Table of Contents
Using a cloth moistened with whiteboard cleaner is enough to keep a board clean if used every week. Warm soapy water, window cleaner and peroxide all work well too. Be sure to stay away from wax-based cleaners as they leave a pesky film on the whiteboard.
Can you use Windex to clean a dry erase board?
Use water or common household glass cleaners. Can you use Windex® to clean a dry erase board? Yes, products such as Windex® are recommended for cleaning a whiteboard. Never use scouring pads or abrasive cleaners, as those can ruin the dry erase surface and allow ink penetration.
What is the best cleaner for dry erase boards?
Isopropyl alcohol, often referred to as rubbing alcohol, and hydrogen peroxide are very effective ways to clean whiteboards. They are especially effective at getting rid of ghosting caused by chemical build up residue from whiteboard markers. For best results, use 99% or 90% isopropyl alcohol.
Do Clorox wipes ruin dry erase boards?
Do not use glass cleaner, Clorox® wipes, or all-purpose cleaners as they will damage the whiteboard surface and void the warranty. The surface should be cleaned only with dry erase wipes, liquid board cleaner, or a damp wet cloth. Abrasives or other chemical cleansers should not be used.
How do you clean an old marker off a dry erase board?
Use rubbing alcohol. You can put rubbing alcohol directly on a paper towel or tissue and rub that on the old marks. Many hand sanitizers contain rubbing alcohol. Rub them directly on the old marks and wipe off of the board. For tough stains, rub a few drops of isopropyl alcohol around with your finger on the old marks.
How do you make homemade whiteboard cleaner?
Simply mix one part water and one part alcohol in a spray bottle, squirt some on the board and rinse with a soft, damp cloth. If you need a little extra cleaning power, use the alcohol at full potency rather than diluting it with water.
What is in magic eraser?
The truth is, Magic Erasers are just tiny rectangular pieces of melamine foam with a cleaning agent inside. A melamine sponge is more dense than your average cleaning sponge and its tiny pores make it a light abrasive, not unlike that of an extra fine sheet of sandpaper.
Can you use Goo Gone on a whiteboard?
Tips To Make Your Dry Erase Board Last Always use a soft, non-abrasive cloth to remove ink, such as a microfiber cloth. If your whiteboard is used daily, it should be cleaned daily. Goo Gone is a great way to remove dry erase markers, but not wet erase markers.
Can you use Lysol to clean whiteboard?
You should also know that there are a few solutions that you should NOT use on a whiteboard or dry erase board. Window cleaners (even our homemade window cleaner!), and Clorox, Lysol, or other disinfecting wipes could strip the finish on the board.
Can you use bleach on a dry erase board?
Whiteboard Cleaning and Care: Clean your cloths on a regular basis. A dirty cloth will leave ink residue on your writing surface. (Everase® Micro-Fiber Eraser Cloths are machine washable with regular detergent. No bleach.).
What is in Expo dry erase cleaner?
Ingredient Information Deionized Water. Function : Universal solvent. 1-Butoxy-2-Propanol. Function : Coupling agent/solvent. PPG-2 Methyl Ether. Function : Coupling agent/solvent. Methylisothiazolinone. Function : Biocide. Sodium Carbonate. Function : pH adjuster. C12-15 Pareth-4. Function : Surfactant. Download SDS.
What is the active ingredient in whiteboard cleaner?
Water (CAS# 7732-18-5), Denatured alcohol (CAS# 64-17-5), Cocamidopropyl betaine (CAS# 61789-40-0), Potassium sorbate (CAS# 579-00-1), Citric acid (CAS# 77-92-9).
Will vinegar remove dry erase marker?
Vinegar can also be used to remove permanent marker from dry erase boards. Use a simple solution of equal parts water and vinegar and wipe with a clean cloth or paper towel.
How do you clean a white board with vinegar?
Make a solution of 1 teaspoon of white vinegar to every 1 cup of water. Put it either in your spray bottle or bowl. Either dampen the cloth from the bowl and wipe down the board, or spray the solution directly onto the board, and use the cloth to spread it around and wipe it down.
What should you not use magic eraser on?
When not to use Magic Eraser Shiny painted, enameled, sealed, or varnished surfaces. Magic Eraser can strip away the finish. Wood. Magic Erasers can scratch and strip the finish. Your car. Natural stone surfaces, including granite and marble. Non-stick pots and pans. Stainless steel. One-of-a-kind collectibles. Screens.
Can I use a magic eraser on my teeth?
Magic Eraser is a Mr. Clean-branded line of cleaning pads made with chemicals that should not be consumed or used on any body parts. Dr. Richard Black, dean of the Hunt School of Dental Medicine, said trying dangerous trends such as this one could pose lifelong damage to your teeth.
What is generic magic eraser?
Clean magic erasers hit the scene, I’ve been using them to tackle some of the tougher jobs around the house. But I recently discovered that there are generic versions of magic erasers—it’s just a non-proprietary material called melamine foam—that can be scooped up for cheaper than the Mr. Clean brand.
Can you use baby wipes on a whiteboard?
Wipe with baby wipes or disinfectant wipes. The key is that you must use a soft cloth to dry the board thoroughly after wiping. (Do not use a tissue that has hand softener in it – it will leave a residue on the Whiteboard.)Mar 25, 2014.
