is 13-14”. The average legal minimum tread depth is 2/32”, but driving becomes unsafe with such a tread.
What is the best tread count for tires?
Good tire tread depth will be 6/32 or deeper. If the depth is 4/32, you should start thinking of replacing your tires and getting new ones. 2/32 or less means that you should change your tires ASAP. The amount of tire tread can affect your stopping distance, making a drive in wet or snowy conditions more dangerous.
At what 32nd should tires be replaced?
New tires typically come with 10/32” or 11/32” tread depths, and some truck, SUV and winter tires may have deeper tread depths than other models. The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth.
What is 8 32 tread left?
8/32″ of useable tread depth. A tire that starts with 10/32″ of original tread depth has 12.5% wear for every 1/32″ that is worn away, and a tire that starts with 12/32″ ” of original tread depth, has 10% wear for every 1/32″ that is worn away, etc.
What percentage is 5 32 on a tire?
This means you have 5/32 of 1 inch of tread remaining on your car tires. On most passenger car tires, this represents approximately 60% wear so you may want to start thinking about choosing a replacement set.
Is 5 32 A good tire tread?
Tread depth what to do 6/32” Your tire’s tread depth is sufficient for 3-seasons but nearing minimum for a winter tire. 5/32” If wet roads are a concern, consider replacing your tires. 4/32” – 3/32” Seriously consider replacing your tires as soon as possible. If it’s a winter tire, 4/32” is the minimum.
Is 9/32 A good tire tread depth?
New tires have an average tread depth of 8 to 9 millimeters (10/32 to 11/32 inches). As you drive, the tread will wear down. A tire with a tread depth below 1.6 millimeters (2/32 inches) lacks grip. Braking distance and vehicle control are impaired.
Is 50 percent tire tread good?
If the tread reaches the bear’s paws, your tires are probably pretty new. If it reaches all the way across the silver, they’re about 50% worn. If your tire tread reaches only about half-way into the letters, it’s time to shop for new tires.
Is 80 percent tire tread good?
Here’s what the heck that means: 2/32nds of tread is the legal minimum of tread you need on your tires to pass inspection in most states. Most tires have 10/32nds of tread when new, and when 80 percent of the tread has worn down, or its reached 2/32nds, it’s time for new tires.
What is the minimum safe tire tread depth?
The minimum legal limit is 2/32 of an inch. This doesn’t mean that tires are perfectly safe if they have 3/32 left of tread. This is simply the limit at which you won’t pass your state safety inspection. Your tires become incrementally less safe as the tread wears down.
What is the minimum tire tread depth in Ohio?
All tires shall have a minimum of one sixteenth of one inch depth of tread on the road surface. All tires shall be free of major bumps or bulges, breaks, thrown tread or any condition which would constitute an unsafe condition.
What is a good tire tread depth in mm?
While the minimum legal tread depth for all passenger car tires in the US is 2/32” (1.6 mm), it is safer to replace them at a depth of at least 4/32” (2 mm). For winter tires, it is recommended that you replace your tires when the tread depth is below 15/64” (4 mm).
Is 4 32nds of tread depth legal?
According to Federal Motor Carrier Safety Administration (FMCSA) regulations, the minimum tread depth for a steer tire is 4/32 of an inch on every major tread groove. If one spot on one groove is less than 4/32, then a driver will be issued a citation.
How much is 7 32 tread?
Tire Tread Depth Conversion /32″, Inch, MM Fraction /32″s Inch MM 7/32″ 0.219 5.56 8/32″ 0.250 6.35 9/32″ 0.281 7.14 10/32″ 0.313 7.94.
