Table of Contents
Ceilings and Drywall – Medium 3/8″ nap roller covers work best. Walls, Wood, and Metal – Small 1/4″ nap roller covers or foam rollers will produce the smoothest finish. Light to Medium Textured Surfaces – Microfiber rollers are best. Smooth Surfaces – Use a white woven short nap roller for an ultra fine finish.
How thick should a nap roller be?
The nap is determined by the surface texture to be painted: 1/4-inch, 3/16-inch: For very smooth surfaces like metal doors and plaster. 3/8-inch, 1/2-inch: For smooth and semi-smooth surfaces like drywall. 3/4-inch: For semi-rough surfaces like wood or a textured ceiling.
What is the best roller nap for walls?
¼-inch nap is best for very smooth walls, ceilings, cabinetry, and other surfaces without texture, including metal. ⅜-inch nap is good for lightly textured surfaces, including most interior walls. ½-inch nap is a good length for moderately textured walls, paneling, and painted brick or concrete.
What is considered a heavy nap roller?
20mm NAP. Rough and Textured Surface Rollers have a thick 20mm nap, and are specifically designed to paint rough surfaces like bagged brick, render or brickwork itself.
What is the best nap size for painting walls?
Ceilings and Drywall – Medium 3/8″ nap roller covers work best. Walls, Wood, and Metal – Small 1/4″ nap roller covers or foam rollers will produce the smoothest finish. Light to Medium Textured Surfaces – Microfiber rollers are best.
Are Purdy rollers good?
Best Overall: Purdy White Dove Woven Roller Cover ⅜-Inch Nap You’ll get top-notch results, even if you are new to DIY painting. It’s truly a multi-purpose roller cover. Use this roller cover with any latex or oil-based paint, stain, varnish, or sealer over walls, doors, trim, cabinets, ceilings, floors, even metal.
Do you cut in before or after rolling?
You’ll need to “cut-in” the corners and areas around trim with a paintbrush. Cut in the corners before you roll paint on the main surfaces. This means painting both sides of each corner starting about two brush lengths away and painting in to the corner. Use a 2- or 3-inch brush for paints.
Will a thick nap roller to hide imperfections?
A thick nap roller will hide imperfections but it will not fill any holes. Rollers are made to cover a large area in one stroke so they will miss some places where you will have to touch it up with a brush.
What is a 3/8 nap roller?
3/8-inch nap for smooth to light-textured walls. 1/2-inch nap for most walls and medium rough surfaces, such as textured plaster, and concrete. 3/4-inch nap for rough surfaces, such as textured walls and ceilings, textured plaster, and concrete. 3/8- or 1/2-inch nap is a good general-purpose roller cover.
Does a good paint roller make a difference?
There’s no doubt that paint rollers make painting easier. They spread paint faster than a paintbrush and are far less messy than using a spray system. The main difference between paint rollers is the pile or nap (thickness and length of material that covers the roller), as well as the material used for the nap.
Are knit or woven rollers better?
Knit roller covers can pick up and release higher amounts of paint than woven fabrics because the fibers have a looped backing with a single pass-through process resulting in a more “open” fabric. You can achieve spray-like results with both of these roller covers when applying any type of paint, varnish, or enamel.
What nap do I use for textured walls?
Here are the best naps for textured walls: ¾-inch nap: This is ideal for working with medium-textured or rough walls. ⅜-inch nap: This is best for medium-textured surfaces, like drywall.
Are foam paint rollers good?
Foam rollers tend to last a shorter period of time than traditional rollers. They are excellent tools for a painter who does not perform painting jobs on a routine basis. If you are someone who only paints a room every few years, foam rollers are ideal for you.
How do I get a smooth finish with a paint roller?
Start at one end, running the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded.
What is the smallest nap roller?
Paint Roller Naps – Which One Should I Use? 3/16-inch or ¼-inch. These are usually the shortest naps available and tend to look very compact and flat. 3/8-inch or ½-inch. ¾-inch or 1-inch. 1 ¼-inch or 1 ½-inch.
What rollers do professional painters use?
Which is the Best Paint Roller to Use? PRODEC 9″ Trade Professional Medium Pile Roller Kit. Hynec Ultimate Paint Roller Set. Harris Walls & Ceilings Essentials. Wickes Professional Roller on an Extendable Pole. ProDec Twin Head Masonry Kit. Harris Powercoat Paint Roller.
Do you paint the ceiling or walls first?
The ceiling should always be painted first. This allows you to effectively cover the surface with at least two coats while not having to worry about any over-spray (the effect of excess paint being sprayed onto the walls) by the roller. When painting the ceiling, you should always use a roller with a double arm frame.
Is Wooster better than Purdy?
Purdy and Wooster both have their own qualities. For instance, Purdy are more durable, strong with a good grip. Whereas, Wooster are flexible, have better coverage with a smoother finish. But unfortunately the bristles are weak and not as durable.
What’s a weenie roller?
Crowder Painting answered. A weenie roller is a thin roller, typically 1 inch across that is available in various lengths up to 6 inches. A weenie roller isn’t intended to replace a regular paint roller when applying primer or paint to large areas like ceilings or walls.
What is the best roller for semi gloss paint?
3/16 to 1/4-inch thickness is perfect for smooth surface roller covers for painting metal doors, interior doors, trim and cabinets. They work well with semi-gloss or gloss coatings and both oil- and water-base enamels. 3/8 to 1/2-inch thickness is preferable for semi-smooth surfaces such as drywall.
