Table of Contents
Some older sinks may have drains that connect to a 1 1/4-inch tailpiece, but most modern drains have a 1 1/2-inch outlet. All the pipes that connect to the tailpiece, including the P-trap assembly and all the horizontal extensions, are either 1 1/4 or 1 1/2 inches in diameter.
How big should a sink drain pipe be?
So the drain line is usually 1 1/2 inches in diameter. This size drain line is sufficient for kitchen use. A bathroom sink drain line is typically 1 1/4 inches, slightly smaller. Some kitchen sinks experiencing very light use may use this size drain, but it is not recommended.
What size is bathroom sink drain pipe?
The standard size for a bathroom sink drain pipe is 1.25 inches in diameter. However, this is determined based on your state’s housing code, and you may find that they suggest 1.5 inches or 1.65 inches in diameter, and your home has been built with this plumbing standard.
What pipes do I need for a kitchen sink?
Kitchen drains are usually 1 1/2 inch in diameter, rather than the 1 1/4-inch pipes often found in bathroom sinks, so make sure you buy the right size. Occasionally, you may find a 2-inch kitchen drain outlet. If so, there are adapter fittings that can transition a 1 1/2 drain kit to the 2-inch outlet pipe.
What size is main drain line?
Sewer drains from laundry sinks or washing machines are 2 inches in diameter and those from sinks in the kitchen, bathroom or powder room generally use a 1.5-inch pipe. The main sewer pipe leading to the septic tank or public sewer is usually 4 inches.
What size is standard drain pipe?
Most modern drains have a 1 1/2 inch outlet, but older sinks may have drains that connect to a 1 1/2 inch tailpiece. All the pipes that connect to the tailpiece are either 1 1/2 or 1 1/2 inches in diameter.
What size is a bathroom sink trap?
Traps come in 1-1/4 inch (standard bathroom sink) or 1-1/2 inch (standard kitchen sink) inside diameter sizes. Be sure to check so you get the right size replacement at your local store.
What size pipe is used for bathtub drain?
The proper size for both a bathtub drain and trap is 1 1/2 inches in diameter, regardless of the bathtub size.
How do you measure a sink drain pipe?
Measure from the wall where the house drain pipe is to the nut securing the J trap to the sink drain pipe with a tape measure. Add two inches to the measurement and write it down on a piece of paper. This is the measurement for the rear sink drain pipe.
Should I use 3 or 4-inch drain pipe?
Waste drain pipes for toilets in modern plumbing systems are either 3 inches or 4 inches in diameter. The wider the pipe, the more waste it can move and the less likely it will be to clog. A 4-inch pipe can carry about twice the waste of a 3-inch pipe.
What size should plumbing pipes be?
In most cases, the main pipeline from the street to your home is either 3/4 or 1 inch in diameter, supply branches use 3/4-inch-diameter pipe, and pipes for individual components are 1/2 inch. Remember that water pressure decreases by a half-pound per square inch for every foot pipes extend above your water supply.
Should I use 3 or 4 sewer pipe?
A 3-inch pipe is what’s used in homes to pipe toilets. The 4-inch pipe is used as the building drain under floors or in crawlspaces to transport all the wastewater from a home out to the septic tank or sewer. The 4-inch pipe may also be used in a home if it’s capturing two or more bathrooms.
How long can a sink drain pipe be?
Maximum Distance According to the International Residential Code, the maximum vertical distance between the sink drain and the entrance to the p-trap is 24 inches.
What size are sink traps?
Generally, the following types of appliances use a standard size waste trap and waste pipework: Wash hand basins: 32mm (1 ¼ inch). Sinks: 38mm (1 ½ inch). Urinals: 38mm (1 ½ inch), or 50mm (2 inch).
How do I know what size P-trap I need?
If you have 2.5 inches from the bottom of the tailpiece to shelf and 0.5 inches from the drain to shelf you can use CP-trap. First you have to cut 2.5-2.0 inches from the end of the tailpiece. The height of the p-trap is 4.5 inches 5-2.5=2.5 inches or 4.5-2.5=2.0 inches.
Are all pop up drains the same size?
Most drain openings are 1 1/4 inches, although 1 1/2 inches and 1 5/8 inches are also common sizes.
Can I use 1.5 inch pipe for shower drain?
Current plumbing codes (IPC as well as MA Plumbing Code 248 CMR 10 for instance) need 1.5 inches to drain for a tub with a shower. The tub can drain at leisure and the shower function when in utilize, with flow-limiting showerheads, fall within the flow rate that a 1.5” drain can handle.
What size pipe should a shower drain be?
Keep in mind that shower drain assemblies are generally made to fit a 2-inch drainpipe, not the 1 1/2-inch pipe usually found on tubs. A 2-inch pipe is the recommended size because showers have a low threshold for flooding, and a 2-inch pipe helps the water drain faster than does a 1 1/2-inch pipe.
