Table of Contents
What size impact wrench do I need for automotive work? A 1/2-inch impact wrench is large enough to handle the power needed to perform most repairs on regular day to day daily driving vehicles.
What size impact wrench is best for lug nuts?
A good impact wrench for lug nuts should measure ⅜-inch or ½-inch. These two sizes provide enough power to remove even the toughest lug nuts without applying excessive torque.
What impact wrench is best for cars?
Quick Comparison Table Name Comfort 1) Milwaukee 2767-20 M18 Fuel High Torque 1/2″ Automotive Cordless Impact Wrench Review 5 2) Dewalt Dcf899P1 20V Max Xr Brushless High Torque 1/2″ Automotive Cordless Impact Wrench Review 4.9 3) Ingersoll Rand W7150-K1 ½” Hi-Torque One Battery Automotive Cordless Impact Wrench Kit Review 4.9.
How much torque do you need for an automotive impact wrench?
An impact wrench needs about 500 ft-lbs of torque to remove lug nuts. In most cases, you will need the same amount of torque you used to tighten the lug nut in order to remove it. So, if you over-tightened it, you might need more than 500 ft-lbs torque.
How much torque do I need for automotive work?
Very heavy duty automotive fasteners require between 200 and 1,000 ft. lbs of torque, or even higher amounts. Applications include camshaft sprockets and harmonic balancers. Many off-road vehicles or performance racing vehicles will require torque applications in this range as well.
What size impact driver do I need for automotive?
What size impact wrench do I need for automotive work? A 1/2-inch impact wrench is large enough to handle the power needed to perform most repairs on regular day to day daily driving vehicles.
Is a 3/8 impact good for lug nuts?
Yes, you can, however you need to break them loose first with a breaking bar or socket, otherwise an impact wrench won’t have enough power to break loose these very tight lug nuts.
How many ft-lbs should lug nuts be?
New wheels should be re-torqued after the first 50 to 100 driving miles. Hardware Bolt or Stud Size Typical Torque Range in Ft/Lbs Minimum Number of Turns of Hardware Engagement 12 x 1.5 mm 70 – 80 6.5 12 x 1.25 mm 70 – 80 8 14 x 1.5 mm 85 – 90 7.5 14 x 1.25 mm 85 – 90 9.
How many pounds of torque do I need to remove lug nuts?
An impact wrench with a minimum of 500 ft-lbs torque is required to remove lug nuts. What tool do you use to remove lug nuts? An impact wrench works best, either battery-powered or air-operated.
What is the strongest 1/2 inch impact?
Our runner-up choice for best overall air impact wrench is the Aircat 1150 Killer Torque 1/2-inch drive impact wrench. Featuring 900 pound-feet maximum torque and 1,295 pound-feet loosening torque, Aircat advertises the 1150 as the most powerful 1/2-inch impact wrench in its class.
Is 400 Nm torque good for impact wrench?
This feature-rich, 400 Nm impact wrench has a powerful motor that means you can tackle tough wheel nuts and other automotive projects.
Is 450 ft-lbs enough?
When you actually do have some real mechanical work to do, rather than horsing around with those bite-sized sub-compact models, reach for something in the 450 ft-lb torque range. This middle range probably covers the vast majority of automotive work.
How much torque does a 1 inch air impact have?
1″ Pneumatic Impact Wrenches, Maximum Torque 3000 ftlbs.
What impact wrench has the most torque?
Our top pick is the DEWALT 20V Max XR Lithium-Ion Cordless Impact Wrench because it has 700 ft-lb of maximum fastening torque, 1,200 ft-lb of nut-busting torque, and a brushless motor that will extend its life.
What size torque wrench do I need?
The bigger the drive and the longer the handle, the more torque they can deliver. Most home mechanics will find that a torque wrench with a 1/2-inch drive and at least an 18-inch handle is the best choice for lug nuts, cylinder heads, suspension bushings, and other likely uses.
Do Impact drivers have torque settings?
Impact drivers do not have torque control, so the only way to adjust the amount of torque being delivered is by using the speed control trigger (or by selecting a model with several gears).
What do you use a 1/4 impact driver for?
Impact drivers with 1/4 inch hex drivers can be used to strip off smaller nuts, trim screws, and bolts. For larger lug nuts, a 1/4 inch square drive impact driver or impact wrench is the better option. Automotive parts, when installed properly, are torqued to the right tightness.
What is a 3/8 impact wrench used for?
Due to its form factor, a 3/8 impact wrench presents the better option if you want to achieve precision while fastening or removing nuts and bolts. Even though their motors are a bit weaker, 3/8 impact wrenches will allow you to focus all the torque of that tool in one point more easily than with the 1/2 impact wrench.
Will a 1/4 inch impact driver remove lug nuts?
Technically, the answer is yes. Realistically, the answer is no. A quick glance at a lug nut torque chart shows that most lug nuts should be torqued between 80 and 100 ft-lbs. Many 18V-class impact drivers can achieve this torque, and Milwaukee’s M12 Fuel impact driver tops out at 1200 in-lbs.
