Table of Contents
Exterior walls Minimum thickness of wall sheathing for use on walls; 3/8″ plywood or 5/16″ OSB. If you use fibre cement siding, go with 1/2″ plywood or 7/16″ OSB for the exterior walls. The wall sheathing can be nailed or stapled (check your local building code).
Can I use 7/16 OSB for wall sheathing?
Install structural sheathing (plywood/OSB) in exterior walls to ensure the building will resist design wind pressures. Select the appropriate thickness for wood structural sheathing panels. Minimum: 7/16” thickness. (Exception: 3/8” for gable end walls structural sheathing.)Sep 27, 2020.
What type of sheathing is used for exterior walls?
There are many exterior wall sheathing options available, with wood sheathing being one of the most commonly used materials. Wood sheathing materials include plywood, oriented strand board (OSB), and waferboard. Plywood is made of whole sheets of wood that are cross-laminated.
What are 4 types of exterior wall sheathing?
Five common structural exterior sheathing options include wood-based, gypsum, glass mat, cement board, and Barricade® Thermo-Brace®. Plywood sheathing is made from whole sheets of wood that are cross-laminated, which give the boards strength and stiffness.
Can I use OSB for exterior?
OSB is highly resistant to moisture and can be water and weatherproofed for exterior use using good quality paint or stain. It has superior strength to other wood panels and a slower rate of moisture absorption.
What can I use for exterior walls?
Here are some of those exterior wall sheathing options and how they affect your house as a whole. Oriented-Strand Board (OSB) Plywood. Structural Fiberboard. Diagonal Tongue & Groove. Foam Board.
Can 7/16 OSB span 24 inches?
Wall panels 7/16 Category may be used on studs spaced up to 24” o.c. LP OSB sheathing panels are designed for use in roof, wall and subfloor systems in commercial and residential projects, maintenance, remodeling or new construction. OSB sheathing panels comply with the following industry standards and certifications.
How thick should plywood be for exterior walls?
Minimum Plywood Thickness The International Residential Code specifies 3/8-inch plywood for sheathing walls with a standard stud spacing of 16 inches, if the siding is nailed to the studs through the sheathing.
Do I need OSB under siding?
It is completely okay if you were not aware that there’s no sheathing under siding until you removed it. Sheathing works as a case or cover, structural support, insulator, and more. Missing sheathing is not any structural defect. It’s possible that it was not added to the construction plan.
How do I build an exterior wall?
How to Build an Exterior Wall Start by outlining your wall in chalk, directly on the slab or subfloor. Mark your top and bottom sill plates for studs. Using a chop saw or similar tool, cut your wall studs out of 2×4 or 2×6 lumber. Cut a corner post for each end of the wall.
How do you find studs in an exterior wall?
Use a good quality stud finder or rap firmly on the wall and listen for a solid sound, indicating a stud is beneath. You can also check base molding or crown molding for filled nail holes, which indicate stud location. Another clue is the location of outlets and switch boxes because one side should connect to a stud.
Is OSB better than plywood?
Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists. However, nail-holding ability controls performance in shear wall applications.
What is exterior grade OSB?
Exterior rated sheathings have a fully waterproof bond and are designed for applications subject to exposure to the weather or to moisture for its entire service life. SIPs are not to be used in applications where they will be used for permanent exposure to the weather.
Can OSB 3 board be used outside?
OSB can be used for outside applications. However, those OSB boards are classified as class 3 and they are appropriate for use in humid conditions. Even if you buy OSB that is waterproof from the market, you should apply an additional layer of waterproofing for protecting the board from moisture or water.
What board is good for outside?
Oriented strand board (OSB) is far superior to particle board for exterior use. It is even gaining a foothold in the siding industry against Jame Hardie’s cement fiber board composite siding, with less warrantee problems, lighter weight, and longer lengths of siding boards.
Can I use plywood for exterior siding?
Exterior Siding Panels Plywood siding goes up fast because it comes in large sheets. Relatively inexpensive, plywood is a favored budget siding choice. Home-grade exterior plywood siding has a rough sawn, textured appearance, and its edges are ship-lapped to allow for a tight fit.
What does OSB 24 16 mean?
The span rating on SHEATHING SPAN panels appears as two numbers separated by a slash (e.g., 32/16 or 48/24). The first number is the maximum on center (o.c.) support spacing in inches for roof sheathing. The second number is the maximum o.c. support spacing when the panel is used for subflooring.
Why is OSB painted green?
A story on green building in Saturday’s Home & Real Estate section states that it is a green product because it conserves forest resources by using wood chips that otherwise would be wasted. “The production process uses a maximum amount of wood fiber from each tree harvested, making better use of our forest resources.”Jan 26, 2007.
How Far Can 3/4 OSB span?
Span is permitted to be 24 inches on center where 3/4-inch wood strip flooring is installed at right angles to joist. Span is permitted to be 24 inches on center for floors where 11/2 inches of cellular or lightweight concrete is applied over the panels.
