Table of Contents
US Bolt Head/Wrench Size Bolt Diameter Head and Wrench Size Hex Bolt – Lag Bolt – Square Bolt Heavy Hex Bolt 1/2″ 3/4″ 7/8″ 9/16″ 13/16″ – 5/8″ 15/16″ 1-1/16″.
What size wrench fits a 1/2 inch bolt?
Hex Bolt, Lag Bolt, Square Bolt and Heavy Hex Bolt. US Bolts Bolt Diameter (in) Head and Wrench Size (in) 1/2 3/4 7/8 9/16 13/16 5/8 15/16 1 1/16.
What size nut do I need for a 1/2 bolt?
US Nut Size Table Size Diameter* Height Hex Nut Nylock Nut 1/2″ 3/4″ 19/32″ 9/16″ 7/8″ 41/64″ 5/8″ 15/16″ 3/4″.
How do I know what size wrench I need?
Take the diameter of the bolt, and multiply by 1.5. This calculation and conversion factor is valid for either metric or standard bolt sizes. The resulting number will be the size of the wrench you need to adjust the bolt properly. For example, If your bolt measures .
How do you measure a bolt head for a wrench?
Tip Insert the shank of the bolt into the holes in a bolt-sizing gauge. Locate the printed bolt size to the side of the correct hole on the gauge (for example, 1/2, 3/4 or in mm for metric bolts). Locate the socket head in the socket set that has this size printed on its side.
How much torque does a 1/2 inch bolt have?
US Recommended Bolt Torque Size Recommended Torque Grade 2 18-8 S/S 1/2″ 37 45 9/16″ 53 63 5/8″ 73 104.
What size is M18 bolt?
Dimensions for DIN931 Hex Head Bolt Diameter (d) Pitch Across Flats (s) M16 2mm 24mm M18 2.5mm 27mm M20 2.5mm 30mm M22 2.5mm 32mm.
Is 1363 a standard?
IS 1363 was originally published in 1960 and first revised in 1967. Subsequent to the publication of 1967 edition, many changes had been agreed upon at international level which have been reflec~ed in IS 1367 series of standards covering ‘Technical supply conditions for threaded steel fasteners’.
How are nuts and bolts sized?
Bolts commonly use four types of measurement, while nuts use only two. Bolts are measured in length of shank, bolt head size, width of shank (the diameter of the threaded bolt body) and the thread pitch (the size of the thread). Nuts are measured by the width of the hex shape and by their thread pitch.
What are the standard wrench sizes?
What are the wrench sizes in order? Standard Combination Wrenches: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, Metric Combination Wrenches: 4, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 36, 64,.
Is the diameter of a bolt the same as the wrench size?
When ordering a bolt you will need to determine. bolt diameter, thread pitch, and bolt length. Technician A says that the diameter of a bolt is the same as the wrench size used to remove or install the fastener.
What size socket fits a 10mm bolt?
Size Chart Bolt size Size Tolerance M6 10mm 10.24 M7 11mm 11.24 1/4″UNF 7/16″ 11.35 3/16″BSW 11.54.
How do wrench sizes work?
Spanner. The width across flats indicates the “size” of the spanner. It is imprinted on the spanners in millimeter (mm) values. Older British and current US spanners (wrenches) have inch sizes that are imprinted in intermediate sizes in fractions.
What size is m14 bolt?
Metric Hex Bolt Dimensions NOMINAL SIZE (D) BODY DIAMETER ACROSS THE FLATS m10 10.00 15.73 m12 12.00 17.73 m14 14.00 20.67 m16 16.00 23.67.
What size head is on a 1/4 bolt?
Hex Bolt Head Size Chart Diameter Head Size 1/4″ 7/16″ 5/16″ 1/2″ 3/8″ 9/16″ 7/16″ 5/8″.
What are the torque specifications?
By definition, torque refers to the amount of rotational force at the point of application. When attaching a wheel to a vehicle, torque specifications are the amount of force recommended on the hardware to ensure proper installation.
How do you torque a bolt?
Place the socket and torque wrench on the fastener and tighten the bolt, holding the torque wrench by the handle at the end of the wrench. Rotate the torque wrench slowly and smoothly, continuing through the arc until the wrench clicks. The click indicates that you have reached the desired torque.
What torque should I use for screws?
4 to 15Nm is fine for all of those smaller screw driver tasks around the home. 15 to 35Nm is a great all-rounder to drill and drive medium sizes screws and hole drilling. 35Nm upward will tackle all of those more serious project with bigger screws and holes.
What size is M18 nut?
M18 Hexagon Nuts (DIN 934) – Marine Stainless Steel (A4) Technical Specification Finish Natural Nut Width A/F (J) 27mm Nut Width A/P (P) 31.05mm Thread Pitch 2.5mm Thread Size M18 (18mm).
What size is M18 in MM?
Tap size Basic major dia (mm) Basic major dia (inch) M16 x 1.5 16mm .6299 M18 x 2.5 18mm .7087 M18 x 1.5 18mm .7087 M20 x 2.5 20mm .7874.
What is M4 screw?
They’re made from a durable carbon steel and come with a nut for tightening metal surfaces together. The M4 machine screw has a thread diameter of 4 millimetres, in simple terms the M stands for millimetres followed by the size – in this case 4 mm. 12 products. See more Screws.
Is 1363 Nut a specification?
1. IS 1363 (Part 3):2018/ISO 4034:2012 specifies the characteristics of hexagon nuts with thread size from M5 upto and including M64 of product grade C. Also nuts may be of different property classes as specified in IS 1363 (Part 3):2018/ ISO 4034:2012.
Is 1363 a bolt grade?
1. IS 1363 (Part 1):2019 /ISO 4016:2011 specifies the characteristics of Hexagon Head Bolts with thread size from M5 upto and including M64 of product grade C. Also Bolts may be of different property classes as specified in IS 1363 (Part 1): 2019 / ISO 4016:2011.
