Table of Contents
5/8-Inch-Thick Drywall When installed on ceilings, 5/8-inch-thick panels are less susceptible to sagging between the joists than 1/2-inch panels. Adding popcorn texture or another type of heavy surfacing material can add to the weight problem, making 5/8-inch drywall a better choice for ceilings.
Can you use 3/8 drywall ceiling?
Joe, yes you can use 3/8-inch drywall on ceilings like this. It’s the BIBLE of everything drywall and plaster. In this great book you’ll find the minimum recommendations for installing 3/8-inch drywall, including fasteners, spacing, etc.
How thick should a ceiling be?
For interior walls or ceilings in residential spaces, the local building codes usually dictate a thickness of half an inch. The thinner drywall panels, like the quarter-inch or 3/8-inch versions, are not thick enough to handle the rigors of daily life on their own.
What size is ceiling sheetrock?
One-half inch panels are standard on the ceiling. Drywall comes in large, flat, gypsum-core panels wrapped with a strong, paper skin. The panels, which are 4-feet wide, are available in lengths ranging from 8 to 16 feet.
Can you use 1/2 inch drywall ceiling?
1/2-Inch-Thick Drywall Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. These panels are easy to carry and hang.
Is lightweight drywall good for ceilings?
There is no appreciable design advantage for ultralight drywall over standard drywall. This is a material that can be used for all wall and ceiling finish surfaces in any residential application.
Should you stagger ceiling drywall?
It’s not necessary to stagger seams on ceiling drywall. However, because these joints are relatively difficult to finish—and tend to be noticeable in the finished product—it’s a good idea to stagger the drywall panels to make the joints less visible.
What is quarter inch drywall used for?
Quarter-inch drywall is often used to cover damaged plaster walls and also for curved areas because it bends easier than thicker drywall. Then the 1/4-inch-thick drywall can be double layered to get to the conventional 1/2 inch thickness to match the rest of the wall.
Do you hang drywall ceiling before walls?
Hang drywall on the ceiling first, then the walls. Check the ceiling for bowed joists using a 4-ft. level.
What is the standard drywall thickness?
Most drywall measures 1/2-inch thick. It’s the most common choice for interior walls because they are easy to carry and hang. If weight is a concern, consider ultra-light half-inch drywall.
What size sheetrock do you use for walls?
The most common thickness of drywall used in residential interior construction is 1/2 inch. This material is recommended for walls with studs placed 16 inches on center. If the wall studs are placed 24 inches on center, a 5/8-inch drywall is recommended.
How long should drywall screws be for ceiling?
Screws that measure 1-1/4 inch in length are appropriate for sheets of drywall that are 3/8, 1/2 or 5/8 of an inch thick, while screws that measure 1-3/8 inches are meant for sheets of drywall up to ¾ of an inch thick.
What size screw should I use for 1/2 drywall?
Choosing the right drywall screw Most common — 1-1/4”: Use 1-1/4” drywall screws to secure 1/2″ drywall installed on wood-stud walls. These coarse-thread screws typically feature phosphate coatings, which better protect against rust compared to zinc coatings.
Does thicker drywall help with sound?
So, here’s how thick walls should be to be soundproof: A standard stud wall built properly, and consisting of 2 sheets of drywall with an air cavity 5 to 6 inches thick, is good enough to make the wall soundproof. A concrete wall would have to be around a foot thick to be completely soundproof.
How far apart should ceiling joists be for drywall?
Regular 1/2-inch drywall ceilings can be hung perpendicular if joists are spaced 24 inches or less apart (*always refer to local codes). If hung parallel, the maximum spacing is 16 inches on center.
How far can you SPAN 1/2 drywall on ceiling?
What is the maximum joist spacing for ceiling drywall? Does it matter if the panels are oriented parallel or perpendicular to the joists? 1/2- or 5/8-inch drywall is 24 inches on-center. Ceiling drywall should always be installed perpendicular to the joists, even when they are 16 inches on-center.
What is code for hanging drywall?
Both the International Residential Code (IRC) and USG, the manufacturer of Sheetrock, note that the recommended maximum field screw spacing for wall drywall is 16 inches. Some builders like to space fasteners tighter than that, so they go down to 12 inches.
Is there such a thing as 3/4 drywall?
3/4-inch drywall can also be used to patch or fix patches of drywall where the plaster has worn off or been removed. This drywall thickness is available in a variety of panel lengths. It is often used for walls and ceilings, and are considered a standard type of drywall for most residential spaces.
How much does a 12 foot sheet of 1/2 inch drywall weigh?
One-half-inch board weighs 54.4, 68 or 81.6 pounds for sheets of eight, 10 or 12 feet. Boards 5/8 inch thick weigh 73.6, 92 or 110.4 pounds per eight, 10 or 12 feet.
What is the difference between gypsum board and sheetrock?
 Gypsum is a natural mineral while drywall is a manufactured product. Gypsum is a mineral containing water while drywall consists of gypsum plaster, which contains no water, pressed between two thick paper panels. 3. Gypsum in its natural form is crystalline whereas drywall is not since the plaster is in paste form.
What does a 4×12 sheet of drywall weight?
However total weights in lbs may differ by size and by brand. By the sheet, standard drywall sheeting comes in at: 4′ by 8′ by ½ is close to 52 pounds 4′ by 12′ by ½ is close to 77 pounds.
