Table of Contents
What size motor can I put on a 12 foot Jon boat?
12 foot – 10 – 15 hp motor. 14 foot -15 hp motor. 16 foot – 15 – 20 hp motor. 18 foot – 18 – 20 hp motor.
How much horsepower do I need for a 12 foot boat?
Maximum Horsepower For example, a twelve-foot boat with a four-foot transom width translates into a maximum engine size of fifteen horsepower.
How much horsepower do you need for a Jon boat?
Generally speaking, a 3 HP motor is the more desirable engine for these jon boats although some models can take up to 5 HP. A 3 HP engine would have a 5mph top speed while 5 HP engines can have up to 10mph. These boats can do for light fishing or transport across small distances.
How much weight can a 12ft Jon boat handle?
As boat length increases the weight capacity similarly increase, so with a 12 foot boat approximately 400 lbs can be safely contained and at 14 foot 400+ lbs. At 16 foot in length a Jon boat can usually hold about 1,000 lbs. An 18 foot Jon boat will hold, on average, about 1,500 lbs.
How much is a 12 foot Jon boat worth?
The purchasing price of a Jon boat will depend on its make, size, construction material and the number of modifications made to the boat. A cheap 12 ft polythene Jon boat can be bought for as little as $550 while an 12 ft aluminum Jon boat can cost as much as $3000. High-end 21 ft Jon boats can cost as much as $30,000.
What size motor can I put on my boat?
The rule of thumb is based on weight alone, and says you should have between 40 and 25 pounds of weight for each horsepower. For example, a 5,000-pound boat could have an engine with between 125 and 200 horsepower.
How fast will a 3hp outboard go?
To give you a simple reference, a 3 hp electric outboard can push a 12 ft boat with 150 kg (331 lbs) load at a max speed of 9 km/h (5.6 mph). That’s to say the 3 hp outboard motor can provide more than sufficient propulsion for a 10 ft tender or work as an auxiliary power for a daysailer of up to 1.5 tonnes (3307 lbs).
How fast can a 3.5 hp motor go?
6 mph). This means that the 3 HP outboard motor can provide more than enough power for a tender of 10 feet or a daysailer of up to 1 feet. A total of 5 tonnes (3307 lbs).How Fast Is A 4 Hp Outboard Motor? RPM Speed Minimum 3.3 knots Medium 7.5 knots Max 12 knots (15 knots with one single person on board).
Do you have to register a jon boat with a trolling motor in Florida?
Florida boating laws: Yes, all vessels used on public waterways with any kind of motor must be titled and registered.
What is a 1436 jon boat?
A 1436 Jon boat is a flat bottom, shallow draft watercraft used almost entirely on inland bodies of water. The 1436 number in the name refers to the length of the boat and the width of its bottom. A 1436 Jon boat is 14 foot long and has a bottom that is 36″ wide.
What is the maximum horsepower for a 12 foot aluminum boat?
You should be able to put up to 15hp on it, but a 4-stroke 15 would be too heavy. The boat manufacturer probably intended it to have a 2-stroke 9.9, but a 4-stroke of that size will probably work.
Can I put a bigger outboard on my boat?
The capacity plate can usually be found inside the transom, or for boats with a steering console, near the wheel. Exceeding any capacities on the plate can result in safety fines by the Coast Guard. For powerboats bigger than 20 feet the answer to, “how big an outboard can my boat handle?” is not so straightforward.
Can you put a bigger outboard than rated?
If a higher than rated horsepower is installed, reinforcing the transom and hull structure may also be required. However, it is important to ensure that weight is considered as a heavier motor could render self-draining cockpits useless and create wet cockpits as water enters scuppers from a sagging transom.
Is a 14 ft boat too small?
It depends on what you’re wanting to do. If you fish solo, a 12′ or 14′ boat is fine. A Carolina Skiff has no vee, so they’ll be as stable as you can expect.
What is a 1448 jon boat?
Overview. The all-purpose, all-welded TRACKER® GRIZZLY® 1448 Jon is a tough, nimble and affordable aluminum jon boat. The deep, roomy interior leaves plenty of room for fishing tackle or duck decoys, and 2 seat bases accept a variety of seating options. GRIZZLY jon boats have a thick, .
What size outboard do I need for a 15 foot boat?
If you are using boats around 10-15 feet in length, such as aluminum or fiberglass boats that are relatively lightweight and do not need a huge amount of power, an engine in the 15-20 horsepower range should suit your needs quite well.
How fast can a 12 ft jon boat go?
12 ft Alumacraft Jon boat w/ 15 hp Evinrude – 27 mph on GPS. That seems wrong to be going that fast in that boat.
How much does a 12ft jon boat weigh?
The average Jon boat weighs about 500 pounds. Jon boats can weigh between 78 to 1056 pounds (35 kg and 483 kg). The weight is dependant on the boat’s constructional material, length and width. This estimate is dry hull weight.
How do you increase the weight on a jon boat?
Ways to Add Buoyancy to a Jon Boat Add flotation pods. Move some of the heavier items to the front. Add PVC tubes. Built-in air cavities for buoyancy. Adding buoyancy using foam.
