Table of Contents
5/8-Inch-Thick Drywall When installed on ceilings, 5/8-inch-thick panels are less susceptible to sagging between the joists than 1/2-inch panels. Adding popcorn texture or another type of heavy surfacing material can add to the weight problem, making 5/8-inch drywall a better choice for ceilings.
Can you use 3/8 drywall ceiling?
Joe, yes you can use 3/8-inch drywall on ceilings like this. It’s the BIBLE of everything drywall and plaster. In this great book you’ll find the minimum recommendations for installing 3/8-inch drywall, including fasteners, spacing, etc.
Do ceilings have to be 5/8 drywall?
5/8″ Type X is most commonly used for ceilings due not only for its rigidity (no sagging), but also its fire-resistance and acoustical blocking. You’ll certainly want to use at least 2-inch drywall screws to hang it. Not sure adhesive is necessary or recommended unless you are covering existing drywall.
How thick should a ceiling be?
The floor of one level of a home shares framing with the ceiling of the level below it. In a typical home, the entire structure between levels can be about 12 to 14 inches thick, depending on the type of joists used and the finish materials for the floor and ceiling.
How do I choose drywall thickness?
Choosing a Drywall Thickness 1/4-Inch Drywall: The thinnest of all the options, 1/4-inch drywall is most commonly used as a skimming material. 3/8-Inch Drywall: Just slightly thicker than 1/4-inch drywall, 3/8-inch drywall is also a good choice for curved walls. 1/2-Inch Drywall: 5/8-Inch Drywall:.
Where can I use 1/4 inch drywall?
Quarter-inch drywall is often used to cover damaged plaster walls and also for curved areas because it bends easier than thicker drywall. Then the 1/4-inch-thick drywall can be double layered to get to the conventional 1/2 inch thickness to match the rest of the wall.
Is lightweight drywall good for ceilings?
There is no appreciable design advantage for ultralight drywall over standard drywall. This is a material that can be used for all wall and ceiling finish surfaces in any residential application.
What is the thinnest drywall for ceilings?
¼” Drywall: This is the thinnest sheet of drywall available. It is the ideal choice for remodeling your basement, or for any residential interior walls and ceilings that do not require thick reinforcement.
How thick is a residential ceiling?
For interior walls or ceilings in residential spaces, the local building codes usually dictate a thickness of half an inch. The thinner drywall panels, like the quarter-inch or 3/8-inch versions, are not thick enough to handle the rigors of daily life on their own.
Should you stagger ceiling drywall?
It’s not necessary to stagger seams on ceiling drywall. However, because these joints are relatively difficult to finish – and tend to be noticeable in the finished product – it’s a good idea to stagger the drywall panels to make the joints less visible.
Which way do you run ceiling drywall?
On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. However, on residential jobs, the drywall on the walls is typically hung horizontally. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits.
What is code for hanging drywall?
Both the International Residential Code (IRC) and USG, the manufacturer of Sheetrock, note that the recommended maximum field screw spacing for wall drywall is 16 inches. Some builders like to space fasteners tighter than that, so they go down to 12 inches.
What is code for garage drywall?
R302. 6 Dwelling/garage fire separation: The wall between a house and garage must be separated by 1/2″ drywall. This also applies to structural members, and this extends to the attic in a common-sense type of way; the garage needs to be separated from the house.
Can you drywall walls before ceiling?
When hanging drywall, always hang the ceiling first. This is the hardest drywall to hang, so get a partner and go slow. Large cracks due to misaligned sheets are hard to repair because the extra mud required to fill them will constantly fall out and drop to the floor (or worse, down the back of your neck!).
Is ceiling drywall different from wall drywall?
In material make-up, no. However, drywall sheets on residential walls are usually 1/2″ thick, where the ceiling drywall/sheetrock is usually 5/8″ thick. The purpose for this is to reduce the issue of the ceiling sagging between ceiling joists and THAT’S a good thing!.
Is there such a thing as 3/4 drywall?
3/4-inch drywall can also be used to patch or fix patches of drywall where the plaster has worn off or been removed. This drywall thickness is available in a variety of panel lengths. It is often used for walls and ceilings, and are considered a standard type of drywall for most residential spaces.
What size screw should I use for 1/2 drywall?
Choosing the right drywall screw Most common — 1-1/4”: Use 1-1/4” drywall screws to secure 1/2″ drywall installed on wood-stud walls. These coarse-thread screws typically feature phosphate coatings, which better protect against rust compared to zinc coatings.
What kind of drywall do you use for a bathroom ceiling?
Conventional drywall is commonly used for ceilings in non-shower/tub areas of bathrooms, although some builders prefer to use moisture-resistant drywall — aka greenboard — instead. Moisture-resistant drywall is similar to standard drywall but has face paper that’s treated for extra resistance to mold and moisture.
