Table of Contents
OSB used for wall sheathing should be 7/16 inch thick.
Can I use 7/16 OSB for wall sheathing?
Install structural sheathing (plywood/OSB) in exterior walls to ensure the building will resist design wind pressures. Select the appropriate thickness for wood structural sheathing panels. Minimum: 7/16” thickness. (Exception: 3/8” for gable end walls structural sheathing.)Sep 27, 2020.
What size OSB should be on exterior wall?
Exterior walls Minimum thickness of wall sheathing for use on walls; 3/8″ plywood or 5/16″ OSB. If you use fibre cement siding, go with 1/2″ plywood or 7/16″ OSB for the exterior walls. The wall sheathing can be nailed or stapled (check your local building code).
What thickness OSB do I need?
If you are using OSB for your roof deck, then ⅝” is the recommended thickness. For plywood, which is slightly stronger than strand board, ½” thick is appropriate. Another factor is how far apart your trusses or rafters are spaced.
How thick should exterior wall sheathing be?
The International Residential Code specifies 3/8-inch plywood for sheathing walls with a standard stud spacing of 16 inches, if the siding is nailed to the studs through the sheathing. If the nails penetrate the sheathing, but not the studs, the minimum plywood thickness that the IRC designates is 1/2 inch.
What can I use for wall sheathing?
There are many exterior wall sheathing options available, with wood sheathing being one of the most commonly used materials. Wood sheathing materials include plywood, oriented strand board (OSB), and waferboard. Plywood is made of whole sheets of wood that are cross-laminated.
Can I use OSB for interior garage walls?
OSB is a effective sheathing material for garage walls. It’s strong and durable, and it can be used as a base for nailing or stapling insulation to garage walls. OSB can be left uncovered for utilitarian bare-wall constructions, but can be primed and painted.
Can you use 1/4 plywood walls?
Any good, solid 1/4 plywood will be fine for the walls.
Should OSB be installed vertically or horizontally?
If the height of a wall is less than 8-feet, install the plywood (or OSB) vertically. If the height of a wall is greater then 8-feet, install the plywood (or OSB) horizontally.
What kind of plywood do you use for wall sheathing?
Structural Fiberboard Plywood and OSB are largely considered the best wall sheathing choices because of their overall abilities to hold fasteners well, create a strong bond between studs, and provide some thermal advantages.
Can I use OSB for shed walls?
Using Oriented Strand Board is a tested way of reducing costs for building your shed. Plywood with similar properties currently costs about 30% more for an equivalent thickness.
What thickness is OSB board?
They are fairly straightforward but each one is fairly specific. The thickness of OSB that you need varies on where it is used in a building. Typically 3/4″(18mm) for floors and 3/8″ (9mm) for walls and 1/2″ (11mm) roof. Also make sure that you get your supporting timbers at the correct spacing.
What is the R value of 7/16 OSB?
7/16” OSB R-Value = 0.51.
Can OSB be used for exterior sheathing?
Five common structural exterior sheathing options include wood-based, gypsum, glass mat, cement board, and Barricade® Thermo-Brace®. Oriented strand board (OSB) is a durable panel sheathing made from hundreds of thin wood strands that are hot pressed onto sheets with a wax and resin adhesive.
Is 7/16 OSB OK for roofing?
Standard types of wood designed for roof sheathing are oriented strand board, known as OSB, and plywood, the most popular being OSB. Sheets of 7/16-inch thick, without edge support, can be used in an area where the snow load is 30 pounds per square foot.
What is the distance between studs in a wall?
The general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.
Will OSB prices go down in 2021?
In more recent news, however, a market correction in the form of a sharp OSB price decrease in the second half of July 2021 appeared, leading to a projected rebalance between production and consumption, possibly due to a seasonal slowdown in home construction.
How thick should plywood be for garage walls?
The exact answer is 3/8-inch, and it’s the minimum plywood thickness. The International Residential Code specifies 3/8-inch plywood for sheathing walls with a standard stud spacing of 16 inches, if the siding is nailed to the studs through the sheathing.
Can I use 1/2 inch drywall in my garage?
For the majority of your garage, you can use standard 1/2 inch drywall. For the ceiling and wall abutting the house (if this is an attached garage), you should use 5/8-inch sheetrock or type X fire-rated drywall. For the walls not abutting the house, you can use standard drywall sheets.
What is code for drywall in a garage?
R302. 6 Dwelling/garage fire separation: The wall between a house and garage must be separated by 1/2″ drywall. This also applies to structural members, and this extends to the attic in a common-sense type of way; the garage needs to be separated from the house.
