Table of Contents
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
What size sink goes with a 30 inch vanity?
If your vanity is 30-inches wide, look for a sink no more than 22-inches long to get at least four inches of counter space per side. The maximum sink length (or diameter) you can get is 28 inches, but this will leave no usable counter space.
Will a 29 sink fit a 30 cabinet?
Another larger option, that provides more variety in its use is a 29″ double bowl sink. This sink will fit in your 30″ base and provide you with two 16×13″basins. Dividing your sink in two could be helpful for the experienced cooker or the dirty chef, providing a half sink for dirty dishes and a half for meal prep. >>.
How do I measure for undermount sink cabinets?
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36″ cabinet can accomodate a 30-32″ sink.
What size sink will fit in a 33 inch cabinet?
Most base cabinets come in widths that accommodate the standard kitchen sink sizes. A 30-inch wide or a 36-inch wide cabinet are most common. The height of the cabinet can be customized, but 36 inches is average. A typical 33-by-22-inch sink will fill a 36-inch base cabinet.
How do I choose a kitchen sink size?
Experts recommend at least 22 to 27-inches in length, which also works for small kitchens. Length is one factor, but you also have to consider the depth of the sink. Kitchen sinks should be at least 7 to 7.25 inches deep; anything less and your dishes will quickly pile up and reach the faucet.
What is standard bathroom sink size?
Sink Size and Shape Most round bathroom sink bowls are 16 to 20 inches in diameter, while most rectangular sinks are 19 to 24 inches wide and 16 to 23 inches front to back. The typical basin depth is 5 to 8 inches.
What is the standard size of a sink?
The most common sizes for a kitchen sink are 30″ or 33″, however a standard size could measure anywhere between 24″ and 36″ in length. The bulk of what you find while shopping will fall within this size range. Generally, sinks up to 30″ will contain one large single bowl.
How do you measure an undermount bathroom sink?
Measure width from side to side and length from front to back–where you measure will depend on the installation type. Be sure to refer to the specification sheet for exact dimensions. Height and depth are two separate measurements. Height is the full measure taken on the exterior from top to bottom.
What does minimum cabinet size mean for sinks?
A sink’s minimum cabinet size is a measurement indicating the least amount of under-cabinet and top counter space required for the sink to fit properly.
Is a 10 inch sink too deep?
While 10 inches has its benefits, members with relatively shorter heights may experience discomfort. Beyond this, it will be too deep for sinks unless you do not experience back strains or the kitchen has a significantly low platform.
What gauge sink is best?
Gauge. The thicker the gauge of stainless steel, the better the quality. The standard gauge for stainless steel sinks ranges from around 14 to 20, with the lower number indicating a thicker gauge of steel. A decent-quality sink should have a gauge of at least 18, while 14- to 16-gauge is even better.
How do I measure for a new undermount sink?
Measure Your Kitchen Sink If you have an undermount sink, measure from the edge of the counter opening. Measure the length of your sink by placing the edge of your tape measure on the left edge of the sink and stretching it across to the right edge. Write down the length.
What is the difference between a base cabinet and a sink base cabinet?
A base cabinet will have drawers at the top. A sink base will have drawer fronts only for decoration, but not functional.
Can you put a 33 inch sink in a 33 inch cabinet?
A 33″ cabinet is outside measurement. Figure 3/4″ wall thickness, so the inside measurement of the cabinet is 31½”. You can possible squeeze the sink in there. It will be difficult to get at the side clips.
What is the standard size of a farmhouse sink?
Farmhouse sinks measure anywhere between 20 inches to 60 inches in length with an average height of 9-10 inches.
What size of a farmhouse sink should you get for a 36 inch cabinet?
The recommended size for a 36″ base cabinet is a 33″ farmhouse sink or smaller. It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
What is the advantage of a 60/40 sink?
The pros of an offset sink (commonly referred to as 60/40 proportion) are that it gives you the flexibility of still having two compartments, but including enough space to wash pots and pans in the larger basin.
How do I choose a good sink?
5 Things You Should Consider Before Buying a Kitchen Sink Consider the material. Choose a drop-in or undermount. Select the right size. Determine if you’ll need to adjust your cabinets. Pick a side: single or double bowl?.
