Table of Contents
Spacers Size For a standard look, you should have 1/8 inch grout lines for the floor and 1/16 inch for the walls. If you are using regular sized tiles from 16 by 16 inches to 12 by 12 inches, you can go up by 3/16 inches, depending on the overall look you want.
How big should grout lines be in shower?
Regular-format tiles (up to 16-by-16 inches square) call for grout lines 1/8 inch wide for floors. Large-format tiles, 18-by-18 inches wide, require a smaller grout line (1/32 inch). In general, don’t create grout lines larger than 3/16 inch, though slate and quarry tiles can work with as much as a 1/4-inch grout line.
Which size tile spacers should I use?
Regardless of the type or style of tile (porcelain, ceramic or stone) a minimum of 3mm tile spacers should be used for floor tiles. Depending on the tile, the spacer required can go as high as 10mm. Most commonly a 5mm spacer is used, especially if you’re using indoor to outdoor tiles.
How big should grout lines be for 12×24 tile shower?
A large tile, such as 12×24”, usually requires a 3/16” grout line, so it’s best to check the manufacturer’s recommendations to see how small you can go.
How much space do you need between shower tiles?
Shower tiles should have a 1/8″ joint between their edge and backer boards or adjacent tiles. For example, if tile is being set on the main shower wall, then leave a 1/8″ expansion joint between the tile edge and adjacent backer board.
What grout is best for shower walls?
Epoxy grout is a better choice for showers, kitchen, bathrooms, and other damp areas because it is stain resistant and requires no sealing, unlike cement-based grout.
How big should a grout line be?
Grout Lines for Floor Tiles As a general rule, floor tiles should have grout lines of 1/8 inch or larger, depending on the type and size of tile. Special types, such as slate or quarry tiles, often do not have edges uniform enough to work with tight spacing.
Can you use large tiles in a shower?
You absolutely can use large tiles in your new shower! Communication with your tradespeople and planning in the early stages of your project is essential to achieving this seamless finish, that will add that designer look to your bathroom.
Can you use ceramic tiles in a shower?
While your bathroom’s ceramic tile floors will endure much more wear and tear than an ancient urn or pitcher, ceramic’s durability makes it ideal for use underfoot. You can also apply ceramic tiles to shower surrounds, backsplashes, and countertops.
How big should grout lines be for 12×12 tile?
Industry standards state that minimum grout joint width should be 1/16″ wide, but that requires that you have very precisely sized tiles and that you use a non-sanded grout. Sanded grout won’t fit into a grout joint less than 1/8″ wide.
How much space do you need between 12 inch tiles?
Instead, variations up to 1/8 inch are standard when installing 12-inch tiles in the field, which is why the normal grout joint is 1/4 inch to 3/8 inch because it helps hide these inconsistencies.
How do you lay 12×24 tile in a small bathroom?
For a much smaller space, such as the bathroom, it’s best to lay down the tiles the long way, where the longer side is set vertically. Visually, a long and narrow direction lengthens a small room.
How much space should be between tile and wall?
The Tile Council of North America recommends at least a quarter-inch gap between the tile floor and the walls. Never fill this gap with grout, because tile grout is not flexible. Instead, fill it with an elastic material capable of sustaining the movement of the floor and the movement of the wall.
How many spacers do I need?
After your first tile is laid, put a spacer on each corner of the tile (ensuring they are flush). Note: When using floor tiles it is also recommended to use two “square” spacers per side (in addition to the plus spacers on each corner). This provides additional accuracy along the length of the tile.
What is the smallest gap between tiles?
Smallest size grout lines should not be less than 1/16″. This is an acceptable space that can be properly grouted. When the space between tiles is so little like 1/32″ which is often referred to as “credit card lines” or “penny lines”, it’s not possible to fill that space all the way through the bottom of the tile.
Should sanded grout be used in a shower?
Recommended Uses Sanded grout should be your default choice for general use tiling, such as for flooring and walls. While you can use either sanded grout or unsanded grout for vertical tile such as bathroom or shower walls, unsanded grout provides a better working material.
Do I grout the corners of my shower?
In showers, the movement joints are all the corners, vertically and horizontally. Grout, which is a cement-based material, is great for filling the spaces between tiles. Nor is grout the right material for filling the corner joints on the walls. For these spaces, the right material is caulk.
How wide can a grout line be?
Finished grout lines will vary from 1/16″ to 3/16″. Note that using the smallest grout possible will increase installation time.
Should tile spacers be removed before grouting?
While things may look fine for a few weeks – or even a few months – leaving spacers in place will damage the structural integrity of the grout. Don’t grout over tile spacers. Even if you have tile spacers that are stuck, they should be pulled out, or removed with a chisel, and grout should be re-applied.
