Table of Contents
If you’re wondering “Which nails should I use for shoe molding?” the answer is 2″ brad nails for the nail gun. Try to find smaller finishing nails for your hammer so they’re not so noticeable on the shoe molding.
Can you use 16 gauge nails for quarter round?
If you’re doing lighter molding, such as quarter-round at the bottom of your wall, or installing a chair rail, an 18 Gauge Brad Nailer is fine for the job. Some DIY users recommend the 16 gauge finish nailer as the most versatile option.
What kind of nail gun do I need for shoe molding?
Brad nailers use smaller 18-gauge nails up to 2 inches long. Because the nails are thinner in cross section, they leave a smaller hole and are less likely to split narrow trim and molding, making them a good choice for stop and cove moldings or baseboard shoe molding.
What nails do I use for quarter round?
Attaching Quarter Round Because it’s finish trim, install quarter round with finish nails, which have smaller heads than standard nails. A finish nail gun, fitted with 1.5- or 2-inch finish nails, works well. You can also drive finish nails the old-fashioned way — with a hammer.
What size nails do you use for baseboards?
As we discussed earlier with nail guns – the best baseboard nails are probably going to be 6d (2”) or 8d (2.5” for baseboard). These can easily accommodate 15 gauge or 16 gauge nails, giving you a long, durable nail for thick baseboards and studs.
Is shoe molding the same as quarter round?
Quarter round is another moulding style typically paired with baseboards to cover up gaps and imperfections between the base and the floor. As such, it essentially has the same purpose as shoe moulding. However, this style of moulding is always shaped like a quarter of a circle, hence the name.
Which is bigger 15 gauge or 18 gauge?
The difference between them is the gauge nail that they shoot. The most common and readily available types are 15 gauge, 16 gauge, 18 gauge, and 23 gauge. The higher the number, the thinner the nail and the smaller the hole.
What is the difference between a brad nail and a finish nail?
Finish nails, or finishing nails, are generally made of 15- or 16-gauge steel wire, making them slightly thicker in diameter than brad nails. The added thickness means that finishing nails create a stronger hold than brads. The greater diameter of finish nails leaves a wider hole after fastening a piece of wood.
Can I use 18 gauge nails for trim?
18-gauge brad nailer It’s perfect for standard trim, furniture making and odd jobs around the shop. Models that shoot brads up to 1-1/4- in.
What are 15 gauge nails used for?
15-gauge – For the outer nail on casing (through drywall) and for base trim or other large trim , and sturdy install of door jambs, particularly heavy, solid-core doors. Non-structural interior applications such as crown molding, door casings or chair rail offer the most choice in the tools and fasteners you use.
Can I use brad nails for quarter round?
What Size Brad Nails For Quarter Round? Most quarter round is installed with finish nails. To avoid having to use putty to fill in holes, some professionals do use brad nails. To install quarter round, use nails that are 1 1/4 to 2 inches in length, depending on the thickness of the material.
Should I nail or glue quarter round?
A: Quarter-round should be nailed to the base boards only. It is intended to hide gaps between the base and floor. It should also permit a little movement in the flooring. Plus, it absorbs the impact of feet and furniture legs, so you may want to replace it sometime—thus, don’t glue it.
Can you use 23 gauge nails for baseboards?
In most cases, you wouldn’t use a 23 gauge pinner for baseboards. The nails it can handle are simply too short and thin to do the job. This type of nailer works best for attaching little parts for a small wood project.
What size nailer do I need for trim?
15-gauge nails are most often used for installing thick trim. 18-gauge and higher-gauge nail guns are best used for fine detail work, furniture repair and thin trim work.
Can I use brad nails for baseboard?
You can use a brad nailer to attach baseboards to the wall, though sometimes a finishing nailer might be best. Brad nails are smaller and thinner, ideal for delicate pieces of trim. Finish nails are thicker and have a stronger grip, typically the better choice for tall and long pieces of a baseboard.
How do you attach shoe molding without nails?
Apply two thin beads of liquid floor adhesive to the sanded side of the quarter-round molding. Align the molding against the baseboard and press it against the wood. Hold the quarter round in place for about one minute to allow the materials to form a bond.
Do you have to install shoe molding?
You don’t need it. You can have the contractor install the baseboards first (obviously) and then look at it and see what you think. Really, who’s going to be inspecting your baseboards anyway? Shoe mold in a new build is for aesthetic purposes only, and a personal preference.
What side of shoe molding goes on the floor?
Also known as “base shoe,” shoe molding is a decorative detail that consists of a thin strip of wood that’s either painted or stained to match the trim, and it fits in the right angle created by the floor and baseboard.
