Table of Contents
How To Troubleshoot Furnace Blowing Cold Air Step 1: Check Thermostat Setting. First and most importantly, make sure your thermostat is set to Heating Mode. Step 2: Evaluate and Adjust Your Vents: Step 3: Assess Furnace Filters and Replace Filters If They Are Dirty. Step 4: Call An HVAC Pro.
Why is cold air blowing when the heat is on?
A clogged filter is one of the leading reasons for a heater blowing cold air. But even if you swap the air filter with a brand new one, dirt and debris can still be found within the unit. This could eventually lead to overheating. If your furnace looks pretty dirty, call an HVAC provider for a professional clean.
Why is my furnace running but no heat?
Dirty filters are the most common cause of furnace problems. Dust and dirt restrict airflow—and if the filter gets too clogged, the heat exchanger will overheat and shut off too quickly, and your house won’t warm up. If the blower is running but no heat is coming out, replace the filter.
Why is cold air coming out of my vents when heat is off?
This issue could be caused by an improper thermostat setting. Check that the fan blower switch is set to “auto” and not “on.” When the “auto” setting is chosen, the fan will only run during a heating cycle and won’t push air that feels cooler through the vents in between cycles.
Where is the reset button on a furnace?
Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.
Why won’t my furnace shut off?
If your furnace won’t turn off, the easiest issue to fix is your thermostat. A furnace that is working hard to keep a high temperature, especially when it’s extra cold outside, can seem to run continuously. The second common thermostat problem is the fan switch. Your fan can be adjusted manually from your thermostat.
Why is no air coming out of my vents?
The most common cause of low air flow through the vents in your home is blocked or dirty AC filters. When you clean or change your AC filters, be sure to vacuum the metal grates closing the filters in at the same time. Another way to prevent common home cooling problems is to clean your AC registers on a regular basis.
How do I stop cold air coming through my vents?
How to Keep Cold Air Out of Your Vents Install insulation. Poor insulation causes rapid cooling of the air as it moves through your home. Check connections. Over time, the connections in your ductwork can come loose. Update your HVAC. Older HVAC systems are less efficient and require more upkeep than modern models.
Should you cover cold air returns in winter?
Because hot air rises and cold air falls, you need to adjust your return vents with the seasons. In the summer, your lower vents should be closed and your upper vents should be open. In the winter, your upper vents should be closed and your lower vents should be open.
How long does it take for furnace to reset?
Either way, restarting a furnace is a relatively simple task that takes no longer than 10 minutes to complete. Follow these steps to reset your gas furnace: Turn the circuit breaker off and switch the furnace power button off too. Never touch the breaker with wet hands and use only one hand to do it.
Do all furnace blower motors have a reset button?
All furnaces are equipped with a reset button. They are generally red or yellow and are located inside the blower compartment. The reset button is a safety feature that will shut down the furnace when a problem is detected, often a hot or overheating furnace, before it trips the circuit breaker.
How many times can I hit the reset button on my furnace?
Don’t hit “reset” more than twice. The process pumps oil into the burner chamber, where it can accumulate if you have no ignition. Then when the furnace finally does start, it can do so explosively. So if the button won’t reset, or quickly pops up again, it’s time to call a professional repair service.
Why is my furnace blowing cold air and won’t shut off?
If it’s cold, that means that your furnace is not running but the air handler is still blowing air. If the air is hot, obviously, the furnace is on. If the air is cold, the first suspect is the thermostat. Check to make sure the fan is set to AUTO, and not to ON, which would cause it to run continuously.
Can I turn my furnace off?
An electric furnace is easy to turn off – simply flip the emergency switch to the “OFF” position. If you’re not sure how to turn off your gas furnace, however, you just need to turn off the main gas supply.
Is it OK for my furnace to run constantly?
Overall, it can be said that you can run your furnace continuously without worrying about whether it will break or not. Running a furnace constantly can offer improved quality of air, even temperature, and better air circulation. However, it can slightly raise the frequency of maintenance and electricity bills.
