Table of Contents
Here are five steps that you should follow to extend the lifespan of your ceramic coating. Step 1 – Use the Two-Bucket Method for Washing. Step 3 – Do Not Wash the Vehicle in Direct Sunlight. Step 4 – Use an PH Neutral Car Shampoo. Step 5 – Use Separate Wash Buckets and Mitts for lower areas and Wheels.
What Car Wash is safe for ceramic coating?
A ceramic coating should be washed with an automotive specific shampoo, that is pH neutral, contains no wax, and is ultra-suds producing. Most detergents (like dish soap) are high alkaline or +9 on the pH scale. This can leave a film on top of the coating if not completely rinsed off – or if it dries too quickly.
How do I care for my car after ceramic coating?
We recommend that customers maintain a wash routine that consists of a proper hand wash at least every two weeks. As your coating becomes covered with dirt and contamination, you will notice a decrease in hydrophobic properties (i.e. water beading & sheeting). It is important to remove these surface contaminates often.
Can you use regular car wash on ceramic coating?
The golden rule you should always stick to after a ceramic coating is Do not wash your car within 7 days of application! You need to give the Coating time to fully cure on your vehicle. If you wash or otherwise agitate the surface of the paintwork, it can drastically inhibit the curing process of the product.
How do you wash a ceramic car?
Tips for Maintaining Your Ceramic Coating Step 1 – Use the Two-Bucket Method for Washing. Step 2 – Wash Your Car fortnightly. Step 3 – Do Not Wash the Vehicle in Direct Sunlight. Step 4 – Use an PH Neutral Car Shampoo. Step 5 – Use Separate Wash Buckets and Mitts for lower areas and Wheels.
Can you mess up ceramic coating?
Yes, it is possible to mess up a DIY ceramic coating application. Improper application may cause high spots, streaks, cloudy reflections or hazing. A lot of vehicle owners may not be able to tell if they’ve sanded off enough of the cured ceramic coating, which is what makes this procedure so risky for DIYers.
What should you not do after ceramic coating?
During the curing process avoid: Parking under a trees specially if there are shedding. You don’t want tree sap on a fresh coating. Allowing bird droppings, sap or pollen to sit on the car and bake in the sun. Washing or abrading the paint.
How long after ceramic coating can I drive my car?
Let the Coating Cure The ceramic coating will then take about two to three weeks to cure, depending on the outdoor temperature and humidity levels. But this doesn’t mean you can’t drive your car during this time. You can still use your car, but you do have to be careful.
What happens if ceramic coating gets wet?
If it’s rain water or tap water, the impurities present in both will destabilize the cross link bonds before they can fully form. That can lead to premature coating failure in many instances. That’s why washes and driving in the rain are not recommended during the first week after application.
Can I polish my car after ceramic coating?
While car wax strengthens and protects your finish, car polish corrects and restores the paint surfaces underneath. Because of its restorative properties, applying a polishing compound to your ceramic coating would simply strip away this protective layer, leaving your car with nothing but the exposed clear coat.
What is ceramic car wash?
Industry-grade ceramic coating is a chemical polymer solution that is applied to the exterior of a vehicle to protect it from external paint damage. It blends with the paint of your car and creates an additional hydrophobic layer of protection. Ceramic Sealant is known for: Extreme durability.
How long does a ceramic coating last?
Q: How long does ceramic coating last? With proper care and maintenance, a layer of ceramic coating will keep your car looking new for two to five years. Some professional ceramic coatings can last the lifetime of the car.
Is it worth getting a car ceramic coated?
The short answer is yes. As we have seen in this article, ceramic coating has great benefits that will add value to your car in the long run. It will make your job of cleaning and maintaining it less tedious. So that you spend more time driving and enjoying your car than thinking about ways to keep it protected.
How do you know when ceramic coating is gone?
In the absence of ceramic coating, the drops of water will cling to the car’s surface. When the coating starts to lose its effectiveness, water beading will become less pronounced. You will notice that sheets of water turn into visible beads. This leads to water remaining on exterior surfaces for longer than before.
What helps ceramic coating faster?
One way we like to ensure that our coating applications come out smooth and clean is by using an Infrared Curing Lamp. This tool helps to expedite the curing process by adding heat to concentrated areas of the vehicle’s surfaces for a predetermined amount of time, allowing the coating to harden quicker.
Can I put wax on top of ceramic coating?
After the coating has cured you are able to apply a carnauba wax over the paint. Be sure that the wax is strictly a wax, and does not contain any “cleaners”. This will add some gloss, enhancing the “wet look” of the vehicle. Carnauba waxes generally need to be applied every 3 to 4 months.
Does ceramic coating replace wax?
It is typically assumed that a nano ceramic coating is a replacement for traditional wax. Although a coating will last about 10 times longer than traditional carnauba wax, it’s not necessarily a replacement. It is, however, a superior option for protecting the substrate or surface where it is applied.
How long does ceramic coating take to flash?
Wipe on in one direction, in thin coats, then allow product to “flash” after 30 – 60 seconds depending on temperature. Wipe thoroughly with a new or clean microfiber rag to remove excess product and activate shine.
