QA

Quick Answer: What Sizes Does Drywall Come In

As you shop for drywall, you’ll find three common size options: 4 x 8-Foot Drywall: The most common and versatile of all drywall sizes. 4 x 10-Foot Drywall: Provides a smoother surface on tall walls and expansive ceilings. 4 x 12-Foot Drywall: The longest length available.

What sizes do drywall sheets come in?

Drywall comes in sheets. While the most common size is 4 x 8 feet, you can purchase much larger lengths. Use a sheet size that minimizes the number of seams that will appear in the finished product. Drywall comes in various thicknesses, 3/8 inch and 1/2 inch being the most common.

Does drywall come in 5 width?

Drywall Thickness. Common drywall thicknesses are 1/4-inch, 1/2-inch, and 5/8-inch. Building codes do have some requirements when it comes to the thickness of drywall panels.

Can you use 3/8 drywall wall?

If there is no building code requirement for ceilings in your area, you have a choice to make. The most common size used is ½ inch, although other sizes may be used for particular purposes. Yes, you can use a 3/8″ drywall for a ceiling. To prevent sagging ensure ceiling frames supporting the drywall are 16″ apart.

How much does a sheet of drywall cost?

Average Cost of Drywall by the Sheet The average price of drywall and sheetrock is $15 per four-foot by eight-foot panel. The prices can range from $12-$20 per panel depending on where you live and where you are purchasing from. This translates into a cost of about $0.40-$0.65 per square foot of drywall.

Is sheetrock better than drywall?

Drywall and sheetrock are really the same thing. Sheetrock is a brand of drywall patented by the US Gypsum Company. Both are used to make walls and ceilings. Aside from a few chemicals that allow the sheetrock formula to be patented, there is really no practical difference between drywall and sheetrock whatsoever.

Is it better to hang drywall vertical or horizontal?

On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits. Fewer seams. Horizontal hanging reduces the lineal footage of seams by about 25%.

What kind of drywall do you use in a garage?

Drywall is the easiest and most economical covering for your garage ceiling. Use 5/8-in. -thick drywall if your trusses or rafters are spaced 24 in.

What is the difference between standard and lightweight drywall?

Lightweight: Lightweight drywall is generally used the same way as standard drywall, but it’s easier to carry and hang because it’s 25% lighter. Fire-Resistant: This type of drywall normally contains chopped fiberglass in its core for extra fire resistance.

Should I sheetrock walls or ceiling first?

When hanging drywall, always hang the ceiling first. This is the hardest drywall to hang, so get a partner and go slow. Large cracks due to misaligned sheets are hard to repair because the extra mud required to fill them will constantly fall out and drop to the floor (or worse, down the back of your neck!).

What size drywall should I use in garage?

The most common drywall panel size measures 4 feet by 8 feet, and if the garage walls are 8 foot high, that’s the optimal size. If the garage walls are 9 feet high, select panels that are 54 inches wide. When installed horizontally, the panels will fit evenly, eliminating the need to cut the panels.

How far apart are studs?

The general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.

How much does it cost to drywall a 12×12 room?

Average cost to drywall a room The average cost to drywall a 12×12 room is $580 to $1,800. Drywalling a master bedroom or living room costs $850 to $3,100. Most drywall contractors charge higher rates per square foot for small jobs.

How much drywall do I need for a 10×10 room?

Estimated number of drywall sheets to buy for a certain room size Room size 1 Floor area 2 Number of drywall sheets to buy 5 Total for room 10 x 10 100 15 12 x 12 144 18 14 x 14 196 22.

Why is drywall so expensive?

There are a bunch of reasons drywall prices can rise. As with most commodities, increased demand or decreased supply can have an affect on drywall board prices. You don’t want to set up your construction loan and then find out prices have skyrocketed for the building materials.

What is the life expectancy of drywall?

Plaster and/or drywall walls and ceilings have an expected life span as long as 70 years but as short as 30 years. Water leaking in from the roof or exterior walls can greatly reduce the life of plaster and drywall and cause cracks and defects.

What goes on top drywall?

Compound. Compound, also called spackle or mud, is an important item that goes on top of drywall. After hanging and screwing drywall to wall studs, you must apply the compound to the drywall board seams using a 4-inch-wide knife.

Can you paint drywall without mudding?

Q: Can I paint directly on drywall? A: No, after you are done hanging your drywall, you need to make sure that you mud and primer it before applying any coat of paint. To top it all off, you should paint your drywall with acrylic latex paint.

What side of drywall do you score?

In most cases, drywall is cut by scoring through the paper on the finish side (the one with white paper) using a sharp drywall knife. As soon as you notice the blade dulling, turn it around or replace it.

Should drywall touch the floor?

Always leave a 1/2-inch gap at the floor. This allows for floor and wall expansion without cracking the drywall. It also helps prevents moisture wicking if the floor floods. Wear work gloves, safety goggles and a dust mask when hanging drywall.

Does drywall have to end on stud?

Yes, you need to start and stop drywall on a stud. Every edge of the sheetrock needs to be supported continuously. Cut the sheetrock down so it’s edge is in the middle of a stud. Try to put your cut edge in a corner because the factory edges are tapered so when you tape and mud it ends up flat.