Table of Contents
The International Residential Code specifies 3/8-inch plywood for sheathing walls with a standard stud spacing of 16 inches, if the siding is nailed to the studs through the sheathing. If the nails penetrate the sheathing, but not the studs, the minimum plywood thickness that the IRC designates is 1/2 inch.
What size OSB should be on exterior wall?
Exterior walls Minimum thickness of wall sheathing for use on walls; 3/8″ plywood or 5/16″ OSB. If you use fibre cement siding, go with 1/2″ plywood or 7/16″ OSB for the exterior walls. The wall sheathing can be nailed or stapled (check your local building code).
Can I use 7/16 OSB for wall sheathing?
Install structural sheathing (plywood/OSB) in exterior walls to ensure the building will resist design wind pressures. Select the appropriate thickness for wood structural sheathing panels. Minimum: 7/16” thickness. (Exception: 3/8” for gable end walls structural sheathing.)Sep 27, 2020.
What are 4 types of exterior wall sheathing?
Five common structural exterior sheathing options include wood-based, gypsum, glass mat, cement board, and Barricade® Thermo-Brace®. Plywood sheathing is made from whole sheets of wood that are cross-laminated, which give the boards strength and stiffness.
What is the best plywood for exterior walls?
Structural Fiberboard Plywood and OSB are largely considered the best wall sheathing choices because of their overall abilities to hold fasteners well, create a strong bond between studs, and provide some thermal advantages. The “big two” aren’t the only selections available however.
What is the typical wall sheathing thickness?
In general, sheathing thickness varies according to the spacing between studs. Sheathing 5/16-inch thick is usually the minimum for studs that are spaced every 16 inches and sheathing 3/8-inch thick is usually the minimum for walls with studs spaced every 24 inches.
Which is better for outside walls plywood or OSB?
OSB and plywood offer similar (and sufficient) performance in terms of strength and functionality, though plywood is about 7% stronger. Plywood will absorb moisture quicker than OSB, but consequently it will also dry quicker.
How thick should plywood be for exterior walls?
Minimum Plywood Thickness The International Residential Code specifies 3/8-inch plywood for sheathing walls with a standard stud spacing of 16 inches, if the siding is nailed to the studs through the sheathing.
Can you use 1/4 plywood walls?
Any good, solid 1/4 plywood will be fine for the walls.
Can 7/16 OSB span 24 inches?
Wall panels 7/16 Category may be used on studs spaced up to 24” o.c. LP OSB sheathing panels are designed for use in roof, wall and subfloor systems in commercial and residential projects, maintenance, remodeling or new construction. OSB sheathing panels comply with the following industry standards and certifications.
Is exterior sheathing waterproof?
Exterior wall panels are the best sheathing options you can choose. Because they are cheap, waterproof and beautiful. It does no matter if the wall you want to cover is horizontal or vertical. With them, all types of walls can be covered.
What sheathing should I use?
Builders generally use 8d common nails, which are approximately 2 ½ inches long and 131/1000 inch wide in diameter. The nails should be spaced no more than 6 inches apart and attached 3/8 inch from the sheathing panel ends and edges, according to the Engineered Wood Association.
Can you use 1/4 OSB for walls?
OSB wall sheathing comes in thicknesses ranging from 1/4 inch to 1 1/8 inch, but some of those dimensions are hard to find. Building codes in some areas require that the best OSB for walls is 1/2 inch thick if stucco will be applied.
What is exterior grade sheathing?
Exterior Gypsum Sheathing is a water-resistant product designed for attachment to exterior side-wall framing as an underlayment for various exterior siding materials such as wood, metal or vinyl siding, masonry veneer, stucco, shingles, etc.
Is sheathing plywood exterior grade?
CDX is the most common exterior plywood grade. Oriented strand board (OSB) is an engineered plywood substitute that many builders use for sheathing and roof decking. It’s constructed with waterproof glue and performs best when only semi-exposed to the elements, as it is when covered with siding or roofing.
What material is used for exterior walls?
Polyvinyl chloride (PVC), commonly known as vinyl, is probably the most popular material used for exterior wall siding on homes and other residential applications. It’s one of the lowest cost options for exterior wall siding and comes in plenty of styles, colors, and patterns.
What size is 19 32 plywood?
Sheathing Plywood (Common: 19/32 in. x 4 ft. x 8 ft.; Actual: 0.563 in. x 48 in.
What is CDX plywood used for?
CDX Plywood is used primarily by contractors to build exterior walls and roofs. CDX plywood has one side veneer grade “C” and one side veneer grade “D”. The two are bonded together with glue which can withstand a little moisture. The APA would recognize CDX Grade Plywood as C-D Exposure 1 plywood.
Is 7/16 OSB OK for roofing?
Standard types of wood designed for roof sheathing are oriented strand board, known as OSB, and plywood, the most popular being OSB. Sheets of 7/16-inch thick, without edge support, can be used in an area where the snow load is 30 pounds per square foot.
How thick should OSB be for garage walls?
Note: IBC & IRC require a minimum thickness of ⅜” for OSB for wall sheathing.
How thick is exterior plywood?
PLYWOOD – EXTERIOR PLYWOOD Thickness Size Cut 1/2″ 4′ x 8′ Fir 15/32 5/8″ 4′ x 8′ Fir 19/32 3/4″ 4′ x 8′ Fir 23/32 1″ 4′ x 8” Radiata Pine 31/32.
