Table of Contents
To determine the optimal width of your curtain rod, you’ll need to measure the width of your window including the frame or trim. Take this measurement three times: once at the top, once at the center, and once near the bottom of your window. These measurements will most likely vary slightly.
How do I know what size tension rod to buy?
Purchase a rod that’s longer than your measurement. As such, you should buy a rod that’s longer than what you need when fully expanded. For example, if you need to fill a 5 ft (1.5 m) space, get a rod that can expand up to 7 feet (2.1 m). Check the weight capacity of your tension rod as well.
How much weight can a tension rod handle?
Steel Tension Rod Steel tension rods hold the most amount of weight. Most of them can hold around 45 pounds. This means they can be used for just about anything. They are extremely versatile with what you can put on them.
Is a tension rod strong enough to hang clothes?
Tension rods are designed to accommodate all material weights, depending on how well you install them. Plastic and wooden tension rods may not be strong enough to hold heavy curtains or damp towels for long periods.
What size curtain do I need?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How do I keep my tension rod from falling down?
The caps on tension rods are often made of plastic, but even rubber ones are so incompressible that moist, smooth surfaces such as tile or fiberglass can’t hold them. You can fix that by gluing rubber shelf lining material to the ends with strong glue – two-part epoxy or contact cement.
How wide should blackout curtains be?
Decide what level of light-blocking you require from the drapes. To reduce light bleed from the top, bottom and sides of the drapes, they must extend past the window on all sides at least 18 inches. A window 40 inches wide and 36 inches long requires a blackout drape 76 inches wide and 72 inches long.
Can a tension rod hold plants?
The tension rod is a spring and screw system that uses, as the name implies, tension, to lodge itself between walls. It’s traditionally used for hanging curtains, clothes, and room dividers, but it also works for hanging plants.
Can a tension rod hold curtains?
You can extend the rod so that it fits as tightly as possible between the two walls. Most rods come with rubber tips on either end to protect your walls from scraping. They are very much like shower curtain rods and work under the same principle. Once you have your tension rod in place, you can hang your curtains.
Where do you use a tension rod?
7 Uses for Tension Rods You’ve Never Thought Of For Shoe Storage. As a Kitchen Utensil Holder. For Pot and Pan Storage. As a Way to Store Wrapping Paper. As a Craft Supply Solution. As a Paper Towel Holder. To Hang Bed Skirts.
Can a shower rod be used as a closet rod?
A shower curtain rod is not as strong as a regular closet rod. Hanging too many clothes on the rod is not advisable, as it may damage the rod or cause it to break. The rod should not be placed inside the closet without brackets, as the brackets will add strength and support weight.
What size curtains do I need for a 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How wide should curtains be for 60 inch window?
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
How wide should curtains be for 48 inch window?
Curtain Width Guide If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
Can you use a tension rod on drywall?
Always place a tension rod against the studs on drywall. Otherwise, the force from a tension rod can damage drywall. Do not pull or tug on the rod in an effort to separate the pieces.
Do tension shower rods work on tile?
Tension rods are well suited to fiberglass and tile showers, where you might not want to drill through the walls to mount the rod. Mounted: Straight, mounted shower curtain rods adjust to fit the space between the shower walls.
How much wider should curtains be than the window?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
How do you make blackout curtains look good?
The Best Ways to Find Blackout Curtains That Aren’t Ugly Choose light-filtering curtains rather than blackout curtains. Look for a drapey, heavy fabric. Use a double curtain rod. Sun Zero Oslo Rod Pocket 100% Blackout Window Curtain Panels $27.99 for each panel, Target. Use curtain ring clips. Majgull Blackout Curtains, IKEA.
