Table of Contents
120 degrees Fahrenheit is the safety recommendation against scalding, but 140° is the common default setting. Most experts agree that anything below 120 degrees creates a risk for bacteria to develop inside your water heater from stagnant water, such as legionella that causes Legionnaire’s disease.
What is ideal temperature for domestic hot water?
A domestic hot water cylinder thermostat should be set at 60-65ºC. This is high enough to kill off harmful bacteria such as Legionella. If you set the thermostat much higher than this the water that comes out of the taps will be too hot and there’ll be a risk of scalding.
Is 50 degrees hot enough for hot water?
So, what is the best temperature range for your water heater? The EPA recommends 120 degrees because it’s hot enough to keep diseases at bay, it’s not hot enough to cause scalding, it will supply enough hot water for most small families and is relatively energy-efficient.
Is 130 too hot for water heater?
Professionals recommend keeping your water heater set at a temperature between 130 and 140 degrees Fahrenheit. Any higher, or lower, could actually be dangerous for you and your family. While turning the temperature up higher can result in burns, turning it lower than the recommended setting can also be dangerous.
Is 60 degrees too hot for water?
In general, hot water is 130 F (54.4 C) or above. Warm water is between 110 and 90 F (43.3 to 32.2 C). Cold water is generally between 80 and 60 F (26.7 to 15 C).
What temperature should hot water tap be UK?
In the UK, hot water at the tap should be a temperature of 50 degrees Celsius. This will prevent accidents while still allowing you to have toasty warm baths.
Is 60 degrees too hot for a shower?
Hot water inside the home is a necessary part of every day life. Water that is hotter than 60 degrees is very dangerous especially to older senior citizens and younger children too. However your water temperature can be too cold.
Should I set my water heater to AB or C?
The Department of Energy recommends setting your heater to 120 degrees Fahrenheit. That should be plenty hot enough for most uses in your home. Now, some water heater temperature controls come with settings that read “A-B-C” as opposed to numbers.
How hot should shower water be?
The optimal temperature for shower water or bath water, so that it washes away environmental dirt and bacteria, is no higher than 112 degrees Fahrenheit, Cleveland Clinic dermatologist Melissa Piliang says. Few things feel better than a hot soak on a cold day.
Is 125 to hot for a hot water heater?
What’s a safe temperature for water? On the side of most water heaters, you’ll find a warning that says water temperatures of 125 degrees Fahrenheit can cause burns or death. To be safe, the water coming out of the plumbing fixtures in a home shouldn’t be any hotter than 120 degrees.
Will 125 degree water burn you?
Studies show that a temperature of 52 degrees C (125 degrees F) can cause a full-thickness skin burn in 2 minutes and a temperature of 54 degrees C (130 degrees F) can result in a full-thickness skin burn in 30 seconds.
Can I set my water heater to 125?
If you invest in one or more thermal protection devices to protect against overly hot water, the water heater could be safely set a little higher than 125 degrees. Most water heaters don’t have a thermostat control that is calibrated in such a way that you can just dial in 125 degrees.
What water temperature is too hot for skin?
Most adults will suffer third-degree burns if exposed to 150 degree water for two seconds. Burns will also occur with a six-second exposure to 140 degree water or with a thirty second exposure to 130 degree water. Even if the temperature is 120 degrees, a five minute exposure could result in third-degree burns.
What temperature should the hot water be set at on a combi boiler?
To maximise efficiency, we recommend setting your radiator dial to 75 degrees and your hot water to 60 degrees. Once you’ve got your boiler running at the optimal temperature, you’ll want to set the timer for when you need heating the most. With a combi boiler, hot water is on demand.
What temperature should the hot water be on a combi boiler?
For a modern combi boiler, the radiator heating temperature should be set at or around 75 degrees celsius for the best efficiency and performance.
What temperature should hot water be set at combi boiler UK?
Combi boilers have controls on the unit which allow you to set the temperature of the water that will be circulating around the central heating system and out of the taps. The best setting for combi boilers is often recommended as 75°C for central heating and 60°C for domestic hot water.
Will 110 degree water burn you?
Hot Water Safety. Even though a water temperature of 110° F is ‘relatively-safe’, exposure can be painful; the human pain threshold is around 106-108° F. A child can suffer a third-degree burn in 124°F water in less than three minutes. Children and adults can be burned this badly in two seconds or sooner in 149°F water.
What is the coldest a shower can get?
If you enjoy very cold showers and can stay in there long enough to get clean and rinsed properly, then anything above 32 degrees should be fine.
