Table of Contents
The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth. The idea of the penny test is to check whether you’ve hit the 2/32” threshold. Here’s how it works: Place a penny between the tread ribs on your tire.
Should I replace my tires at 3 32?
6/32″ or higher: Your tire’s tread depth is sufficient. 5/32″: If snow-covered roads are a concern, you should consider replacing your tires. 4/32″: If you frequently drive on wet roads, consider replacing your tires. 3/32″: It’s time to start shopping for new tires.
Should I change my tires at 4 32?
“Tire Rack’s advice is that if rain and wet roads are a concern, you should consider replacing your tires when they reach approximately 4/32″ of remaining tread depth.” Obviously the tread will wear away over the life of the tire and the volume of its tread grooves will be reduced.
How many mm tread before changing tires?
Fast facts: When to replace tires You must replace tires when the tread depth falls below 1.6 mm, which is the legal limit. Continental recommends changing summer tires at 3 mm and winter tires at 4 mm tread depth; after this point safety and performance characteristics are not optimal.
What is the minimum safe tread depth for tires?
The minimum legal limit is 2/32 of an inch. This doesn’t mean that tires are perfectly safe if they have 3/32 left of tread. This is simply the limit at which you won’t pass your state safety inspection. Your tires become incrementally less safe as the tread wears down.
Is 9/32 A good tire tread depth?
New tires have an average tread depth of 8 to 9 millimeters (10/32 to 11/32 inches). As you drive, the tread will wear down. A tire with a tread depth below 1.6 millimeters (2/32 inches) lacks grip. Braking distance and vehicle control are impaired.
What is a good tread depth for used tires?
Used tires tread can be up to 90%, but the average is 6-8/32”. Tires in good condition should have a minimum of 6/32” to be useful, or 4/32” if the tire is 13-14”. The average legal minimum tread depth is 2/32”, but driving becomes unsafe with such a tread.
What is 8 32 tread left?
8/32″ of useable tread depth. A tire that starts with 10/32″ of original tread depth has 12.5% wear for every 1/32″ that is worn away, and a tire that starts with 12/32″ ” of original tread depth, has 10% wear for every 1/32″ that is worn away, etc.
Is 5 32 A good tire tread depth?
Tread depth what to do 6/32” Your tire’s tread depth is sufficient for 3-seasons but nearing minimum for a winter tire. 5/32” If wet roads are a concern, consider replacing your tires. 4/32” – 3/32” Seriously consider replacing your tires as soon as possible. If it’s a winter tire, 4/32” is the minimum.
At what 32nd should tires be replaced?
New tires typically come with 10/32” or 11/32” tread depths, and some truck, SUV and winter tires may have deeper tread depths than other models. The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth.
Is 7mm winter tire tread good?
Depending on their type, new tires have a tread depth of between 7 mm and 9.5 mm. While the minimum legal tread depth for all passenger car tires in Europe is 1.6 mm, it is safer to replace them at a depth of 2 mm at least. Weather considerations mean that the wear limit is set at 4 mm for winter tires.
Is 4mm tread OK?
Any tyre that has a tread depth less than 1.6mm is illegal in the UK. A tyre with a tread depth of 4mm is a cause for concern as the tyre is 62% worn.
Is 5mm tread OK?
Insert the gauge into the tyre tread groove with the coloured scale touching the tyre. If the red is visible the tyre tread is below 1.6mm. This means the tyre is 100% worn and should be replaced urgently. If the green is visible, the tyre tread is above is 5mm and is safe to drive.
At what point are tires unsafe?
Tires are considered legally worn out in most states when the tread depth is less than 2/32″. Driving on tires with tread worn down this far is dangerous and could even get you a ticket.
Is 80 percent tire tread good?
Here’s what the heck that means: 2/32nds of tread is the legal minimum of tread you need on your tires to pass inspection in most states. Most tires have 10/32nds of tread when new, and when 80 percent of the tread has worn down, or its reached 2/32nds, it’s time for new tires.
What does 7 32 mean on a tire?
Tire Tread Depth Conversion /32″, Inch, MM Fraction /32″s Inch MM 7/32″ 0.219 5.56 8/32″ 0.250 6.35 9/32″ 0.281 7.14 10/32″ 0.313 7.94.
Is 50 tire tread good?
If the tread reaches the bear’s paws, your tires are probably pretty new. If it reaches all the way across the silver, they’re about 50% worn. If your tire tread reaches only about half-way into the letters, it’s time to shop for new tires.
