Table of Contents
5/8-Inch-Thick Drywall When installed on ceilings, 5/8-inch-thick panels are less susceptible to sagging between the joists than 1/2-inch panels. Adding popcorn texture or another type of heavy surfacing material can add to the weight problem, making 5/8-inch drywall a better choice for ceilings.
Can you use 3/8 drywall ceiling?
Joe, yes you can use 3/8-inch drywall on ceilings like this. It’s the BIBLE of everything drywall and plaster. In this great book you’ll find the minimum recommendations for installing 3/8-inch drywall, including fasteners, spacing, etc.
What is the thinnest drywall for ceilings?
¼” Drywall: This is the thinnest sheet of drywall available. It is the ideal choice for remodeling your basement, or for any residential interior walls and ceilings that do not require thick reinforcement.
Is lightweight drywall good for ceilings?
There is no appreciable design advantage for ultralight drywall over standard drywall. This is a material that can be used for all wall and ceiling finish surfaces in any residential application.
Can you use 1/2 inch drywall ceiling?
1/2-Inch-Thick Drywall Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. These panels are easy to carry and hang.
Should you stagger ceiling drywall?
It’s not necessary to stagger seams on ceiling drywall. However, because these joints are relatively difficult to finish—and tend to be noticeable in the finished product—it’s a good idea to stagger the drywall panels to make the joints less visible.
Is it better to hang drywall vertical or horizontal?
On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits. Fewer seams. Horizontal hanging reduces the lineal footage of seams by about 25%.
What is code for garage drywall?
R302. 6 Dwelling/garage fire separation: The wall between a house and garage must be separated by 1/2″ drywall. This also applies to structural members, and this extends to the attic in a common-sense type of way; the garage needs to be separated from the house.
What is code for hanging drywall?
Both the International Residential Code (IRC) and USG, the manufacturer of Sheetrock, note that the recommended maximum field screw spacing for wall drywall is 16 inches. Some builders like to space fasteners tighter than that, so they go down to 12 inches.
When should you use 3/8 drywall?
Just slightly thicker than 1/4-inch drywall, 3/8-inch drywall is also a good choice for curved walls. This thickness is most often used to repair existing drywall that needs patching. 1/2-Inch Drywall: Most drywall measures 1/2-inch thick.
Does thicker drywall help with sound?
So, here’s how thick walls should be to be soundproof: A standard stud wall built properly, and consisting of 2 sheets of drywall with an air cavity 5 to 6 inches thick, is good enough to make the wall soundproof. A concrete wall would have to be around a foot thick to be completely soundproof.
What is the difference between gypsum board and sheetrock?
 Gypsum is a natural mineral while drywall is a manufactured product. Gypsum is a mineral containing water while drywall consists of gypsum plaster, which contains no water, pressed between two thick paper panels. 3. Gypsum in its natural form is crystalline whereas drywall is not since the plaster is in paste form.
What thickness drywall do I need?
1/2-inch drywall is the most versatile board and common thickness for the 16-inch on-center interior walls in most homes. It offers a good balance between strength and weight. 5/8-inch drywall is a heavier product that resists sagging in ceilings and in 24-inch on-center walls.
How thick should a ceiling be?
The floor of one level of a home shares framing with the ceiling of the level below it. In a typical home, the entire structure between levels can be about 12 to 14 inches thick, depending on the type of joists used and the finish materials for the floor and ceiling.
What size screw should I use for 1/2 drywall?
Choosing the right drywall screw Most common — 1-1/4”: Use 1-1/4” drywall screws to secure 1/2″ drywall installed on wood-stud walls. These coarse-thread screws typically feature phosphate coatings, which better protect against rust compared to zinc coatings.
How far can you SPAN 1/2 drywall on ceiling?
What is the maximum joist spacing for ceiling drywall? Does it matter if the panels are oriented parallel or perpendicular to the joists? 1/2- or 5/8-inch drywall is 24 inches on-center. Ceiling drywall should always be installed perpendicular to the joists, even when they are 16 inches on-center.
Should I sheetrock the ceiling or walls first?
Hang drywall on the ceiling first, then the walls. Check the ceiling for bowed joists using a 4-ft. level.
Is there such a thing as 3/4 drywall?
3/4-inch drywall can also be used to patch or fix patches of drywall where the plaster has worn off or been removed. This drywall thickness is available in a variety of panel lengths. It is often used for walls and ceilings, and are considered a standard type of drywall for most residential spaces.
