Table of Contents
In most cases, drywall is cut by scoring through the paper on the finish side (the one with white paper) using a sharp drywall knife. As soon as you notice the blade dulling, turn it around or replace it. Blades are cheap. Once that side is scored, bending the drywall away from the cut breaks the gypsum core.
What kind of blade do you use to cut drywall?
Professional drywall hangers use a regular razor knife to make straight cuts on drywall. Standard drywall, or sheetrock, is simply a “sandwich product.” It consists of two outer layers of special paper that conceal a gypsum-based core.
What is the best way to cut out drywall?
With a sharp utility knife or other cutting tool, follow the pencil line and lightly cut through the paper layer of drywall. Tip: The best tools for cutting drywall are utility knives, putty knives, reciprocating saws, oscillating multi-tools and track saws with dust collectors.
Can you cut drywall with a razor?
The most commonly used tool for cutting drywall is the razor or utility knife. You score the panel, apply some pressure, and snap! You’ve got a new, clean edge.
Can you cut drywall with oscillating tool?
For getting precise cuts in less time, an oscillating multi-tool is the best tool to cut drywall with. Your other drywall cutting tools might still come in handy for some of your cuts, but an oscillating multi-tool can be great for long, straight cuts as well as smaller precision cuts.
Can I cut drywall with a jigsaw?
A utility knife saw blade, drill with a drill bit, marking tools, and drywall rasp are all helpful when it comes to cutting sheetrock. A jigsaw can cut a variety of holes in drywall including standard, rectangular, and plunge cuts.
Can you cut drywall with a Dremel?
A Dremel equipped with a drywall cutting bit is an excellent tool for cutting around in-wall electrical boxes and other fixtures. It makes clean holes that allow you to install drywall and run your wiring for switches, outlets, and any other in-wall elements.
Do you cut sheetrock from the front or back?
Sawing. A drywall saw is used to make cuts for windows and doors while a smaller keyhole saw is perfect for cutting around electrical boxes and other small openings. Make the cuts from the front side when possible to keep from roughing up the paper on the face.
What is a drywall cutout tool?
A cutout tool is bigger, heavier and designed for tougher jobs such as removing grout or cutting drywall. A rotary tool is small, lighter and can be held like a pencil. A rotary tool is used for finer projects such as stenciling, sanding in light places or polishing.
Can you use a router to cut drywall?
A spiral saw, which is actually a mini router, is one of the best tools for cutting openings in drywall for electrical boxes. It lets you cut holes quickly and accurately without the time-consuming measuring and marking usually required.
What’s the difference in sheetrock and drywall?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.
Can I cut drywall with a hand saw?
A lot of Pros use small, handheld keyhole saws to rough-in boxes for outlets and switches. Simply use a “new-work” outlet box to trace the hole to be made in the drywall (typically applicable for old work or renovation). Then use the keyhole saw to make the cut.
What is a good drywall saw?
The 8 Best Drywall Saws: DEWALT DWHT20123 Folding Drywall Saw – Best Overall. Shark 10-2206 Rockeater Drywall Saw. Stanley 15-206 Jab Saw For Drywall – Best Value. Goldblatt 6” Drywall Saw. Gunpla 6” Pro Drywall Saw (2 pcs.) IRWIN Tools Standard Drywall/Jab Saw. Klein Tools 31737 Drywall Saw.
How do you cut a straight line with an oscillating tool?
How to Cut Straight. To create a straight cut, a round or half-moon saw blade works best. You want to lightly press down on your tool creating a cut no more than 1/4 inch deep. Run your blade across the length of the cut multiple times with each pass making it a little deeper until you cut through your material.
Can you cut plasterboard with a multi tool?
How to cut plasterboard with a multi-tool. Once you are happy the cut line is accurate, attach the Fine Tooth blade to your multi-tool. Glide the blade through the cut line with minimal pressure, allowing the multi-tool to do the work.
What can you use an oscillating tool for?
What is an oscillating tool used for? Trimming pipes and screws. Plunge cuts in your decking. Trimming wood and floorboards. Cutting out openings in drywall. Removing rust from metals. Sanding down furniture. Scraping adhesive. Removing mortar.
Do I need a drywall rasp?
A drywall rasp is a handy tool for fine tuning cuts for drywall. A drywall rasp comes in handy on occasions where a piece of drywall is cut out for windows, patches, receptacles or other holes and is too large. A drywall rasp acts similar to a cheese grater skimming off small amounts of drywall with each pass.
Which side do you cut drywall?
How to Make Simple Knife Cuts to Drywall. In most cases, drywall is cut by scoring through the paper on the finish side (the one with white paper) using a sharp drywall knife. As soon as you notice the blade dulling, turn it around or replace it.
Can I use my Dremel as a Rotozip?
Are Dremel Bits Compatible With The Rotozip? The tools have different motions, and the Dremel bits aren’t likely to work well with the Rotozip. There is some overlap in their bit sizing, though. The Dremel uses bits from 1/8 inch down to a tiny 1/32 inch.
Can you drill a hole in a wall with a Dremel?
The Dremel can drill small holes, simply because the chuck sizes is small. You would need to use a very low speed, since drilling concrete is not like drilling wood (the bit will get hot and break if you go to fast). you need a hammer drill for that kind of work.
