Table of Contents
Commonly used joist sizes are 2-by-6, 2-by-8 and 2-by-10. For example, when you space joists 16″ apart — which is standard for residential decks — a deck spanning 9 1/2′ would require 2-by-6 joists, a 13′ deck would need 2-by-8 joists and a 16′ deck calls for 2-by-10 joists.
Should I use 2×6 or 2×8 for deck joists?
For upper-level decks, 2×10 is recommended as the minimum size to use for strong guard post connections. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decking is not strong enough to support longer spans than 16″.
How far can you span a 2×6 for decking?
Decking made of 2x4s or 2x6s can span up to 24 inches. If you will run decking at an angle, you might need to put the joists closer together.
How thick should joists be on a deck?
16” on center = Standard for residential decking applications. 12” on center is recommended for a sturdier underfoot feel, when using standard deck board thickness of 1”. 24” on center = Sometimes used for commercial applications such as docks and boardwalks; wider joist spacing requires greater deck board thickness.
How far can a 2×6 decking span without support?
2-grade 2×6 joists can span up to 10 feet 9 inches from beam to beam when spaced the standard 16 inches apart with a maximum live load of 30 inches per square foot.
Can I use 2×8 for deck boards?
Q: Can I use 2×8 treated lumber as deck boards? A: No, that’s a not a good idea. Lumber wider than 6 inches should not be used as a flat surface. Wide, flat boards have a tendency to pool rain water, which can lead to cupping problems.
Can I use 2×8 for deck joists?
2×8 for joists will be fine, with 16″ OC. Should use 2×10 for beams but 2×8 will be fine as well. If you are worried you can triple the 2×8 for the beams but double will be sufficient. You should put the beams at 7 and 14 feet out from the house, with the piers you should do 3 per beam with spacing of 1, 7, 13.
How many joists do I need for a 12×12 deck?
For example, a 12-foot x 12-foot deck of 5/4 x 6 pressure treated wood decking on 16 inches on center spacing of joists will require: A 12-foot long deck with joists 16 inches on center will require 10 joists.
Can I use 2×6 for deck frame?
Or are 2x6s to small for deck joists? You can use 2×6 as deck joists if the deck is low enough to the ground as not to require guard railing. When using S-P-F 2×6 deck joists, the span must not be greater than 9’0″ (2.73m) with joists at 16″ o.c. (400mm), and 9’10” (3.01m)with spacing at 12″ (300mm).
Are 2×6 OK for floor joists?
Yes, 2 X 6 lumber can be used for floor joists, but the allowable clear span is only about 4 or 5 feet. Such a small span is seldom useful.
Can I use 4×2 for decking joists?
4 x 2 Timber Rail / Joist. These decking joists are the most common sized framing timber for decking. They provide a solid structure for fixing your decking boards too. When making your decking frame you should use a 400mm spacing between your timber joists.
How far apart do you put floor joists on a deck?
How Far Apart Should You Space Deck Joists? The short answer: deck joists are typically spaced either 12 inches or 16 inches apart, on center.
How far can a 2×8 joist span without support?
But first, generally, how far can a 2×8 span without support? Depending on various factors, the maximum span for a 2×8 floor joist is 16′ 6”. The maximum span for roof rafters is 23′ 9”. For headers, the maximum span is 11′ 2”.
What size bearers and joists for a deck?
The bearers have to carry the weight of the entire deck and whatever is put on top of it, so they need to be strong. A 140×45 treated pine bearer will usually do the trick. Every 1.2 metres, a 90×90 H4 treated pine post will be needed.
How much weight can 2×6 floor joists hold?
The Codes allow for a 2×6 joist to support 53lbs per linear foot, which means an 8.5-foot length could support approximately 450-pounds across that length. Although a 2×6 will support more before failing, the aim is to prevent it from failing. Shortening the span may also increase the amount the wood can support.
How many joists do I need for a 20 foot deck?
A 20-foot wide deck, for example, would require two beams: one at 10 feet and one and 20 feet in order to support a deck with 2×8 joists spaced 16 inches apart.
What is 2×8 lumber used for?
2×8 Yellow Pine Lumber, #1 Grade, S4S Kiln-dried and #1 framing grade. This board is a more economical choice and often used for construction, rustic furniture making and bed frames. Boards are S4S where both side and edges are planed smooth.
Should I use 2×4 or 2×6 for deck?
Most builders stick to using a minimum of 2x6s for deck floor joists. If you want to add guardrails and stairs, you need at least 2x10s. 2×4 and 2×6 joists are ideal for ground-level decks without guards.
What is deck blocking?
Deck Blocking And Bridging Probably, the most commonly used technique is to install small pieces of material in a zig-zag pattern between the perimeter joists to create a rigid rim joist that prevents bounce and increases the strength of the rail attachment.
How far can a 2×10 beam span without support?
How Far Can a 2×10 Beam or Header Span? A 2×10 beam – made up of two 2x10s nailed together – can span up to 11′ without support beneath a deck that is 4′ wide. For a more normal-sized deck, the same beam can span 8′, supporting a deck that is 8′ wide. You can also triple a 2×10 beam.
