Table of Contents
Drywall comes in sheets. While the most common size is 4 x 8 feet, you can purchase much larger lengths. Use a sheet size that minimizes the number of seams that will appear in the finished product. Drywall comes in various thicknesses, 3/8 inch and 1/2 inch being the most common.
What sizes does sheetrock come in?
The standard horizontal lengths of drywall are 8, 9, 10, 12, 14 and 16 feet. The 8-, 12- and 16-foot lengths work well for residential construction, so most retail hardware stores carry them. Buy the longest boards feasible for your project.
What is the difference between sheetrock and drywall?
Sheetrock. Sheetrock is a brand of drywall that is a registered trademark of the U.S. Gypsum Company. With the exception of a couple of chemicals that allow the Sheetrock formula to be patented, there is practically no difference between Sheetrock and other drywall.
How thick is sheetrock on a ceiling?
One-half inch panels are standard on the ceiling. Drywall comes in large, flat, gypsum-core panels wrapped with a strong, paper skin. The panels, which are 4-feet wide, are available in lengths ranging from 8 to 16 feet.
What is the actual size of 1/2 drywall?
Drywall is sold in several standard thicknesses: 1/4-inch (6.35mm) 3/8-inch (9.52mm) 1/2-inch (12.7mm).
How much is a 4×8 sheet of Sheetrock?
The average price for drywall and sheetrock is $15 per 4′ x 8′ panel, with a typical range of $12 to $20 per panel. This translates into a cost of $0.40 to $0.65 per square foot.
What is the difference between standard and lightweight drywall?
Lightweight: Lightweight drywall is generally used the same way as standard drywall, but it’s easier to carry and hang because it’s 25% lighter. Fire-Resistant: This type of drywall normally contains chopped fiberglass in its core for extra fire resistance.
Is sheetrock stronger than drywall?
Sheetrock is a brand of drywall patented by the US Gypsum Company. Both are used to make walls and ceilings. Aside from a few chemicals that allow the sheetrock formula to be patented, there is really no practical difference between drywall and sheetrock whatsoever. In fact, most people refer to them interchangeably.
Why is sheetrock so expensive?
There are a bunch of reasons drywall prices can rise. As with most commodities, increased demand or decreased supply can have an affect on drywall board prices. You don’t want to set up your construction loan and then find out prices have skyrocketed for the building materials.
What thickness sheetrock should I use?
Most drywall measures 1/2-inch thick. It’s the most common choice for interior walls because they are easy to carry and hang. If weight is a concern, consider ultra-light half-inch drywall.
Can you use 1/2 inch drywall ceiling?
1/2-Inch-Thick Drywall Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. These panels are easy to carry and hang.
What kind of drywall do you use in a bathroom?
Green. Green drywall is a type of drywall that’s mold resistant and is used in applications where moisture can be an issue—so most commonly, bathrooms. To maximize the mold resistance, use mold-resistant drywall mud, aka joint compound. Green drywall generally costs about 20% more than regular drywall.
Is it better to hang drywall vertical or horizontal?
On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits. Fewer seams. Horizontal hanging reduces the lineal footage of seams by about 25%.
How far apart are studs?
The general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.
What mud do you use for drywall?
Topping compound is the ideal mud to use after the first two coats of taping compound have been applied to a taped drywall joint. Topping compound is a low-shrinking compound that goes on smoothly and offers a very strong bond.
How many sheets of drywall do I need for a 12×12 room?
You can both estimate the total square feet of drywall, also known as gypsum board, you’ll need and the number of sheets.How to Estimate Drywall or Sheetrock. Sheet Size Square Feet 4×8 32 4×9 36 4×10 40 4×12 48.
How much would it cost to drywall a $1500 sq ft house?
Average Cost to Drywall a House by House Size Cost to Drywall a 1000 sq ft House Total Cost Cost to Drywall a 1500 sq ft House Low x 5500 square feet $7,975 Average x 6325 $12,100.
What is the cost to install Sheetrock?
The national average materials cost to install sheetrock is $0.53 per square foot, with a range between $0.45 to $0.61. The total price for labor and materials per square foot is $1.85, coming in between $1.63 to $2.06. A typical 500 square foot project costs $922.92, with a range of $816.36 to $1,029.48.
How much does a 4×8 sheet of 1/2-inch drywall weigh?
A conventional 1/2-inch thick sheet of drywall measuring 4 x 8 feet weighs around 57 pounds. According to drywall maker USG, a 4 x 8-foot sheet of Sheetrock brand UltraLight Panel weighs 13 pounds less, for a total of 44 pounds.
Should drywall touch the floor?
Always leave a 1/2-inch gap at the floor. This allows for floor and wall expansion without cracking the drywall. It also helps prevents moisture wicking if the floor floods. Wear work gloves, safety goggles and a dust mask when hanging drywall.
What kind of drywall do you use in a garage?
Drywall is the easiest and most economical covering for your garage ceiling. Use 5/8-in. -thick drywall if your trusses or rafters are spaced 24 in.
Why is it called Sheetrock?
The name “drywall” refers to the fact that walls made of the material are installed without the use of water. A major problem with plaster had been the extremely long drying time associated with it, as it was installed wet, and installers had to wait for the previous layer to dry before installing the next one.
Can you put Sheetrock over Sheetrock?
Studs. Hanging new drywall over existing walls is very similar to hanging drywall in a new construction setting. This process is relatively simple with walls that are paneled because you can actually see the original nail holes with the naked eye. Just follow the holes to the ceiling and make a mark.
