Table of Contents
Gas Log Size Firebox Front Width See-Thru Depth (If Applicable) 24 Inches 28-36 Inches 16-18 Inches 26 Inches 30-38 Inches 16-18 Inches 30 Inches 34-42 Inches 16-18 Inches 36 Inches 40-48 Inches 16-18 Inches.
What size fireplace logs do I need?
Begin by measuring the front width, back width, height, and depth of your fireplace. In order to accommodate gas logs, your fireplace should be at least 12-14 inches deep, although some options are available for fireplaces as shallow as 9.5 inches.
Can you use logs in a gas fireplace?
Gas fireplaces cannot burn any form of wood, whether that’s firewood logs or wood pellets. For example, firewood logs typically used in wood burning fireplaces, wood burning stoves or multi fuel stoves, or wood pellets used in pellet stoves, can’t be used in any form of gas fireplace.
What size BTU gas logs do I need?
The formula for calculating the maximum BTU allowed is: Room Width x Room Length x Ceiling Height x 20. You can use this tool below to perform the calculation. Find out why it is important to limit the BTU output of ventless gas logs based on the size of the room!Dec 11, 2009.
What is the standard size of a gas fireplace?
Typical Gas Insert Sizing Most fireplaces, whether gas or wood burning, typically have openings that are nominally 36 inches or 42 inches wide.
How do I choose gas logs?
Determine The Size Of Your Gas Logs Measure the front width of you fireplace. Measure the width at the back of your fireplace. Measure the depth from the front to the back of your fireplace. Measure the height from the top to bottom of the front your fireplace.
Can you use Duraflame logs in a gas fireplace?
Can Duraflame logs be used in a gas fireplace if you don’t turn on the gas? You could use them in a fireplace that has a gas lighter, but not in a gas fireplace as another reviewer stated Gas fireplaces have much smaller flues and are not designed for either the heat or smoke that a real wood burning fire generates.
Can you turn gas fireplace into wood burning?
While it may be tempting to try to burn wood in your existing gas fireplace, that would be quite dangerous unless precautions were taken. It is possible to change from gas to wood burning safely. A professional gas to wood-burning fireplace conversion would be necessary.
Can a fireplace be both gas and wood burning?
If your home came with a gas fireplace previously installed yet you yearn for the smoky aroma and crackle that a wood-burning fireplace offers, you can convert your gas fireplace into a wood-burning one.
What is a good Btu for a gas fireplace?
Although it varies greatly, Regency’s gas fireplaces typically produce between 20,000 and 48,000 BTU’s, enough to heat an apartment or a mid to large room.
How many square feet will 45000 Btu heat?
Heating BTUs Table (Rough Estimates) Home Size (Heating): Standard Climate Very Hot Climate 500 square feet 22,500 BTU 15,000 BTU 1,000 square feet 45,000 BTU 30,000 BTU 1,500 square feet 67,500 BTU 45,000 BTU 2,000 square feet 90,000 BTU 60,000 BTU.
How many square feet will 36000 Btu heat?
Chart of Recommended Heating BTU Per Square Foot Room/Area Size Heating Capacity(BTU) 600 sq ft 27,000-33,000 BTU 700 sq ft 31,000-38,000 BTU 750 sq ft 34,000-41,000 BTU 800 sq ft 36,000-44,000 BTU.
How do you size a gas fireplace for a room?
To calculate fireplace size, measure the width, length, and height of your room in inches. Multiply these three numbers together to determine the room’s volume, then multiply that number by four, which will give you a close minimum heat output. You can select an appropriate size with the original dimensions.
How large should my fireplace be?
For those who must put their TV above the fireplace, we recommend that the fireplace be at least as wide as the TV, and possibly wider. Today’s most popular fireplaces are what we call ‘linear’, meaning they are much wider than they are tall. As these fireplaces get wider, they do NOT get taller.
How big should a fireplace be in a room?
Are there any convenient rules of thumb e.g. choose a fireplace no taller than, say, half the height of the room; make sure it is slightly narrower than the chimney breast? The fire surround should sit somewhere between half way and two thirds the height of the room.
What should I look for in a gas fireplace log?
When shopping for gas logs, you’ll need to choose vented or vent-free logs. This decision comes down to many factors, including looks versus efficiency, local building codes and fireplace placement. With vented logs, you’ll enjoy a large, realistic-looking flame that operates with an open chimney flue or damper.
How do you size a gas log set?
Rear width needs to be at least as wide as the log set Depth should be 12-14 inches. If you are measuring for a see-thru gas log set, the depth needs to be 16-18 inches. The height of the firebox opening should be a minimum of 18 inches to accommodate most gas log sets.
Which is best vented or ventless gas logs?
Ventless fireplaces are more energy efficient than vented fireplaces because no heat escapes up the flue, so you’ll save money on gas utility bills. A vented gas fireplace uses more gas to create the same level of warmth because some of its heat escapes through the flue.
Are all fireplaces the same size?
The Proper Way to Measure Dimensions of a Fireplace. In order to measure your fireplace, you will need to record the height, width, and depth. Firebox, fireplace opening, or cavity, it’s all the same! These names all refer to the same thing.
What are the dimensions of a fireplace mantel?
For a quick reference, a 36-inch fireplace will probably have a mantel width of 48 inches. A 42-inch fireplace will probably have a mantel width of 54 inches. The mantel should not be so wide that it reaches anything else, like a wall, window or door.
What can you burn in a gas fireplace?
A gas fireplace is not designed to burn wood; burning wood in it could be a fire hazard, or, at the very least, fill your home with smoke. Some gas fireplaces have all the necessary safety features to burn wood if you wish to convert the fireplace entirely to a wood-burning version.
Is Duraflame safe for indoor fireplace?
Duraflame makes a product called a Roasting Log for use in outdoor fireplaces or campfires, and though they’re approved for cooking, they don’t make the nice flames of the indoor logs, and they’re not as light-it-and-forget-it as indoor firelogs.
Are Duraflame logs bad for fireplace?
Can duraflame firelogs be burned in all types of fireplaces? Duraflame firelogs are Underwriter Laboratories (UL) Classified for use in zero-clearance manufactured metal fireplaces and are suitable for use in all types of traditional open-hearth wood-burning fireplaces.
