Table of Contents
The height (thickness) of your tile dictates the size of the trim. The trim should be at or slightly lower than the edge of the tile once it is installed. For example a tile that is 3/8″ (10mm) thick should work with a 3/8″ trim.
What size tile trim to use?
To account for the use of adhesive you should choose a trim one size up from the depth of your chosen tile. For example, if your tile is 10mm thick we’d suggest a 12.5mm trim ensuring a smooth fit.
How thick should Schluter be?
ie, the Schluter “60” is designed for 6.0mm thick tile. The 125 is for 12.5mm thick tile.
Do you need to use tile edge trim?
Generally, the only time doorway trim isn’t required is when adjoining rooms are both tiled, in which case a neat grout line will do the trick. However, modern porcelain tiles with a digital printed surface, will be clay colour on exposed edges, therefore a plastic or metal trim should be used.
Can you fit tile trim after tiling?
Of course, you can, but that would bring you some trouble. First, your tiles are now stuck together with spacers to ensure uniformity. This will make it difficult for you to install the edge trims without breaking several tiles in the process. After tiling, install spacers to fill up the gap between each tile evenly.
Do you put tile trim on before tiling?
Always plan the installation of your tile trim alongside your tiles as they need to be installed in conjunction with one another.
Do you grout between tile and edge trim?
So, when trimming, it is a good idea to use grout between tiles and trim. The one you use should reflect the make of your tiles or simply that of your kitchen. Ceramic tile edges or trim profiles give off a finished square edge but are more commonly used to make a larger, bull-nose edge.
Should tile trim be flush with tiles?
Stewart. I always fix the trim securely, with a grout line. As to fitting flush it depends on the tile, I prefer to finish flush if the tile is smooth, but if it’s a rough tile, I finish to the highest point. I always use metal trims, so sharp edges are a no-no.
Does Schluter come in different sizes?
Profile size selection is based on the thickness of the tile and amount of setting material used to set the tile. With smaller format tiles, take the tile thickness and select the corresponding size profile.
How thick is subway tile?
Subway tile is by definition a rectangular, thick, low-fired, glazed ceramic tile, traditionally 3″ by 6″, though it comes in a variety of sizes for home use.
How long is tile trim?
Tile Finishing Strip is available in various lengths, typically from 1.8 to 3 metres, generally a given style is only found in one particular length.
Do you need quarter round with tile?
When your tile meets the wall or when it’s wrapping around another wall that’s perpendicular to it, we recommend using a bullnose or quarter round trim. Although not necessarily a must, a cove base trim, where one edge is slightly curved outward, can accommodate where the tile meets the floor for a smooth transition.
How do you finish tile without a bullnose?
Use a Caulked Edge (No Transition) Some tile types don’t offer a bullnose because a bullnose is not necessary. Glass tiles, tumbled stone varieties, and porcelain tiles have naturally finished edge. They do not need a separate edge piece to create a polished look. Simply install up to the edge and caulk.
Do you put baseboard over tile wall?
Over the Tile You can choose to attach your baseboard over the wall tile. If you do that, you don’t need to cut your tiles in a perfectly even shape. So, even if the edges are uneven, your baseboard will have your back.
How do you hide the edges of tile?
4 easy ways to finish tile edges Caulk the Edge. This is the easiest and most cost-effective solution. Rail Moldings. Coordinating tile moldings in natural stone and porcelain are usually readily available. Metal Edges. Metal edges are available in a wide array of styles and finishes. Create a Bullnose Edge.
What size tile trim do I need for 10mm tiles?
To select the correct depth of tile trim for your tile you should use a tile trim one size up from the depth of your tile. For example if your tile is 10mm think use a 12.5mm tile trim. This will allow for the adhesive needed to hold the trim and tile in place.
How do you finish tile edges without trimming?
Caulk the Edge To give the edge a clean, water-tight finish, place a piece of masking tape one grout joint away from the edge of the last tile. Fill this gap between the tile and the masking tape with a smooth bead of caulk. This will finish the edge without extra tiles.
Should grout lines be flush with tile?
You want it close to being flush with the tile edges; otherwise, you’ll be able to both see and feel the corners of your tile when you walk over it. A higher-level of grout is also much easier to keep clean than grout lines that fall halfway down the tile.
What is jolly edge trim?
Jolly trim is a linear trim or edge for tile. It can be ceramic or metal. It is used to finish a raw tile edge just like a bullnose tile. It can also be used as a liner to accent your design. It’s generally very narrow and long with a minimal profile, measuring about ½ x 12 x ¼.
What is Schluter trim used for?
Schluter®-SCHIENE provides effective and attractive edge protection for tile coverings that are typically bordered by carpet, at expansion joints, or as decorative edging for stairs. The profile offers a discreet, minimum reveal which is ideal for creating elegant transitions between floor coverings.
