Table of Contents
Paint both sides of the wooden ornament white. While the paint dries, print your photos in 3.5″x5″ size on regular copy paper. Once the paint is completely dry, trace the ornament onto the photo. Be sure to center the photo the way you want it to appear on your finished ornament.
How do you put a picture on a wooden ornament?
Using a foam brush, apply a layer of Mod Podge on the disc. Then, place your picture onto the wood disc. Once you are happy with the placement, apply another layer of Mod Podge over the picture. Allow the first layer of Mod Podge to dry; then give it another coat.
Can you make an ornament from a picture?
Cut a hole (it can be any shape) in one piece of the craft paper that is just smaller than the photo. Tape the photo over the opening. Use sticker numbers or cut out numbers from craft paper and glue them to the paper below the picture. Run the ornament through a laminator; round edges.
Can you Mod Podge actual photos on wood?
Well, Mod Podge has the answer! Transferring a photo onto just about any surface such as wood, metal, glass, terra cotta and even fabric is so easy to do using Mod Podge Photo Transfer Medium! Take a look at the photo below, it was transferred onto an inexpensive wood plaque and now is preserved for years to come!Apr 14, 2015.
What size photo do I need for an ornament?
You will need clear plastic (or glass) ornaments, floor polish, glitter and some 2 inch photos that you have printed on REGULAR printer paper with LASER jet ink.
How do you Mod Podge a real photo?
Mod Podge Photo Transfer – Direct-to-Surface Technique Start by creating a photocopy of your picture using a dry toner powdered copier and cut it to size. Next, apply a thick layer of Mod Podge Photo Transfer Medium to image side of copy. Place on to surface face down. Allow to dry 24 hours.
What kind of Mod Podge should I use for pictures on wood?
Choose your Mod Podge. If you want the image to be opaque, without the wood grain showing through, you must use Mod Podge Photo Transfer Medium. If you want the image to be translucent with the wood grain showing through, use regular, matte Pod Podge.
What is the best glue to stick paper to wood?
Tacky glue is an extra thick type of glue that is perfect for adhering paper to wood. It’s sometimes called PVA glue. This type is the best choice because other watery glues will make the paper bubble up. Take a container of glue and squeeze it onto the wood in lines.
How do you glue a picture to wood with Elmer’s glue?
Pour 1/2 cup of Elmer’s Glue-All into the disposable bowl. Paint a smooth layer of Elmer’s Glue-All onto the surface of the wood with the foam brush. Trim the card stock with scissors so that the printed image can lie perfectly flat on the wood.
Will Elmers Glue work on pictures?
Although hot glue is strong and its adhesiveness will last for years, the heat and acidity can harm your photos. You also want to avoid using Elmer’s Glue or rubber cement on your photos. Instead, consider using scrapbooking glue dots. Glue dots are double-sided adhesives that will bond with almost any surface.
How do you put pictures on acrylic ornaments?
How to Make Photo Ornaments: STEP 1 – Print Photos on Laser Printer. STEP 2 – Prep and Paint Ornament. STEP 3 – Apply Photo Transfer to Printed Picture. STEP 4 – Place Printed Paper on Ornament Surface. STEP 5 – Allow to Dry. STEP 6 – Remove Paper. STEP 7 – Apply a Top Coat of Rustoleum Photo Transfer.
How do I print an image in transparent paper?
Click on “file” then “print” then click on “printer properties”, and change the paper type to transparency. Change the printer to manual feed. Transparency film is non-absorbent. It is very important to change the paper type to avoid the printer dispensing too much ink that will cause smearing of the picture.
How do you make Mod Podge glitter ornaments?
Step 1: Pour Mod Podge in ornament using funnel. Step 2: Pour excess Mod Podge back into container and wash funnel. Step 3: Pour a generous amount of glitter into the ornament. Step 4: Cover top of ornament with finger, or seal with tape, and shake, shake, shake.
Can I use Mod Podge on printed paper?
Regular printer paper is best because it doesn’t have a coating on it. Spray both sides of the paper with clear acrylic sealer (several coats) and let it dry. Paint with a thin layer of Mod Podge on both sides, then let it dry.
Can you decoupage over photos?
You can decoupage photographs onto any smooth surface that glue adheres to. Decoupage glue, available from craft stores, doesn’t damage the photos or cause the colors to run. It provides a clear protective coating that seals the photographs against damage.
Is Modge podge safe for photos?
I don’t use mod podge alot. BUT I know alot of people to do use it on top of their pictures ALL the time.. so yes it is safe!!! yes, you can use it over a photo- just be sure it’s either laser printed or color copy or store printed. If you used an inkjet printer it MAY smear the ink when it gets wet.
What kind of paper do you use to transfer pictures to wood?
Quick Reference Directions: Cut sheets of waxed paper to the size of computer paper. Print your image onto the waxed paper with any Inkjet printer. Carefully place the image on your wood (wet side down) and then rub over it with a credit card. Removed waxed paper and the ink is now transferred to the wood.
What do I need to transfer a picture to wood?
DIY Photo Transfer to Wood 1/4″ plywood cut to 13 x 8. Mod Podge Photo Transfer Medium. Matte Mod Podge. Folk Art Milk Paint: Plymouth Rock. Foam Brush. Damp rag. Image printed on regular paper using a laser printer or photocopier. Sharp craft knife.
How do you attach paper to wood?
To glue one sheet of paper over an entire surface on a piece of wood, such as the top of a box, apply the glue to the wood instead. Smooth the glue into a thin layer with the foam brush, then press the paper onto the wood in the desired location, smoothing the piece down gently with your hands.
