Table of Contents
Types of Solder Buy lead-free solder that’s designed for copper water pipes; you’ll find it in the plumbing section of the store. Solder with lead is still available, but the lead can leach into your water supply, so don’t use it.
What is the best solder to use on copper pipes?
What Type of Solder is Used for Copper Pipe? Lead free solder is best for copper pipes carrying drinking water. It will be free of elements you don’t want entering your drinking water. However it will require a higher melting point than a 50/50 solder.
Can you use regular solder on copper?
Copper pipes and other copper parts can be soldered using various metals with low melting points. Traditionally, lead alloys have been used for soldering copper, but these have fallen from favor in recent years due to lead poisoning concerns. Today, copper water pipes are soldered with lead-free flux and silver alloys.
What do I need to solder a copper pipe?
The torch needed for soldering copper can be propane or MAPP gas (methylacetylene-propadiene propane). MAPP gas comes in a yellow tank and propane comes in a blue tank. MAPP gas, usually a bit more expensive, gets much hotter than propane, so heats the pipe faster.
What kind of solder should be used on water pipes?
Lead-free plumbing solders are required for use on pipes carrying drinking water, also known as potable water lines. Leaded solders are available for applications that will not come into contact with potable water, such as sheet metal repair or copper drain lines.
Why does my solder not stick to copper pipe?
If the solder is beading up or running down the pipe, you have a dirty fitting. Just as Vic says use clean fine grit sandpaper or emery cloth. Clean both surfaces, spread flux as soon as you clean them. Also clean and flux joint after you fit them together.
Do you have to use flux when soldering copper pipes?
Flux prevents the copper from oxidizing as you heat the copper with the torch. You can solder without flux, but it is really difficult! Flux is applied to both the pipe and the fitting with a handy miniature paint brush. You do not need massive amounts to be effective.
Can silver solder be used on copper?
A simple way of soldering together a piece of copper and a piece of silver is to use a technique called sweat soldering. Place your silver sheet to one side and apply a small amount of flux to the top side of your copper sheet. Make sure the area that is covered is roughly the same as the size of your silver sheet.
What kind of solder do you use for copper wire?
The best solder to use for tinning stranded copper wire is electrical-grade rosin-core solder. This is an acid-free solder that contains a flux in the core of the solder. Never use solder that contains acid, which can damage the wire or its insulation. Acid-core solder is intended for use in plumbing applications.
Do you weld copper or solder?
Metals that can be soldered include gold, silver, copper, brass, and iron. Flux is used in soldering, just as it is in brazing and welding to clean the metal surfaces and make it easy for the solder to flow over the pieces to be joined. Soldering is also used to join electrical components.
Can you solder copper pipe with a soldering iron?
You’ll need certain tools for soldering copper pipe. In addition to your supplies, proper safety gear is a must. Soldering Torch: Also called a soldering iron, the torch for this project is usually propane. It may also be a MAPP torch, which uses a gas that burns hotter than propane.
Do you need flux to solder?
Yes, solder can be used without flux. To do so, you will need something other than flux to break down the oxides on the metal surface, without which your surface may be damaged or not properly cleaned.
Can I use lead solder for plumbing?
Under the Water Fittings Regulations and Byelaws, the use of lead solder for jointing copper pipes is prohibited in plumbing systems which supply water for drinking, cooking or bathing. Solder containing lead can only be used on water installations not used for drinking, such as closed circuit central heating systems.
Can I use silver solder for plumbing?
Oatey® Silver Lead Free Plumbing Wire Solder is a silver bearing wire solder designed for plumbing and potable water line applications. Safe Flo Silver Lead Free Solder is also effective on stainless steel, brass alloys, chrome alloys, galvanized steel and cast iron piping.
Can you use electrical solder for plumbing?
Typically, electrical solder contains rosin core flux; plumbing solder uses an acid-based flux. So it’s not a good idea to use plumbing solder for electrical connections because the acid in the flux can damage the wiring and lead to connection failure.
What would causes solder not to stick?
A classic reason solder won’t stick to something is because you’re not getting it hot enough. My interns come to me with this problem all the time. Make sure the tip of the iron is nice and shiny. Touch some solder on it, and it should melt almost instantly.
Does flux help solder stick?
Flux removes oxidation from metals, and it’s crucial because solder won’t stick to oxidized metals, and metals oxidize very quickly at soldering temperatures.
What temperature should I solder at?
Make sure the surfaces to be soldered are clean. Turn on the soldering iron and set temperature above the melting point of your solder. 600°- 650°F (316°- 343°C) is a good place to start for lead-based solder and 650°- 700°F (343°- 371°C) for lead-free solder.
What is the purpose of using flux when soldering a copper pipe?
The main purpose of the flux is to prepare the metal surfaces for soldering by cleaning and removing any oxides and impurities. Oxides are formed when metal is exposed to air and may prevent the formation of good solder joints.
What does flux do in soldering copper?
In plumbing, flux is a compound used as part of soldering a pipe joint. It’s an acidic paste that is applied to the part of the copper pipe where the solder must make a bond. It cleans the joint, if you rub it on some copper and leave it a short while, it will be left gleaming when you wipe it off.
