Table of Contents
OSB used for wall sheathing should be 7/16 inch thick.
What size OSB should be on exterior wall?
Exterior walls Minimum thickness of wall sheathing for use on walls; 3/8″ plywood or 5/16″ OSB. If you use fibre cement siding, go with 1/2″ plywood or 7/16″ OSB for the exterior walls. The wall sheathing can be nailed or stapled (check your local building code).
Can I use 7/16 OSB for wall sheathing?
Install structural sheathing (plywood/OSB) in exterior walls to ensure the building will resist design wind pressures. Select the appropriate thickness for wood structural sheathing panels. Minimum: 7/16” thickness. (Exception: 3/8” for gable end walls structural sheathing.)Sep 27, 2020.
How thick OSB do I need?
The recommended minimum thickness of OSB panels for timber-frame walls is 12mm when the cells in the supporting frame measure up to 62.5cm on a side, and 15mm for frame members spaced up to 83.3cm apart.
How thick should house sheathing be?
The International Residential Code specifies 3/8-inch plywood for sheathing walls with a standard stud spacing of 16 inches, if the siding is nailed to the studs through the sheathing. If the nails penetrate the sheathing, but not the studs, the minimum plywood thickness that the IRC designates is 1/2 inch.
Can you use 1/4 plywood walls?
Any good, solid 1/4 plywood will be fine for the walls.
Should OSB be installed vertically or horizontally?
If the height of a wall is less than 8-feet, install the plywood (or OSB) vertically. If the height of a wall is greater then 8-feet, install the plywood (or OSB) horizontally.
Can I use OSB for interior garage walls?
OSB is a effective sheathing material for garage walls. It’s strong and durable, and it can be used as a base for nailing or stapling insulation to garage walls. OSB can be left uncovered for utilitarian bare-wall constructions, but can be primed and painted.
Can 7/16 OSB span 24 inches?
Wall panels 7/16 Category may be used on studs spaced up to 24” o.c. LP OSB sheathing panels are designed for use in roof, wall and subfloor systems in commercial and residential projects, maintenance, remodeling or new construction. OSB sheathing panels comply with the following industry standards and certifications.
Can you use screws on OSB?
You only need a #8 wood screw that is 1 1/2 inches long for 5/8 inch OSB or at most 2 inches long for 3/4 inch plywood. Also, deck screws have a coating that helps protect the screw from exterior exposure, which is not needed indoors. Deck screws will also cost more than the screws needed for your subflooring.
Which is stronger OSB or plywood?
OSB and plywood offer similar (and sufficient) performance in terms of strength and functionality, though plywood is about 7% stronger. Plywood will absorb moisture quicker than OSB, but consequently it will also dry quicker.
Can I use OSB for shed walls?
Using Oriented Strand Board is a tested way of reducing costs for building your shed. Plywood with similar properties currently costs about 30% more for an equivalent thickness.
Is OSB OK for shed walls?
OSB can be used for exterior shed walls but needs to be covered or sealed soon after installation. It takes longer to get wet but also takes longer to dry than plywood. It is resistant to moisture and rot.
What can I use for wall sheathing?
Plywood and OSB are largely considered the best wall sheathing choices because of their overall abilities to hold fasteners well, create a strong bond between studs, and provide some thermal advantages.
What size plywood should I use for interior walls?
3-ply is one of the most common types of plywood. It is about 2- to 3-millimeters thick and is generally used indoors, since it looks more decorative than thicker plywood boards.
What is the distance between studs in a wall?
The general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.
What thickness plywood should I use for walls?
Using ½” thick plywood for walls is standard, although the International Residential Code specifies only 3/8” wall sheathing when studs are spaced 16” apart and the siding is attached to the studs and not just the plywood. For buildings with siding attached only to the sheathing, the IRC requires ½” plywood.
Can I use plywood for interior walls?
You can use plywood instead of drywall for walls and ceilings. Plywood weighs less, and it’s also stronger and more damage-resistant than drywall. Construction-grade plywood is more expensive, though, and it might not meet local building codes as it isn’t as soundproof or fireproof as drywall.
Is plywood walls cheaper than drywall?
Drywall is cheaper than plywood – Most wood materials are expensive. Fixing drywall is also a lot cheaper and less time consuming than plywood. Drywall is slightly less durable than plywood, but that is reflected in the cost of the material as well.
Do 9 foot walls need blocking?
2, state that fire blocking is required vertically at the ceiling and floor levels and horizontally at intervals not exceeding 10 feet.
