Table of Contents
How can I protect my art prints?
Avoid or limit direct sunlight. Know when to frame with acrylic plexiglass, not glass. Pay attention to humidity. Watch your hands. Keep your glass or acrylics squeaky clean. Dust—don’t clean—your paintings. Don’t leave your art in a tube. Keep your stored artwork separated.
What is backing board for art?
Backing boards are a supportive board that goes directly behind your art. It gives your artwork rigidity. For example, a poster might naturally want to sag or buckle, but a backing board will help sandwich the thin poster paper in place.
What are backing boards made of?
Backboards were generally made of cardboard. Occasionally hardwood, wood laminates, fabric or wire mesh screening were employed. Developments in the paper and plastics industries have widened the range of materials suitable for backing boards. Lightweight, large scale boards tend to be either paper based or plastic.
How do you protect prints from moisture?
Place bumper pads at each corner of the back of the picture frame before you hang it on the wall. This creates a space between the picture and the wall, creating air flow. Free flowing air will prevent moisture and mold from building up behind and within the frame.
How do I protect my canvas prints?
The best choice is a giclee gloss coating to give your canvas a professional look and lots of protection. Also known as canvas varnish, a giclee sealer will protect both the ink and canvas from UV rays that can cause fading or yellowing.
What can I use instead of mat board?
Use alternative forms of matboard: Scrapbooking papers (a wide selection can be found at any craft store), recycled, vintage papers (see above!), or even swatches of thick fabric can all be used to mat art and photography.
What can I use for the back of a picture frame?
A dust cover, also called backing paper, is a thin sheet of paper attached to the back of picture frames. Professional picture frames will often refer to using this framing material as a “dust seal,” as the adhered paper prevents dust from entering the picture frame.
How do you make a backing frame?
Apply a strip of ATG tape to the back lip of the frame, all the way around the perimeter. Flip the frame over onto a piece of kraft paper that is slightly larger than the frame (or Tyvek if framing something that will be in a high-moisture area). Press down firmly to be sure the paper sticks. Flip the frame back over.
What are the plastic things on the back of canvases?
These are called canvas tightening keys, also referred to as canvas wedges or stretcher bar keys. Small but mighty, these pieces of wood are to strengthen the canvas if it begins to sag. Canvas keys are normally stapled to the back of a pre-stretched artist’s canvas in a clear plastic bag.
What is acid free mat board?
Paper mat that is made of wood-pulp is often called acid free as the acid is buffered out through a chemical process. These are the Conservation brand of matboards that are sold by most high-end frame shops.
What is foam board backing?
Foamcore, foam board, or ‘paper-faced foam board”””’ is a lightweight and easily cut material used for mounting of photographic prints, as backing for picture framing, for making scale models, and in painting.
How do you make a picture frame waterproof?
Purchase a polyurethane spray sealer to spray on the front and back of your wood frame. Keep in mind that this can leave an amber kind of finish on a white canvas, so protect your art with newspaper if spraying directly onto the frame.
What tape do picture framers use?
1 Sealing The Frame There are two types of tape used:self adhesive;gummed. Gummed tape is the traditional paper tape, and the only one suitable for conservation work and museum work, is gummed paper tapes.
Do canvas prints need to be laminated?
Lamination can protect the canvas print from humidity as this can trigger moulds and fungus to grow on canvas while causing a permanent damage. Another benefit of lamination is to protect the canvas prints against the harmful UV rays. Ultra violet rays affect and damage the color resolution of a canvas.
Can a canvas print be laminated?
A canvas can be laminated using a liquid coating that dries to create a solid coat of plastic over your painting. Lamination will not affect the appearance of a canvas, so you don’t need to worry about your paintings having an unnatural sheen to them after they are laminated.
How do you protect a giclee print?
If your giclee print is on paper, I would recommend a spray varnish such as Golden Archival Spray Varnish or Lascaux UV Protect. Both are archival and offer UV protection, and they are okay to use with art on paper (whether it’s a giclee, an original, or a mix of both!).
Is mat board the same as Mount Board?
Much like mat board, mount board serves to protect a framed photograph or piece of artwork by providing a rigid, sturdy backing to keep photographs and artwork from moving or warping in the frame. The location of mount board is basically the opposite of mat board.
What is matte board made of?
Matboard, also referred to as a mat, is a heavy paper-based material used in the picture framing process. This cardboard-like material sits between a frame and your photography or artwork to give it a complete finished look.
What material is used for picture frames?
Wood, aluminium and polystyrene (styrofoam) are the most common picture frame materials. Solid wood is very popular, though metal and styrofoam frames provide cost, quality, lightweight options.
