Table of Contents
Mix soap and warm water, similar to the ratio you might use to wash your dishes. Dip the deck brush into the bucket of soapy water and start scrubbing your deck. Don’t be afraid to apply significant pressure to clear away as much dirt as possible—composite is hardy and can take it.
What is the best cleaner for composite decking?
When it comes to cleaning decking, we recommend a basic cleaning with a composite deck cleaner or combination of soap, hot water and a soft bristle brush. Ideal times for cleaning decking are just after installation and then on a semi-annual basis (typically spring or autumn is most conducive with the weather).
Can you use Dawn to clean composite decking?
Spray the deck with a hose to remove surface dirt and debris. Clean the deck with a soft-bristle brush and warm, soapy water. (Trex doesn’t specify a brand of soap, so a dish soap such as Dawn is a good choice.) The brush will ensure you’ll get any dirt in the embossed pattern.
Can you use bleach to clean composite decking?
By far, one of the worst products you can use (and is often recommended) on your composite deck is Chlorine Bleach. Chlorine Bleach has been proven to kill bacteria and viruses on non-porous surfaces, but has not been proven effective in killing mold from porous surfaces, such as composite decking.
How do you clean dirty composite decking?
Spray deck with soap, then follow by gently scrubbing each deck board with a soft bristle brush. Spray/rinse each individual deck board using a fan tip no closer than 8-in (203 mm) from the decking surface. RINSE THOROUGHLY. If dirty water from cleaning is left to dry, a film will remain on the decking surface.
Can you clean a composite deck with vinegar?
For mold removal, try cleaning composite decking with vinegar. Use your hose to remove as much of the surface grime and mold as possible. Mix two parts vinegar and one part water into a bucket and pour the solution directly on the mold. After the solution is poured, sprinkle some baking soda on the area.
What is the best homemade deck cleaner?
DIY Organic Deck Cleaner Recipes 1 gallon of warm water. 3/4 cup of oxygen bleach. 1 cup of powdered laundry detergent. 1 gallon of water. 2 cups of rubbing alcohol. 1 quart of household bleach. 1 cup of ammonia-free soap. 1 gallon of water. 1 cup of apple cider vinegar. 1/2 cup of lemon juice. 1 tablespoon of baking soda.
Can you use Simple Green on composite decking?
Simple Green Deck and Fence Cleaner is ideal for both manual and pressure washing your entire deck, lifting dirt, grease and sap from wood and composite surfaces. If using a pressure washer, avoid using a maximum pressure setting, as too much force can damage the wood fibers.
Can I clean my deck with dish soap?
Liquid dish soap (ammonia-free) is safe for use on cleaning your deck when mixed with a little warm water. Once you’ve blended your mixture, swab it on your deck and rinse it clean with water. Oxygen bleach or powdered oxygen laundry cleaner is safe for use on wood decks and useful in removing mold or spores.
How do you get green mold off a composite deck?
Step 3: Rinse Deck with Pressure Water or Hose + Scrub Brush Once the deck is completely saturated, Rinse it off thoroughly with water, a pressure washer and/or a scrub brush. A scrub brush will assist in the removing stains from moss, mold, algae and lichen.
Can you use washing up liquid to clean decking?
To avoid damaging the deck, create a delicate cleaning solution made up of warm water and washing up liquid. Let the solution stand for 5-10 minutes, or according to the instructions on the deck cleaner if using. Lastly, rinse the area with clean water and leave the wood to dry.
Can I use floor cleaner on composite decking?
Although the surface looks solid, composite decking is actually quite porous. Therefore, it needs an oxygenated cleaner that can reach deep into the material and clean inside the deck as well as the surface. When purchasing a cleaner, always check the label and NEVER use a Chlorine Bleach based “deck cleaner”.
How do you clean composite decking with OxiClean?
Mix 1 cup OxiClean and 1 gallon water in a cleaning bucket. Rinse off your deck with the garden hose to loosen debris and buildup. Dip a nylon scrub brush into the water and OxiClean mixture and scrub it over the deck. Rinse off your deck once more to wash away all of the lifted buildup, and let the deck air dry.
How do you clean GREY composite decking?
General instructions for cleaning: Use a soft brush, vacuum cleaner or leaf blower to get rid of dirt and debris. Hose down your decking to get rid of excess dirt and debris. Mix some warm, soapy water into a clean bucket ready to wash.
Can you use baking soda to clean a deck?
Baking soda: Mix a gallon of water and a cup of baking soda, stirring up the solution until the baking soda is completely dissolved. You can then use a scrub brush or broom brush to thoroughly scrub the deck with the mixture before you rinse it clean with water. Yes, you can use Oxyclean® on your deck.
How do you remove mold and mildew from composite decking?
Step 1: Pour UltraBan into clean pump sprayer. DO NOT add water. Step 2: Spray surface to saturation. Apply to a completely dry deck for best results. Step 3: Keep wet for at least 15-20 minutes. Step 4: After about 10 minutes wet the sponge mop with UltraBan and wipe the surface once or twice. Step 5: Allow to dry.
What household items can you use to clean decking?
To clean your deck, combine 1 cup vinegar with 1-gallon water. Sprinkle baking soda on any mildewed wood and use the vinegar and warm water to scrub over all the boards. Borate is also a natural cleaner and versatile for indoor or outdoor cleaning. Use a ratio of one cup of Borax to one gallon of water.
