Table of Contents
What do you use to draw on a surfboard?
Paint pens are a really simple way to add color or design to your surfboard. They are especially useful if you want a more detailed design, instead of just covering your board in one color. If you’re looking for a smooth, one color, solid finish, you probably want to use spray paint.
How do you prepare a surfboard for painting?
More videos on YouTube Remove any wax on your surfboard. Scrape the wax off your surfboard. Rub with acetone. Remove wax residue with acetone. Sand. Sand your surfboard. Wipe off with wet paper towel. Wipe board with damp paper towel. Tape off “non-paint” areas. Paint. Clear coat finish. Cure.
Can I draw on my surfboard?
Yes you can draw a design with Posca Paint Pens on a new surfboard. Spray Krylon Clear Coat over the artwork to protect it from scratching off.
How do you seal Posca pens on a surfboard?
Seal: To ensure your art doesn’t rub off in the surf, a clear acrylic spray paint over the top is essential. Spray evenly over your artwork, allow it to dry for about 30 minutes and you’re good to go!.
What do you seal Posca pens with?
Fixation. Once your creation is finished and dry, apply two coats of water-based spray varnish. Hold the can about 30 cm from the surface and spray in slow circular movements. The varnish can be matte or gloss depending on the look you want.
Can surf boards be painted?
Acrylics will keep their shine for a long time, and are very water-resistant. Do not use enamel-based paints on a surfboard. These will damage your board, making it brittle and discolored. You can also use spray-paint or paint pens, but brush-on acrylic is going to be the safest option.
How do I paint my surfboard epoxy?
Epoxy surfboards have glassing features similar to standard polyurethane boards and can be painted in the same manner. Use the wax scraper and cleaner to completely remove any wax and oils left on the board’s glass. Any oils will hamper the paint job so be sure to clean the board thoroughly.
How do you paint a surfboard EPS?
You can paint directly on the foam of the shaped blank before glassing with acrylic paints or use POSCA pens to do artwork on the sanded hotcoat and seal with Krylon Acrylic Clear Coat Spray. Do not use spray paints on EPS foam as the solvents in rattle can spray paint will melt EPS.
How do you paint a surfboard with acrylic paint?
Spray on a few coats of an acrylic matte clear coat, water resistant, found in hardware stores (be sure to test spray your clear coat to ensure they mix well and doesn’t cause running). Allow 3-6 hours of dry time. Boom! You have a new board.
Are black surfboards bad?
Be warned, if you buy a black surfboard the wax WILL melt off at the first hint of sunlight (even when left face down at times). Think you’ll put more on to replace it? Not possible, it’ll be too hot and just smear whatever wax is left.
What is better epoxy or fiberglass surfboard?
Epoxy surfboards float better due to their lighter weight and the type of foam in the center. Epoxy boards are constructed from surfboard foam blanks made of EPS foam which is of a lighter weight and provides better buoyancy. Whereas traditional fiberglass surfboards are prone to dings, and cracking and erosion.
Can you sharpie a surfboard?
Sharpie Markers As we mentioned before, sharpies do make water-based paint markers, and these are a good choice if you cannot get a hold of Posca pens. If you do use the regular sharpie, be careful of the lacquer you use to finish the board.
How do you paint a decorative surfboard?
How To Paint & Decorate A Surfboard Spray Paint A Surfboard. The first thing you have to do is clean the surface you are going to paint with acetone. Get Creative With Painter’s Tape. Take It One Section At a Time. Blending Colors. Using Paint Pens. Painting A Surfboard That is Not Going To Be Surfed On. Get To Work.
How do you get sharpie off a surfboard?
Use a dry erase marker. Go over the sharpie with a dry erase and then wipe the dry erase marker off with a dry cloth.
Can you paint a surfboard after glassing?
Surfboards that have been painted after glassing can be repainted when your tastes change. One advantage of painting a surfboard after it has been glassed is that the artwork can be removed by sanding if you make a mistake or do not like the design.
How do you spray surfboard rails?
How To: Wrap Those Rails in Color Clean your board. Get all the wax off the whole thing. Sand the rails. Tape off the rails. Paint, paint, paint away. Once the paint has dried—I waited 24 hours—it’s time to apply the clearcoat. THE BEST PART! Step back and marvel at what you did.
How do I waterproof my Posca pen?
If you are using your posca pens on fabrics that will be left outdoors and exposed to the elements then you are able to use a product such as fabric guard on them to seal their waterproof properties.
How do you seal an acrylic pen?
If you wish to preserve your decorated work on these surfaces you can easily ‘seal’ it with a varnish spray to make the paint more permanent and protect it against cracking and chipping. An acrylic-based varnish such as Montana™ Gold varnish spray, available in gloss, semi-gloss and matt, is ideal for sealing.
How do you seal posca plastic pens?
To seal your Posca pen paint onto a plastic surface, simply apply your paint using the pens as explained earlier in the article and then leave it to dry on the plastic surface. Once the paint has dried you then spray your sealing agent over the plastic surface and leave the sealant to dry.
