Table of Contents
Half-inch cement backer board is ideal for most tiling jobs, including walls, floors, countertops, and ceilings. For flooring, the backer board should be installed over a 5/8-inch thick OSB or plywood base. For countertops, use 3/4-inch plywood beneath the backer board.
Can you use 1/4 inch cement board on floors?
1/4″ USG Durock® cement board is an ideal substrate for floor and countertop ceramic tile installations. The 1/4″ thickness helps eliminate transition trim when abutting carpet or wood flooring and minimize level variations with other finish materials.
Can you use 1/2 inch cement board on floors?
Floors. Both 1/4- and1/2-inch cement board are appropriate for floors. To install cement board on floors, cement board manufacturers mandate a 5/8-inch plywood subfloor or OSB underlayment. Manufacturers also recommend bonding cement board to floors with a 1/4-inch polymer-modified thinset coating.
Can you use 1/4 Hardibacker floors?
We recommend 1/4 in HardieBacker® board for floor applications, unless 1/2 in thickness is needed for transition. On existing structures: Ensure subfloor is not damaged. Replace any loose, warped, uneven or damaged sections of floor.
How thick should cement backer board be?
Cement Board Thickness Cement backer board comes in two standard thicknesses, 1/2 inch and 1/4 inch. The industry standard is to use 1/2-inch-thick backer board on wall tile installations, such as a tub surround.
Can I just screw down cement board?
Screw and Joints Do not use drywall screws as they are not recommended to be used to hold the backer board in place. All of your backer board pieces should be cut before they are placed on the floor. It is important to highlight that screws shall not be installed all the way down to the floor joists.
Do I really need thinset under backer board?
Using thinset under cement board is a commonly skipped step amongst many contractors. However, many manufacturers including, both Durock and Hardiebacker not only recommend that you use thinset under their backerboard, but they specify it and will void the warranty on their product if it’s not used.
What is the difference between durock and Hardibacker?
Durock is a reliable cement product that contains glass mesh. It is the heavier of the two materials, which means it is more difficult to use and maneuver. HardieBacker is much more light, and it is also the best selling brand of cement board available. It is much cleaner because it does not have any glass in it.
What kind of thinset goes under cement board?
An unmodified thinset (Masterblend) is fine between the Hardi and the subfloor. Tara, The reason for the layer of thinset between the cement board and the subfloor is to fill the voids/gaps between the two. It’ll keep the cement board from moving up and down.
What thickness is cement board?
Cement board, technically called cementitious backer unit (CBU), is manufactured under different brand names. The standard size sheet is 3 x 5 ft. and 1/2 in. thick, weighs 45 to 60 lbs.
Do you have to tape seams on Hardibacker?
For tile backer boards such as Durock, Wonderboard, Hardiebacker, Permabase, and others the seams between the board need to be treated with 2-inch alkali-resistant mesh tape.
What thickness Hardibacker do I need?
Before you get started, you should determine if your floor is suited to HardieBacker Cement Board. That means you should have a minimum of ⅝” thick exterior grade plywood or 23/32” thick OSB with minimum exposure 1 classification.
What is the thinnest backer board for tile?
Fiber cement board is available in 1/4-inch and 1/2-inch thicknesses. The 1/4-inch-thick board is typically used on floors and countertops.
How thick is floor tile and thinset?
In most installations, a layer of thinset 3/16 to 1/8-inch thick is sufficient. Too much thinset creates a mess and inhibits proper bonding between the tile and the substrate. For most tiles, apply a layer of thinset 3/16–1/8-inch thick.
What do you do with a gap between tub and cement board?
Technically, after the tile is installed over the backer board that gap between it and the tub ledge should be filled with an ASTM C920 sealant (caulking e.g. silicone). Although some say you should have weep holes along this gap so any water behind can weep out into the tub.
Do you have to put thinset between subfloor and cement board?
If you have a concrete subfloor then you should not be contemplating installing cement board over it. Not only is thinset a critical component underneath cement board but the other critical component is the fasteners. And you won’t have the fasteners if you are trying to install it over concrete.
Is backer board required for floor tile?
Whenever you’re laying tile on a wood subfloor, you need to first install cement backer board. Backer board prevents leaks and water damage that could harm your flooring and the structure of your home. You also can’t safely install tile flooring over plywood subfloor or onto an unprotected wood floor.
How long before you can walk on backer board?
However, after you mount the backer board to the floor you simply have to seal the seams with mortar and wait until the mortar dries. This is normally 12 hours but may be up to 24 hours in some cases. After the mortar is dry the backer board is ready to receive the mortar for the tile.
Can you tile directly on subfloor?
Tile can be laid on plywood. But do not install tile directly on the plywood subfloor itself. Use an intervening layer of a sheet of thinner plywood.
What is the difference between backer board and cement board?
Cement backer board is also called cement board, and it’s the most commonly used backer board for all manner of ceramic and porcelain tiles. Made of cement and reinforced on the top and bottom with fiberglass, this waterproof backer board is generally used for tiled shower surrounds and floors in wet areas.
